![]() | Assembly and Mounting Instructions |
![]() | Helpful Hints Selecting Right Pot Rack (PDF) |
![]() | HIGH QUALITY EXCELLENCE!! by: N L Byrd ✔Verified Buyer from: Houston, TX on: May 25, 2022 |
I am extremely pleased with the high quality of the pot rack! It's exactly what I wanted, VERY sturdy and at the same time attractive as it hangs in my kitchen! Once deciding exactly where I wanted to hang it, installation was PDQ! Less than half an hour from start to finish, the most time consuming was verifying the location of the ceiling joists. If you're looking for high quality at a very reasonable price, look no further! |
|
![]() | Fantastic! by: Catherine Mantegani ✔Verified Buyer from: Tontitown, AR on: August 5, 2021 |
Replaced a homemade pot rack with this spiffy new one. Perfect for my collection of pots and pans and looks great. I LOVE the convenience grabbing a pot without having to bend down and move stuff around to get the pot I need.
I live in a 100 year old house where storage is at a premium so the pot rack is a space saver. |
|
![]() | GREAT! by: MMS ✔Verified Buyer from: New York, NY on: February 3, 2020 |
This the third enclume pot rack I've owned over twenty years and three different homes/kitchens. It's absolutely perfect. Visually disappears to blend it with whatever decorating scheme you've got, holds as many pots as you want, very strong, easy for a carpenter (or hany homeowner) to install. If I move again, I'm sure I'll get another one. |
|
![]() | Great product by: Peggy ✔Verified Buyer from: Huntsville, AL on: January 27, 2017 |
This is a solid and easy to install pot rack. Takes up very little space to store many pots. The rack stays balanced when a pan is removed, so it always looks good. |
|
![]() | Great product by: Michelle ✔Verified Buyer from: Scottsdale, Az on: January 22, 2016 |
We needed a simple way to hang our pots in an open concept kitchen/family room/dining room area. We didn't want to have the pot rack be the focal point and this design works perfectly. I have 11 items hanging from it and it works great!! It also goes well since we have stainless steel appliances |
|
![]() | Excellent by: Claude Bouvier ✔Verified Buyer from: Palm Beach, Fl on: December 16, 2015 |
The pot rack is exactly as described, sturdy and well made. |
|
![]() | ... by: anonymous ✔Verified Buyer from: -, - on: May 6, 2014 |
![]() | Perfect for my pans! by: Mgodfrey ✔Verified Buyer from: Parker, CO on: January 24, 2014 |
I love this pot holder!! Its not big and it fits nicely in my window. You could put it against a wall or over a island because its not big like the oval or square one so it doesn't make your kitchen look smaller. I have 12 pans with their lids hooked on it. It was very easy to install. |
|
![]() | Great! by: Joyce Castleberry ✔Verified Buyer from: New York, NY on: December 24, 2013 |
Substantial with a big plus because the details show great care in manufacturing and intelligent use of material. All good! |
|
![]() | very heavy duty and looks better than pictures by: michael mcferon ✔Verified Buyer from: Elbert, CO on: September 11, 2013 |
http://www.kitchensource.com/attributes/images/star-over.gif |
|
![]() | ... by: Mark ✔Verified Buyer from: -, - on: March 21, 2013 |
The rack is very nice. However, the hardware provided to attach to the ceiling was less than desirable. I ended up going to the hardware store and purchased a couple of large washers to give it a more polished look at the ceiling. |
|
![]() | Just Perfect by: L Plummer ✔Verified Buyer from: Westborough, MA on: February 18, 2011 |
Have always had a pot rack but when we moved to a condo we felt the space was to small to accomodate one. We were so pleased when we found the Enclume
Hammered Steel Ceiling Bar Pot Rack 36" Installation instruction were easy, holds 7 pans and it looks Just Perfect. Thanks |
|
![]() | Built like a tank and looks great by: Chad ✔Verified Buyer from: Santa Clarita, CA on: January 4, 2011 |
Very satisfied with the pot rack. The included install kit gave me several mounting options (even included some interesting/stout drywall anchors in case I wanted to mount it directly to the gypsum board. Overall it looks great, is built like a tank (the 48" weighs in at around 25 pounds I'm guessing) and I'm sure that it'll be a lasting feature of our kitchen. Another example of the old truism "you get what you pay for." |
|
![]() | Great Product. Needs a few minor tweeks by: Larry ✔Verified Buyer from: Citrus Heights, CA on: January 4, 2010 |
Great wall rack. I purchased the single bar and it is great for a limited space above the sink. Both wood hooks and machine hooks were included for installation into wood studs or into the ceiling. The hooks did not look alike and became a problem because one side reached a stud but the other side did not. I wish both types of hooks looked alike so they would match. I ended up making a wood plate so that both matching wood screws could be used.
|
|
![]() | How much weight will this model hold? 10 All Clad pans - Asked about product EN-PR18-60SS | |
![]() | EN-PR18-60SS has not been weight rated, and it is suggested to install the pot rack directly into your ceiling beam for the most sturdy installation. |
|
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
![]() | The product states 20 inches in height. Is that from the ceiling to the bottom of the hooks hanging off the steel bar? - Asked about product EN-PR18-36SS | |
![]() | For item EN-PR18-36SS, the height of 20" includes the ceiling screw hooks and Hanging hooks. |
|
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
![]() | Please tell me what the measurement of the holes are from the ends. - Asked about product EN-PR18-48SS | |
![]() | The holes are approximately 12" from the ends of the bar and drilled at 24" apart. |
|
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
![]() | Is the material stainless steel throughout and not a stainless steel finish only? Are the hooks solid stainless steel? - Asked about product EN-PR18-36SS | |
![]() | Yes the Enclume pot rack is constructed from stainless steel material. |
|
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
![]() | What is the distance between the two holes drilled to accommodate ceiling hooks in the 60" pot holder? We assume the ceiling joists in our kitchen are the U.S. standard 16" between centers, so we want to be assured we will be able to get each of the 20" rigid rods into wood. - Asked about product EN-PR18-60HS | |
![]() | This rack mounts on 32" centers. Although I’m not for sure where they are getting the 20" from as the Offset hooks are 14" in height, the CSH’s are approximately 5", with a 1-1/2" thread; and the bar itself is 2" plus the pot hooks that hang off the rack are 2-1/2". |
|
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
![]() | I am going to hang this from a sloped ceiking. Would this work with 2 small extension hook and chain, instead fo the offset hooks? Just not sure if the extension hooks would fit in the mounting holes. Thanks - Asked about product EN-PR18-60HS | |
![]() | The Extension hooks and chain will fit, but the Extension hooks are square stock and will not match the offset hooks which are cylinder in shape. |
|
100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
![]() | How many hooks and of what shape and color does the bar rack ship with. - Asked about product EN-PR18-48HS | |
![]() | The 48” pot rack comes with (12) EN-PHA Angled Pot Hooks that are 4.5 inches H and the hook end is at a right angle. The hooks come in the pot rack finish selected so, in this case, Hammered Steel. To get a better look at EN-PHA Pot Hook, see our Enclume Hooks & Chains Page: Click here |
|
50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||