Perfect fit by: Richard hecht ✔Verified Buyer from: Metuchen, NJ on: November 7, 2016 |
|
Easy to install. Quality much better than what's available in retail stores. |
|
The opening (width) on my cabinet is 11 inches. There are no side panels. Will your product work? - Asked about product KV-SCB9-1-20WH | ||
KV-FYSCB9-1-20WH would require a minimum of: 9" W x 20-1/2" D x 17-13/16" H. The rail would require a floor mount. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
I am planning on ordering a pull-out trash can, part # SCB9-1-20WH. Do you also sell the door mounting bracket, part # PDMKTWH? - Asked about product KV-SCB9-1-20WH | ||
The door mount bracket is item #KV-PDMKTPT and is listed under accessories on the item page for item #KV-FYSCB9-1-20WH. Click here |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
Does this the improved version with the handle to assist pulling the unit out? Is there a lid for it? - Asked about product KV-SCB15-1-20WH | ||
Item KV-SCB15-1-20WH does have a handle that once the cabinet is opened, you would use the handle to pull the unit out. There is a lid available, which is listed in the accessories but would need to be purchased separately. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
I have a standard kitchen cabinet under my sink, but because of plumbing cannot install an under-counter trash can with the usual orientation of the narrow part of the can facing front and the can depth extending into the back of the cabinet. I have about 12"between the door and the pipe. Will one of your wide mount cans fit inside of the cabinet? There is plenty of space under the plumbing for the sliding hardware to extend. Right now, I have a 15W x 11D x 17T regular garbage can under the sink, but would love one that can pull out. Thank you - Asked about product KV-SCB10-1-35PT | ||
The manufacturer recommends the 20 quart trash can for your cabinet:
KV-SCB15-1-20: Minimum Cabinet Opening Dimensions: 15" W x 20-1/2" D x 17-13/16" H Overall: 14-3/8" W x 20-1/8" D x 17-5/16" H Sliding Assembly: 14-3/8" W Capacity: 20 Quarts (5 Gallons) Maximum Load Capacity: 30 lbs. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
I see total depth is 20 1/8 which is fine, but you can you tell me the depth needed at the top of the plastic bin - need to see if it will clear the plumbing. Thanking you. Reagan - Asked about product KV-SCB10-1-35WH | ||
The dimension from the very front of the SCB10-1-35WH unit to the back edge of the top of the bin is 14-7/8". |
||
100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||