top_bar
 
top_bar
top_bar
top_bar
1.800.667.8721 or Live Chat (9AM - 6PM EST)
Home >> Kitchen >> Range Hoods >> S and P Range Hoods
Top

S&P Direct Connection Backdraft Dampers

(4)
S&P 14" - 16"  Diameter Galvanized Steel Backdraft Damper, Spring Loaded
Galvanized Steel Backdraft Damper

Off-White Epoxy Coated Steel
Off-White Epoxy Coated Steel
Steel
Steel
Choosing a Range Hood - Tips from an ExpertTips from an Expert - How to Choose the Right Range Hood for your Home
$24.34 - $148.09
Model:
Choose a product below
Shipping:
Free S/H on S and P orders over $99!
Qty?
Shop for similar items:
S&P Push Button Point-of-Use Control, For use with TR70/TR130/TR200/TR300 Ventilators
S&P Push Button Point-of-Use Control, For use with TR70/TR130/TR200/TR300 Ventilators
$40.50
S&P Round Adjustable Metal Elbow, 4'' or 6'' Sizes Available
S&P Round Adjustable Metal Elbow, 4" or 6" Sizes Available
$9.72
S&P Flexible Insulated Round Duct, 4'' - 10'' Sizes Available
S&P Flexible Insulated Round Duct, 4" - 10" Sizes Available
$69.54
S&P 4'' Plastic Exterior Fixed Grill
S&P 4" Plastic Exterior Fixed Grill
$13.87
 SCR-10 Variable Speed Control Rotary Type HD (10 Amp)
SCR-10 Variable Speed Control Rotary Type HD (10 Amp)
$79.66
S&P Galvanized Steel Vent Mounting Connecting Clamp with Insulated Rubber Duct Seal, 4'' - 12-2/5'' Sizes Available
S&P Galvanized Steel Vent Mounting Connecting Clamp with Insulated Rubber Duct Seal, 4" - 12-2/5" Sizes Available
$44.68
 Fan/Light Delay Timer Switch
Fan/Light Delay Timer Switch
$198.45
 Variable Speed Control Rotary Type (5 Amp)
Variable Speed Control Rotary Type (5 Amp)
$32.03
S&P Galvanized Steel In-Line Duct Silencer, 8'' - 12-2/5'' Sizes Available
S&P Galvanized Steel In-Line Duct Silencer, 8" - 12-2/5" Sizes Available
$234.44
S&P Adjustable Grill Interior Air Inlet Valve, Plastic or Metal, 4'' - 8'' Sizes Available
S&P Adjustable Grill Interior Air Inlet Valve, Plastic or Metal, 4" - 8" Sizes Available
$26.23
S&P TD Rectangular Duct Connector, 4'' - 12-2/5'' Sizes Available
S&P TD Rectangular Duct Connector, 4" - 12-2/5" Sizes Available
$64.89
S&P TD Plastic Mesh Grill, 4'' - 12-2/5'' Sizes Available
S&P TD Plastic Mesh Grill, 4" - 12-2/5" Sizes Available
$47.36
S&P Wall Direct Drive Axial, Various Choices Available
S&P Wall Direct Drive Axial, Various Choices Available
$376.03
 SC-25 Variable Speed Control Rotary Type (10 Amp)
SC-25 Variable Speed Control Rotary Type (10 Amp)
$75.93
S&P TD Series Circular Fan Duct Connector, 5'' - 10'' Sizes Available
S&P TD Series Circular Fan Duct Connector, 5" - 10" Sizes Available
$39.06
S&P Galvanized Steel Duct Fan Roof Cap Vent with Damper Flap Closure, 4'' - 10'' Sizes Available
S&P Galvanized Steel Duct Fan Roof Cap Vent with Damper Flap Closure, 4" - 10" Sizes Available
$43.70
S&P Dryer Booster High Current Switch 120V
S&P Dryer Booster High Current Switch 120V
$68.97
S&P Duct Increaser/Reducer, Different Sizes Available
S&P Duct Increaser/Reducer, Different Sizes Available
$16.63
S&P Percentage Timer Control, For use with TR70/TR130/TR200/TR300 Ventilators
S&P Percentage Timer Control, For use with TR70/TR130/TR200/TR300 Ventilators
$81.08
S&P Tubular Duct - Drive Axial, Various Choices Available
S&P Tubular Duct - Drive Axial, Various Choices Available
$445.61
S&P PV Inlet Wire Guard, 4'' - 12'' Sizes Available
S&P PV Inlet Wire Guard, 4" - 12" Sizes Available
$16.89
S&P Aluminum Louver Shutter, 14'' - 20'' Sizes Available
S&P Aluminum Louver Shutter, 14" - 20" Sizes Available
$123.36
S&P UV Stabilized Plastic Louvered Shutter Wall Cap, White, 4'' - 6'' Sizes Available
S&P UV Stabilized Plastic Louvered Shutter Wall Cap, White, 4" - 6" Sizes Available
$16.10
S&P Percentage Timer Control with Furnace Interlock, For use with TR70/TR130/TR200/TR300 Ventilators
S&P Percentage Timer Control with Furnace Interlock, For use with TR70/TR130/TR200/TR300 Ventilators
$101.03
S&P 8'' UV-Stabilized Plastic Louvered Shutter Wall Cap, Gray, 8'' - 20'' Sizes Available
S&P 8" UV-Stabilized Plastic Louvered Shutter Wall Cap, Gray, 8" - 20" Sizes Available
$72.49
 SCR-15 Variable Speed Control Rotary Type HD (15 Amp)
SCR-15 Variable Speed Control Rotary Type HD (15 Amp)
$103.95
 Rotary Spring Wound Timer
Rotary Spring Wound Timer
$49.19
S&P Intake Grill with Steel Collar, 4'' or 6'' Sizes Available
S&P Intake Grill with Steel Collar, 4" or 6" Sizes Available
$17.32
S&P Aluminum Exterior Fixed Grill, 4'' - 8'' Sizes Available
S&P Aluminum Exterior Fixed Grill, 4" - 8" Sizes Available
$16.26
 SCR-210 Variable Speed Control Rotary Type HD (10 Amp/230V)
SCR-210 Variable Speed Control Rotary Type HD (10 Amp/230V)
$86.43
Features:
Description:
Prevent air leakage in your inline fan setup with a backdraft damper by S&P. These backdraft dampers are made out of steel and are designed for vertical or horizontal mounting. Made of galvanized steel, the backdraft dampers have lightweight aluminum damper blades and are spring-loaded for positive closure. The backdraft dampers are easy to install and are an important part of installing a duct fan setup. These dampers install inside the circular ducting to prevent a backdraft of air when the fans are switched off. The backdraft shutters are available to fit 4",5",6",8",10",12-2/5", 14" and 16" ducting. These inline backdraft dampers ship via UPS.
Additional Information:
Ship Method:

