![]() | ... by: anonymous ✔Verified Buyer from: -, - on: March 2, 2020 |
![]() | ... by: anonymous ✔Verified Buyer from: -, - on: May 11, 2017 |
![]() | What is the inside diameter of the ring; I am looking for something 1-5/16. - Asked about product HA-802.06.167 | |
![]() | The inside diameter is 1-5/16" Dia. to fit the 1-5/16" closet rod. |
|
50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||
![]() | I need something that is less than or equal to 3 inches in total height, because from ceiling to the bottom of my rod holder is 3 inches. I want diameter of 1.5 inches. Looks like this one is greater than 3 inches. Do you have any with 3 inches or less? - Asked about product HA-802.06.667 | |
![]() | The overall height is 3-5/8"H. The height of the mounting plate to the center of the holder is 2-5/8"H - here are the specifications: Click here
Unfortunately we do not carry any that are 3" or less. |
|
50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||
![]() | What is the dimension from the center of hole to the top of mounting plate Thanks. George - Asked about product HA-802.06.667 | |
![]() | The support measures 2-3/16" from the center of the hole to the top of the mounting plate. |
|
50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||
![]() | What is the size of the closet pole opening (circle) Is it 1 1/8 or 1 5/16? I do not see the specification - Asked about product HA-802.06.167 | |
![]() | This item is intended to hold the Hafele Synergy rail - Click here - the opening is 1-5/16" dia. |
|
67% of 3 people found this useful. Was this useful to you? Yes (2) | No (1) | ||
![]() | I have a 1.25" Dia (4" around)x 43.78" /- Wooden Rod which needs top support in a closet. The distance from the top of the closet to the top of the rod is 3" and to the bottom of the rod 4.25". Do you have a center support which fits that? Alternately, do you have a heavy duty metal rod which does not leach (black) residue? Rich - Asked about product HA-802.06.167 | |
![]() | This hole on this support is 1-5/16" Dia. Which is just 1/16" over your dimension so your wood rod would fit. The item is 3 5/8" H and from the base of it to the middle of the hole is 2 13/16". We do have rods 47-15/16" L that can be trimmed down which you can view at Click here - this should not leach any reside. |
|
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
![]() | Will I need more than one if my closet width is 67 inches? - Asked about product HA-802.06.267 | |
![]() | The longest wardrobe rail for the Synergy Elite is 47-15/16" wide. The center supports are not weight tested, but you would only need one if you're using the supports on each end to attach to your cabinet. |
|
50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||
![]() | Does the center post turn, thus allowing the screw holes to be perpendicular to the ring? - Asked about product HA-802.06.667 | |
![]() | No, it is welded on, so it doesn't turn. |
|
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
![]() | How much weight will this product support? - Asked about product HA-802.06.667 | |
![]() | The center support has not been tested for weight capacity but would likely be as strong as the fasteners which would hold it to the shelf. |
|
80% of 5 people found this useful. Was this useful to you? Yes (4) | No (1) | ||