1.800.667.8721 or Live Chat (9AM - 6PM EST)
John Boos Pro Bowl Platter Sink with Two Bowls, with Left or Right Drainboard, 14 or 16 Gauge Stainless Steel Top with Galvanized Steel Base
Shown with 2 Drainboards, Only Available with Left or Right Drainboard
Shop for similar items:
Features:
- Pro Bowl Platter Sink with Two Bowls
- With Left or Right Drainboard, Available in different sizes
- 12" Deep Bowls (14" available upon request)
- 14 or 16 Gauge - Type 300 stainless steel with # 4 polish, satin finish
- All Corners, both vertical and horizontal, coved at 5/8" radius to meet NSF Standards
- Bottoms of bowls formed for drainage to 3-1/2" diameter die stamped opening
- Full length 10" High Boxed Backsplash, with 2" return to wall at 45 degree and 3/4" turned down rear lip
- 1-1/2" Faucet Holes in Backsplash - 8" On-Center Spread (8" between centers of the two ouside holes)
- Solid Stainless Steel front panel, type 300 stainless steel with # 4 polish, satin finish
- All outside corners of assembly are Bullnosed to provide safe,clean and polished edge
- Standard legs 1-5/8" diameter
- Legs located directly under sink bowls, providing increased stability and maximum weight support
- Legs attach to sink with sanitary NSF Listed gussets, each with 2 set screws to assure no interference with plumbing
- 1" adjustable galvanized steel bullet feet
- Optional dishtables available to attach on sides of sink (See Optional Accessories)
- Optional Pro Bowl Faucets available (See Optional Accessories)
- Ships unassembled
- CONSTRUCTION:
- Top: Stainless Steel Sinks are TIG welded, Exposed welds are polished to match adjacent surface.
- Bases:Galvanized Bases are MIG welded, 100% pre-galvanized steel (not plated)
- NSF Certified (National Sanitation Foundation): All John Boos Pro Bowl Sinks are built to comply with NSF STD. 2 requirements. The NSF is an accredited, third-party certification organization that tests and certifies products to verify they meet public health and safety standards.
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
| Model | Gauge | Bowl Sizes | Dimensions | Drainboard | Backsplash | Height | Weight |
|---|---|---|---|---|---|---|---|
| 2PBPS1431-1D18 | 16 Gauge | (2) 14"W x 31"D x 12"H | 50-3/16"W x 36-1/2"D | 18" | 10"H | 43"H | 245 |
| 2PBPS1431-1D24 | 16 Gauge | (2) 14"W x 31"D x 12"H | 56-3/16"W x 36-1/2"D | 24" | 10"H | 43"H | 250 |
| 2PBPS1431-1D30 | 16 Gauge | (2) 14"W x 31"D x 12"H | 62-3/16"W x 36-1/2"D | 30" | 10"H | 43"H | 260 |
| 42PBPS1431-1D18 | 14 Gauge | (2) 14"W x 31"D x 12"H | 50-3/16"W x 36-1/2"D | 18" | 10"H | 43"H | 270 |
| 42PBPS1431-1D24 | 14 Gauge | (2) 14"W x 31"D x 12"H | 56-3/16"W x 36-1/2"D | 24" | 10"H | 43"H | 275 |
| 42PBPS1431-1D30 | 14 Gauge | (2) 14"W x 31"D x 12"H | 62-3/16"W x 36-1/2"D | 30" | 10"H | 43"H | 286 |
Description:
This John Boos Pro Bowl Platter Sink with Two Bowls comes with a left or right drainboard, which is available in different sizes. The NSF professional kitchen sinks come in 14 or 16 gauge type 300 stainless steel with a # 4 polish, satin finish. All corners of the stainless steel sink, both vertical and horizontal, are coved at a 5/8" radius to meet NSF Standards. The full length 10" high boxed backsplash, with a 2" return to wall at 45 degree and 3/4" turned down rear lip, has 1-1/2" faucet holes.
Optional Accessories:
**Available for Left or Right Side
**Stainless Steel or Galvanized Steel Legs & Stainless Steel Top
**Stainless Steel or Galvanized Steel Legs & Stainless Steel Top
**Available for Left or Right Side
**Stainless Steel or Galvanized Steel Legs & Stainless Steel Top
**Stainless Steel or Galvanized Steel Legs & Stainless Steel Top
**Faucet spout should usually come out at least half the depth of the kitchen sink bowl
An Aoife Company LLC Store
500 Bic Drive, Suite 103, Milford, CT 06461
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
