top_bar
 
top_bar
top_bar
top_bar
1.800.667.8721 or Live Chat (9AM - 6PM EST)
| S and P Range Hoods | S and P Bathroom Fans | All Range Hoods | All Bathroom Fans | Other Kitchen Items | Other Bathroom Items |
Top

S&P Inline Mixed Flow Duct Fan - TD Series

(9)
S&P TD100 Standard Exhaust Kit (Single Vent), 4" Duct w/ 9-1/8"W Fan
KIT-TD100 Bathroom Single Exhaust Kit
S&P TD Series 14" Diameter Inline Mixed Flow Duct Fan, 2090 CFM, 115V/60Hz, 522-Watt, 3.9 Amps, 1536 RPM
14" Diameter Inline Mixed Flow Duct Fan
S&P TD Series 16" Diameter Inline Mixed Flow Duct Fan, 3127 CFM, 115V/60Hz, 916-Watt, 6.3 Amps, 1559 RPM
16" Diameter Inline Mixed Flow Duct Fan
S&P TD Deluxe Exhaust Kit (Double Vent)
KIT-TD150-DV Bathroom Double Exhaust Kit
S&P TD Standard Lighted Exhaust Kit (Single Vent-LED)
TD100 Lighted Bathroom Exhaust Kit
S&P TD Deluxe Lighted Exhaust Kit (Dual Vent-LED)
TD150 Lighted Bathroom Exhaust Kit
S&P Inline Mixed Flow Exhaust Fan for 4" Duct 107 CFM
TD100 - TD150 Inline Bathroom Fan
S&P Inline Flow Exhaust Fan for 12-2/5" Duct 1089 CFM
TD315 Inline Bathroom Fan
Easy Cleaning
Easy Cleaning
Range Hood Illustration
Range Hood Illustration
Bathroom Illustration
Bathroom Illustration
Available for Use as a Bathroom or Rangehood Fan
Choosing a Range Hood - Tips from an ExpertTips from an Expert - How to Choose the Right Range Hood for your Home


Step 1: Choose a Fan
Step 2: Order Optional Accessories Click here
$111.14 - $497.95
Model:
Choose a product below
Shipping:
Free Shipping
Qty?
Features:


Description:
These TD series inline duct fans by S&P make a great addition to any kitchen, bathroom, utility room or any other room that needs a duct fan with low noise levels. The inline mixed fans are available for 4",5",6",8",10" and 12-2/5" ducting. The exhaust fans come with class B motor insulation, direct two-speed connection and variable speed settings. The removable body makes installation easier. Models TD-100, TD-100X, TD-125 and TD-150 are manufactured in tough, reinforced plastic. The TD-150, TD-200 and TD-315 models have sealed for life ball bearings. All motors include direct two-speed connection and are also suitable for voltage speed control. The inline mixed fans come with a five-year limited warranty and electronic accessories come with a one-year limited warranty.
Additional Information:
Ship Method:

Optional Electronic Accessories - Variable Speed Controls:
SL-2525.5UL
S&P Variable Speed Control Rotary Type (5 Amp)
$31.07$44.38
How Many?
SL-FLTD-60
S&P Fan/Light Delay Timer Switch
$194.74$296.92
How Many?
SL-SCS5
S&P Speed Control Slide Type (5 Amp)
$80.64$124.18
How Many?
SL-SCR-10
S&P SCR-10 Variable Speed Control Rotary Type HD (10 Amp)
$77.72$117.31
How Many?
SL-SCR-15
S&P SCR-15 Variable Speed Control Rotary Type HD (15 Amp)
$102.00$156.43
How Many?
SL-SCR-210
S&P SCR-210 Variable Speed Control Rotary Type HD (10 Amp/230V)
$84.50$126.70
How Many?
SL-EPBT-60
S&P Electronic Push Button Timer
$68.61$103.31
How Many?
SL-SRT30
S&P Rotary Spring Wound Timer
$48.23$77.26
How Many?
SL-2525.10
S&P SC-25 Variable Speed Control Rotary Type (10 Amp)
$75.93$108.48
How Many?
SL-CVC-100
S&P Continuous Ventilation Control to be used with TD-100
$38.25$60.11
How Many?
SL-CVC-100x
S&P Continuous Ventilation Control to be used with TD-100x
$38.25$60.11
How Many?
SL-CVC-150
S&P Continuous Ventilation Control to be used with TD-150
$38.25$60.11
How Many?
Matching Items:
Product Reviews:
Works great
by: Phil K.     from: Hereford, OR      on: August 8, 2013
 Very well built. At highest spped, it is about as loud as a standard issue 'cheap' 160cfm - 6" diam fan you find in must budget range vents, but it's 1080cfm! This fan has a high/low speed


Beautiful
by: John C Randall     from: Mineral City, OH      on: March 9, 2011
  Not only is it fantastic looking, it also kicks butt when it is moving air.


looks really cool!
by: Erik Price     from: Orange, CA      on: January 4, 2011
 The fan is not yet installed (which is why I can't give it 5 stars yet), but looks really cool. Much higher quality than what is sold at 'box stores'. Had a mis-communication with the order, but that worked out fine.


