1.800.667.8721 or Live Chat (9AM - 6PM EST)
Imperial Step Slope Under Cabinet Mount Range Hood with Slim Baffle Filters, 325 - 660 CFM, 7" Duct
S/S
White
Shown with Mesh Filters
Shown with Mesh Filters
Black
Baffle Filters
Shop for similar items:
Features:
- For cooktops up to 73K
- Powerful quiet 325 - 660 CFM turbo blowers
- Full coverage Slim Baffle Filters
- 1.5 to 4.9 sones
- Mount type: Cabinet Mount
- 18-22 gauge 304 marine grade stainless steel
- Heat Sensor: Fire Safety Thermostat with Automatic turn ON when temp. reaches 130 degrees. Not available on SD2 or T model
- Variable Switches give full control of both Power and Lights; SD2 model has rocker controls
- Lighting: Center Panel Lighting: 6.5 Watt LED Included
- N1900T model: Blower is offset to the right and the duct is in the center. Majority of the airflow is on the right side of the hood since the blower is off-set to the right
- Remote Switching Available: Wired for remote mount switching for ADA Compliance (not included)
- Built-in Back Draft Damper
- Finish: Choose 304 Stainless Steel or White or Black Powder Coat Finish
- Custom sizes available, call with dimensions to confirm that we can meet your needs
- Ducting: 7" round Vertical ducting
- Bottom of hood should be 30"-36" above cooktop
- Factory 7 year parts and labor in-home warranty. Maximum efficiency not guaranteed with use over a Bar-b-que Grill due to the high output of smoke
- 120v, 5-9 amp, 60 Hz
- Custom finishes available: powder coated finishes in choice of 60 colors and textures, Please call for pricing. Color Chart
- Protect your wall and hang kitchen essentials with Backsplash Accessories
- Ducting Accessories for your range hood
Made in the USA| Models | Blowers | CFM | Sones | Lighting | Controls | Ducting | Size | N1900SD2 | Air Ring Fan | 325 | 2.5 to 4.9 | Single center panel | Rocker (off-low-hi) | 7" Rnd | 30", 36", 42", 48" |
| N1900T | Turbo Blower | 385 | 2.5 to 4.9 | Single center panel | Variable | 7" Rnd | 30", 36", 42" |
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
30", 36", 42" or 48" Widths x 18"D x 6"H
* Requires 7" Round single Ducting - Not Included
* Bottom of hood should be 36" above cooktop
30", 36", 42" or 48" Widths x 18"D x 6"H
* Requires 7" Round single Ducting - Not Included
* Bottom of hood should be 36" above cooktop
Description:
This Imperial Step Slope Under Cabinet Mount Range Hood with Slim Baffle Filters and 7" Duct features a fire safety thermostat with automatic turn ON when temperature reaches 130 degrees. The hood features a standard finish in stainless steel, or a powder coat finish in white or black, and includes dishwasher-safe stainless steel baffle filters.
Additional Information:
 | Installation Instructions (PDF) |
Ship Method:
Optional Make-Up Air Kit, In-Line Blower & Silencer:
**Provides cleaner & healthier air by utilizing HVAC filtration system during operation of the residential make-up air kit.
Your questions that we answered:
 | 1. How much space is required from bottom or hood to cooktop (gas)? I have 30" from cooktop to bottom of 6" (slim) hood. Product detail lists both 30 - 36" minimum AND 36" minimum. 2. What is the difference (advantage) between single and dual blowers? 3. With a 57K BTU gas stove, will a higher rated CFM cause much backdraft? - Asked about product IM-N1930BP1SB-SS | |
 | We recommend between 30-36" of space between the cooktop and the hood so 30" is fine. There is no advantage of a dual blower over a single blower, just the CFM being higher. The reason for dual is the blowers provide more CFM, however, they are housed in two smaller blower casings to keep it quiet. 57k BTU requires about 600 CFM. There would be no backdraft as long as a damper is installed. A higher rated CFM would not harm anything. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
An Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