Product Reviews:
Well Made - Work Great
by: Patridk     from: LIttle Rock, AR      on: June 22, 2015
 I have one of these on each of my remote vents, and they really do the job of keeping backdraft out of the house. I originally had only the backdraft that was built into the unit, but it still let air flow back. These spring loaded dampers with the foam seal they sit on do an excellent job of stopping the unwanted air completely, while allowing the exhaust air to freely flow out when on. Love them.


super high quality, very cool.
by: Erik Price   ✔Verified Buyer      from: Orange, CA      on: January 4, 2011
 I have not installed it yet, but am very impressed with the high quality. It will work out perfectly for my application.


super high quality, very cool.
by: Erik Price   ✔Verified Buyer      from: Orange, CA      on: January 4, 2011
 I have not installed it yet, but am very impressed with the high quality. It will work out perfectly for my application.


Solidly built, but damper doors don't seal completely
by: A. Butler   ✔Verified Buyer      from: Ann Arbor, MI      on: November 9, 2010
 Bought one of these a couple weeks ago to install with a TD-100x venting a bathroom through my roof. The body is a solid chunk of metal with nice epoxy/enamel coating. The rubber surfaces around openings are nice, and give a snug fit onto the outlet port of the fan unit. The damper doors operate freely, opening about 2/3 of the way when the fan is running, and quickly returning to the closed position against a heavy rubber o-ring when it is switched off. There is a very small spring mounted on the hinge shaft that does this, which means it can be mounted in any position (not true for some other designs). My primary complaint is that the hinge shaft seems to be placed a few mm too far from the sealing o-ring, so that the closed position has the damper doors flexing several degrees beyond flat. This results in there being a gap of 1/8" or so around portions of circumference. While I understand this small gap will not allow major drafts to blow backwards through the system, it seems to be that a nearly perfect seal would have been possible if the hinge shaft holes were more precisely positioned nearer the sealing surface of the o-ring. The o-ring resides in an indentation, which is a good idea since it won't creep over time, but it also prevents me from adjusting its position. Out of curiosity, I purchased locally a cheap backflow damper of a different design (a single plastic door that flaps open/closed under its own weight), and found that it too didn't seal completely along the closing surface. Is this poor engineering, or an intentional feature to allow for buildup of dust or other crud over time? In the end, I am content with this item being of a high build quality, even if it doesn't seem to seal perfectly.


Your questions that we answered:
Will this work in wood furnace duct?   - Asked about product SL-CAR250
 The maximum temperature that this part can have pass through it is 140 degrees Fahrenheit / 60 degrees Celsius. The return spring built into the damper will weaken at temperatures over these numbers.
 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)

What is the height of this damper, is it spring loaded and what is the seal material   - Asked about product SL-MCA-250
 The Diameter of the MCA-250 damper is 10-3/8inches however, the Length of the duct is 6-3/16inches. Additional, dimensions for the MCS Back Draft Damper will be added to the page.

Yes, the damper is spring-loaded for positive closure.

The shutter is also made of epoxy coated steel. The MCA damper is typically used when connecting two fans together and that if you are using one fan, the CAR damper (further down the page) would be recommended over it.
 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)


An Aoife Company LLC Store
500 Bic Drive, Suite 103, Milford, CT 06461
Tel: (203) 374-5425    Fax: (203) 373-0810
email: support@kitchensource.com