Surprisingly Quiet!
by: J Gillis     from: Falls Church, VA      on: December 6, 2010
 Installation was a breeze. The fan is extremely quiet, my wife loves that you can't even hear it over the running water of the shower.


super quiet and powerful
by: jeffrey wayne murphy     from: walnut creek, ca      on: October 22, 2010
 


Excellent performer
by: Bill Trost     from: Shorewood, WI      on: October 15, 2010
 Easy installation, quiet running, moves a lot of air.


Installed with double vent kit in commercial bathrooms.
by: Mr Handyman     from: Chesterfield, MO      on: May 27, 2010
 Installation was a breeze. The fan was extremely quiet. Perfect for drop ceiling applications where the fan can't sit on the ceiling tiles.


vry good
by: Ralph Wuest     from: Douglaston, NY      on: October 22, 2009
 I purchased your duct in-line fan and it works perfectly. I had to tie it into an existing 4" duct which was difficult but the mounting brackets made it relatively easy. All went exceptionally smoothly but when I wanted to wire it up, the wiring diagram did not match up with what was on the fan. Fortunately, anyone with a bit of knowledge could figure out the correct way to wire it.


Best fan ever
by: steve green     from: San Jacinto, ca      on: September 23, 2009
 Easy to install,can barly here it running and very power full.My customers love them.


Your questions that we answered:
How many amps are SL-TD-100 and SL-TD-100x? I would like to use my existing countdown timer switch.   - Asked about product SL-TD-100X
 The TD-100 is 0.45 amps and the TD-100X is 0.71 amps.
 50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1)

Which switch would you recommend using with this in line fan? Thanks Craig Milley   - Asked about product SL-TD-125
 We recommend a 5 AMP Speed Control . Here is a great option: SL-2525.5UL
 60% of 5 people found this useful. Was this useful to you? Yes (3) | No (2)

What is the difference between the pv and the td series inline duct fans?   - Asked about product SL-TD-200
 The difference between the TD line and the PV line is in the design & how the air is moved.

The TD line is a mixed flow fan which is a special overlap blade propeller with straightening vanes
in the housing which allows the fan to perform well when there is ductwork installed. Traditional propellers
do not perform well at all when there is ductwork installed. The TD-200S has a maximum total installed
duct length of 60 feet.

The PV line is a centrifugal impeller (squirrel cage) which will deliver higher CFM with long duct runs installed.
The PV-200 can be operated with 80-100 feet of total installed duct length.
 67% of 6 people found this useful. Was this useful to you? Yes (4) | No (2)

Which variable speed controller should I get for this fan?   - Asked about product SL-TD-200
 The 2525.5UL (Variable Speed Controller) is recommended: Click here
 50% of 4 people found this useful. Was this useful to you? Yes (2) | No (2)

Have 6" TD 150 would like to tie it into a 8" discharge duct and into a 8" suction with a back draft at the fan in the discharge,any negetive affects from this arrangement also discharge will be approximate 13'.Thanks.   - Asked about product SL-TD-150
 The TD-150 has a maximum total duct run of 35’ and each elbow is equivalent to 5’ of duct so it sounds as if the duct length is within those parameters. The larger duct diameter will not have a negative effect on the performance
 60% of 5 people found this useful. Was this useful to you? Yes (3) | No (2)

What is the sone rating on this fan?   - Asked about product SL-TD-250
 This sone rating for this fan (SL-TD-250) is 5.
 60% of 5 people found this useful. Was this useful to you? Yes (3) | No (2)

Can I use this inline fan as a bathroom exhaust.   - Asked about product SL-TD-150
 Yes this can be use as a bathroom exhaust.
 50% of 4 people found this useful. Was this useful to you? Yes (2) | No (2)

I am looking to install this as an additional fan for a microwave vent. How far downstream from the rangehood should the fan be mounted to avoid issues caused by heat. This is an install for a customer who wants to do indoor grilling.   - Asked about product SL-TD-100X
 You should install the unit at least 5ft away, however in the application you have described we recommend that you use the TD-150 (6” duct) but preferable the TD-200 (8” duct). If you have to use the 4” duct then you should go with the PV-100X found on this page: Click here
 60% of 5 people found this useful. Was this useful to you? Yes (3) | No (2)

I need a duct fan that is almost silent. what is the sound level of the TD-MIXVENT fans. TD-MIXVENT fan enables the unit to generate large air volumes and pressures with the minimum of in-duct or radiated noise   - Asked about product SL-TD-150
 Yes, it’s pretty quiet. The sound level for the TD-150 is 2.8 sones out of 10.
 50% of 4 people found this useful. Was this useful to you? Yes (2) | No (2)

is this fan reversible?   - Asked about product SL-TD-200
 No, this fan is not reversible. It blows in one direction however, it's inline, so you can mount it in any direction.
 40% of 5 people found this useful. Was this useful to you? Yes (2) | No (3)

Would this be sutiable for use in a downdraft range application? I am concerned with the 104 degree max inlet temperature and the plastic fan and housing. It will be mounted downstream, possibly up to 10' away.   - Asked about product SL-TD-150
 We would not recommend the use of plastic fans for range hoods rather, we would recommend PV-150 (or PV-150X) which will ensure efficient operation up to 140 degrees.

Click here
or
Click here
 57% of 7 people found this useful. Was this useful to you? Yes (4) | No (3)


An Aoife Company LLC Store
1136-1146 Stratford Avenue, Stratford, CT 06615
Tel: (203) 374-5425    Fax: (203) 373-0810
email: support@kitchensource.com