Imperial C2000 12" Depth Ventilator Power Pack

For Use in Your Own Hood

Features:

For cooktops up to 50k
Air Ring fan motor, 430 CFM, 7.6 Sones
Mount Type: Built-In
Variable controls for both Power and Lights
Rear Center Panel Lighting: 38 Watt Halogen Included (can use up to 50W Halogen); or 7W LED light (LED bulb not included)
Full bottom coverage Aluminum Mesh Filters
Built-in back draft damper
Ducting Options: Vertical Ducting
Finish: 18-22 Gauge, 304 Brushed Stainless Steel
Factory 7 year parts and labor in-home warranty. Maximum efficiency not guaranteed with use over a Bar-b-que Grill due to the high output of smoke.
115v, 60 Hz, 9 amps, Suggested use with a 15 amp circuit
All ventilators come with liner
Custom: Custom sizes available. Call with exact dimensions for pricing. Delivery for custom items is 4-6 weeks
* Requires 7" Round Duct - Not Included
* Can be transitioned to 8" round with optional 7" to 8" duct increaser
* Bottom of hood should be 30-36" above cooktop
Optional Features:
Remote Switching: Wired for remote mount switching
Increase duct size with 8" transition to increase airflow and CFM
Made in the USA
Optional 3/4" stainless steel flange adds 3/4" to all sides to fill in gaps (not included) View Image
Protect your wall and hang kitchen essentials with Backsplash Accessories
Ducting Accessories for your range hood

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

Description:

Imperial powered liners are perfect for custom applications and wood canopies. These ventilator power packs come complete with motors, lights, back draft damper and controls and offer a full coverage design to provide maximum capture of steam and smoke.

Additional Information:

Click Here For Installation Instructions (PDF - 278 KB)

Ship Method:

View items

IM-C2024SD4-12
IM-C2030SD4-12
IM-C2036SD4-12

Ship via UPS/FedEx Ground

FREE Shipping via Truck to your curb. Looking for Offload Service or Inside Delivery? Click here to see more shipping options....

View items

IM-C2042SD4-12-SS

Ship via Truck

Optional Accessories:

Optional Make-Up Air Kit, In-Line Blower & Silencer:

Imperial Make-Up Air Kit

**Provides cleaner & healthier air by utilizing HVAC filtration system during operation of the residential make-up air kit.

May we also suggest...

View Similar Items....

Your questions that we answered:

	I see two dials on the picture. Is one for lights and the other for the blower? How is it designed to mount? I'm not sure what "Built-in" mount type means on your listing. Where do I need to bring the power in, left right or center? Thanks - Asked about product IM-C2042SD4-12-SS
		One knob is for the fan and one is for the lights. Please view the drawing on the hood for the wiring location which is the 7/8" Hole which is off center on the top of the hood: Click here . Built in means it would be built into your own custom hood. There is no outer shell to hang it under a cabinet.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	I have an older Kraftmaid wooden wall mounted range hood (8 years). It's a simple style. The motor is not strong enough and I would like to replace it. It is currently vented to the outside via the roof. I think the Imperial 2C2024SD4-12 might work, but am not sure. I could sent a pic if you reply to me. There is a separate liner inside the hood that has a inset section at the front from it being totally rectangular when you look underneath. I might have to keep that. The guts of the unit looks like it's 23 1/2 x 10 1/2, but i haven't taken it out to be more accurate. Do you have any experience with my type of hood and replacing the insert? - Asked about product IM-C2024SD4-12
		The liner that will fit into the kraftmaid hood would be determined by the opening in the bottom of the imperial hood. If the opening is a rectangular opening and will fit the Imperial power pack dimensions of: 22-3/8" W x 11-1/4" D x 6" H then, it should work. However, you will need to remove the liner you have. The imperial IM-C2024SD4-12 is a linerless model. When the Kraftmaid liner is removed, what is the opening size? That will determine if it will fit , if the opening is larger then, it should work.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)