1.800.667.8721 or Live Chat (9AM - 6PM EST)
Federal Brace Freedom Hidden Granite Countertop Bracket in Multiple Sizes and Finishes
Bracket in Steel
Federal Brace Freedom Granite Countertop Bracket, Steel
Federal Brace Freedom Granite Countertop Bracket, Steel
Bracket in Black
Bracket in White
Made in the USA - In Black or Cold Rolled Steel
Shop for similar items:
Features:
- Federal Brace Freedom Hidden Granite Countertop Bracket, Steel
- Hidden-brace design creates a floating countertop appearance and provides maximum leg room
- Available in with Black or White powder coated finish
- Made from 1008 Cold Rolled Steel
- Non-gusseted bracket: Suggested use only as supplemental support
- Optional Bracket Backers available to protect Mounting Surface (See Optional Bracket Backers)
-
Made in the USA
- Optional 39972 Install Kit:
- Includes: 12 Screws (1/4'' x 2-1/2'' Hex Lag Screw) and Clear Silicone Sealant
- Kit Sold Separately
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
Available Sizes:
8''W x 2''D x 8''H
10''W x 2''D x 12''H
10''W x 2''D x 12''H
14''W x 2''D x 14''H
16''W x 2''D x 16''H
18''W x 2''D x 18''H
20''W x 2''D x 20''H
Weight Capacity: 375 lbs each
Recommended Bracket Span: 18" - 20"
Flange Width: 2"
Mounting Hole Diameter: 1/4"
Maximum Span: 20"
Available Sizes:
8''W x 2''D x 8''H
10''W x 2''D x 12''H
10''W x 2''D x 12''H
14''W x 2''D x 14''H
16''W x 2''D x 16''H
18''W x 2''D x 18''H
20''W x 2''D x 20''H
Weight Capacity: 375 lbs each
Recommended Bracket Span: 18" - 20"
Flange Width: 2"
Mounting Hole Diameter: 1/4"
Maximum Span: 20"
Description:
Make the most out of a small space with Federal Brace's Freedom Brackets. Innovative hidden-bracket design creates a floating-counter appearance that provides maximum leg room so you knock knees no more! Proudly crafted in the USA, the Freedom brace is constructed from Cold Rolled Steel with an optional Black Finish.
Ship Method:
- Ships via UPS/FedEx Ground
Product Reviews:
 | Good strong bracket, nicely painted by: PAUL MENDITTO ✔Verified Buyer from: BUSHKILL, PA on: February 4, 2021 |
| Just what I needed to support my new countertop. |
|
| Good strong bracket, nicely painted by: PAUL D MENDITTO ✔Verified Buyer from: Bushkill, PA on: January 26, 2021 |
| After installing the two brackets I needed, I liked the way they looked under my counter, so I ordered more and installed them just for show. |
|
| ... by: anonymous ✔Verified Buyer from: -, - on: June 10, 2019 |
| quality craftsmanship. Looks great. |
|
| Can't find better quality brace! by: Ranae ✔Verified Buyer from: Morrison, IL on: May 1, 2019 |
| We had a moveable island instead of anchored, so needed a product to support the quartz countertop, but not limit our leg room with corbels or other supports. These brackets may cost a bit more, but you are getting what you pay for. They are produced from heavy dut piece of steel. There is not a weld at the right angle that could weaken over time. If yo need support for a counter top, these are what you need. You can purchase the screws/bolts to anchor or buy the kit to attach it. |
|
 | Product seems to be good by: Steve Dailey ✔Verified Buyer from: Dimondale, MI on: July 22, 2014 |
| We received our order very quickly. We have not actually used the product yet, waiting for our kitchen cabinets to come in then ordering our granite for our counter tops. The bases are going to be used to give our granite counter top support. They look good, good metal but we will see how much support they give after we install them. Will write a review after they are installed. |
|
| Just what I was looking for. by: Rich L. ✔Verified Buyer from: Long Beach, NY on: August 26, 2013 |
| Very sturdy build to support the weight of my cantilevered granite table. |
|
Your questions that we answered:
 | I would like to conceal the vertical leg of the bracket behind wall board. What fasteners would you recommend that I use so that I can place the wallboard directly over the vertical legs of the bracket without furring out the wall? If flush fasteners are not recommended, please advise what fasteners you do recommend. - Asked about product FB-30058 | |
 | Item FB-39972 is a optional installation kit that comes with:
12 screws (1/4" x 2-1/2" Hex Lag Screw) Clear silicone sealant This kit will install 3-4 brackets depending on the number of holes in the bracket. We would only be able to recommend the screws that come with the kit, as we only know of the brackets being installed with these. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| I cannot find what the thickness of this freedom bracket is. Our counter fabricator says we need 3/8". I read somewhere that this bracket comes in 1/4", 3/8", and 1/2" thicknesses. - Asked about product FB-30053 | |
| The thickness depends on the size of the bracket:
Material Thickness: 1/4" - (8x8 - 12x12) 3/8" - (14x14 - 16x16) 1/2" - (18x18 - 20x20) |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| I was wondering if you had the 12x12 in black finish. I believe the FB # is 30049 according to their website. Thank You for your help. - Asked about product FB-30048 | |
| Yes, we have access to this support bracket in black (FB-30049). Please, contact 800-667-8721 for updated pricing. |
|
| 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
An Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
