1.800.667.8721 or Live Chat (9AM - 6PM EST)
John Boos Pro Bowl NSF Sink with Two Bowls, without Drainboard, 14 or 16 Gauge Stainless Steel
Shop for similar items:
Features:
- Pro Bowl NSF Sink with Two Bowls
- Without Drainboard
- 12" or 14" Deep Bowls
- 14 or 16 Gauge - Type 300 stainless steel with # 4 polish, satin finish
- All Corners, both vertical and horizontal, coved at 5/8" radius to meet NSF Standards
- Bottoms of bowls formed for drainage to 3-1/2" diameter die stamped opening
- Full length 10" High Boxed Backsplash, with 2" return to wall at 45 degree and 3/4" turned down rear lip
- 1-1/8" Faucet Holes in Backsplash - 8" On-Center Spread (8" between centers of the two outside holes)
- Solid Stainless Steel front panel, type 300 stainless steel with # 4 polish, satin finish
- All outside corners of assembly are Bullnosed to provide safe,clean and polished edge
- Standard legs 1-5/8" diameter
- Legs located directly under sink bowls, providing increased stability and maximum weight support
- Legs attach to sink with sanitary NSF Listed gussets, each with 2 set screws to assure no interference with plumbing
- 1" adjustable stainless steel bullet feet
- Optional dishtables available to attach on sides of sink (See Optional Accessories)
- Optional Pro Bowl Faucets available (See Optional Accessories)
- Ships unassembled
- CONSTRUCTION:
- Top: Stainless Steel Sinks are TIG welded, Exposed welds are polished to match adjacent surface.
- Bases:Stainless Steel Bases, Standard K.D. (Knockdown Easy-To-Assemble)
- NSF Certified (National Sanitation Foundation): All John Boos Pro Bowl Sinks are built to comply with NSF STD. 2 requirements. The NSF is an accredited, third-party certification organization that tests and certifies products to verify they meet public health and safety standards.
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
Note: Dimensions and Weight Shown for 16-Gauge Items and 14-Gauge Items have Same Dimensions, but Heavier in Weight
All Dimensions are Typical, Tolerance =/- .500"
Full length 10" High Boxed Backsplash
For 30" W x 30" D Sink Available Only: (2) 30" W x 30" D x 14" Bowl Depth, 14-Gauge Stainless Steel
Note: Dimensions and Weight Shown for 16-Gauge Items and 14-Gauge Items have Same Dimensions, but Heavier in Weight
All Dimensions are Typical, Tolerance =/- .500"
Full length 10" High Boxed Backsplash
For 30" W x 30" D Sink Available Only: (2) 30" W x 30" D x 14" Bowl Depth, 14-Gauge Stainless Steel
Description:
This John Boos Pro Bowl NSF Sink with Two Bowls comes without a drainboard. The NSF professional kitchen sinks come in 14 or 16 gauge type 300 stainless steel with a # 4 polish, satin finish. All corners of the stainless steel sink, both vertical and horizontal, are coved at a 5/8" radius to meet NSF Standards. The full length 10" high boxed backsplash, with a 2" return to wall at 45 degree and 3/4" turned down rear lip, has 1-1/8" faucet holes.
Optional Care Products, Dishtables and Kitchen Faucets:
8 oz. Bottle - 3 or 12 Pack
*Cleans food residue, fingerprints, and kitchen grease
*Safe for use in food handling environments
*Cleans food residue, fingerprints, and kitchen grease
*Safe for use in food handling environments
**Available for Left or Right Side
**Stainless Steel or Galvanized Steel Legs & Stainless Steel Top
**Stainless Steel or Galvanized Steel Legs & Stainless Steel Top
**Available for Left or Right Side
**Stainless Steel or Galvanized Steel Legs & Stainless Steel Top
**Stainless Steel or Galvanized Steel Legs & Stainless Steel Top
**Faucet spout should usually come out at least half the depth of the kitchen sink bowl
An Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
