1.800.667.8721 or Live Chat (9AM - 6PM EST)

Home >> Cabinet >> Lazy Susans >> Rev A Shelf Lazy Susans

Top

Rev-A-Shelf Half-Moon Lazy Susan Hardware Kits For Custom Lazy Susan Shelves

View all from Rev A Shelf

(2)

Single Rev-A-Tray Tray Hardware Kit

2 Shelf Hardware Kit without Slides

Extension Slide Kit

2 Shelf Hardware Kit with Slides
Shelf Not Included

2 Shelf Hardware Kit with Slides

Lifetime Guarantee

$49.47 - $188.89

Get $25 Store Gift Card on orders over $500
sale

Get $50 Store Gift Card on orders over $1000

Model:

Choose a product below

Shipping:

Free S/H on Rev A Shelf orders over $99!

Check Shipping Times

-- Select a Hardware Kit --

Qty?

Features:

Hardware kits and slides for customer supplied half-moon shelves
Made of metal

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

(Frameless Minimum Cabinet Opening: Watch for Position of Hinge Block & Allow for its Depth if Necessary)
Click to View Frame Face vs. Frameless Cabinets

Description:

If you are looking for a Hardware Kit for your custom half-moon Lazy Susan shelves, these Rev-A-Shelf Hardware Component Kits are perfect! These hardware components are for use with Custom Half-Moon Lazy Susan Shelves. The kits are available for a single shelf lazy susan or for a 2-shelf lazy susan set, and include the option of extension slides. Perfect for those custom built kitchens and custom cabinets.

Additional Information:

Installation Instructions (PDF)

How to Measure Base Cabinets for Choosing Correct Lazy Susan (PDF)

How to Measure Base or Lower Cabinets for Frameless or Face Frame (PDF)

Care and Maintenance (PDF)

Ship Method:

Ships via UPS/FedEx Ground

May we also suggest...

Product Reviews:

	I like it - A lot by: Robert Reed ✔Verified Buyer from: Clarksville, IN on: May 13, 2020
	I purchased the Rev A Tray hardware kit without shelves. I am making my own kitchen cabinets and wanted extra large shelves that I made. The hardware kit has performed excellently. I also ordered longer glides from another source that I had to customize to get them to fit. I am very pleased with my Rev A Tray purchase. Thank You

	Good Experience by: Robert Reed ✔Verified Buyer from: Clarksville, IN on: April 6, 2020
	I wanted longer glides because I am making larger than normal 1/2 moon shelves (42 by 19 inches) so I ordered 21 inch glides from someone else. I also am placing two 14 by 1 1/2 by 1/8th inch steel pieces across the glides (at a right angle) so as to help support the 19 inch width (keep it from sagging). The rev a shelf went together quickly and easily. My customizing of the glides, not so quickly or easily, but that's on me. Thank Rev a shelf for your fine product.

Your questions that we answered:

	could you please give me the dimensions for hardware that supports the shelves? - Asked about product RAS-6882-04-52
		The slides are 10-1/2'' D and RAS-RS6882-04-52 will work on the 38" or 39" shelves as long as one of the versions above is used. Please note, the tray is not included.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	The opening width of my blind corner cabinet is 11", if I make my own shelves will the hardware kit listed above work for that opening? - Asked about product RAS-6882-04-52
		Item RAS-RS6882-04-52 is the hardware kit for the 1/2 moon susans. These will ONLY work with 6882, 4NW, and 4WLS Versions. Yes, RAS-RS6882-04-52 will work on the 38" or 39" shelves as long as one of the versions above is used.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	How long are the slides and can I use a 39x17x3/4 inch custom made shelf on them? - Asked about product RAS-6882-04-52
		The slides are 10-1/2''D and RAS-RS6882-04-52 will work on the 38" or 39" shelves as long as one of the versions above is used. Please note, the tray is not included.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	Will this work for a custom made 38/39 inch shelf? - Asked about product RAS-6882-04-52
		Item RAS-RS6882-04-52 is the hardware kit for the ½ moon susans. These will ONLY work with 6882, 4NW, and 4WLS Versions. Yes, RAS-RS6882-04-52 will work on the 38" or 39" shelves as long as one of the versions above is used.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	dimensions please for the above model. does it come with the shelves included? - Asked about product RAS-6882-04-52
		Shelves are not included with this unit; this is a hardware kit for a customers custom shelves.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)