1.800.667.8721 or Live Chat (9AM - 6PM EST)
John Boos High-Density Polyethylene 1000 Replacement Poly Table Tops, 24" - 120"W, 12"D - 48"D
Shop for similar items:
Features:
- Poly 1000 Replacement Poly Table Tops
- High-Density Polyethylene material
- Reversible & Removable
- Light Weight, Odorless, Tasteless
- Non-Absobent & Non-Staining
- Non-skid cutting surface
- Textured glass-molded
- Comfortable bevel edge
- Pure white
- Easily sanitized by high temp dishwasher
- Approved by the NSF, USDA, FDA & GSA
- Outlasts imported boards 4 to 1
- Available 24", 25", 36", 48", 60", 72", 84", 96", 108" or 120" wide
- Boards 48"+ come in sections
- 36" long = 1 section
- 48" long = 2 sections
- 60" - 72" long = 3 sections
- 84" - 120" long = 4 sections
- 12", 18", 20", 24", 25", 30", 36" or 48" Depths
- 1/2", 3/4" or 1" thick
- NSF approved for food preparation
Made in the USA
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
24", 25", 36", 48", 60", 72", 84", 96", 108" or 120" Widths
12", 18", 20", 24", 25", 30", 36" or 48" Depths
1/2", 3/4" or 1" thick
24", 25", 36", 48", 60", 72", 84", 96", 108" or 120" Widths
12", 18", 20", 24", 25", 30", 36" or 48" Depths
1/2", 3/4" or 1" thick
Description:
These John Boos High-Density Polyethylene 1000 Replacement Poly Table Tops are available in multiple widths and depths. The tops are NSF approved for food preparation and are made in America.
Ship Method:
Your questions that we answered:
 | Does this item come in one piece? - Asked about product JB-P1024 | |
 | Due to the size of JB-P1024, the High-Density Polyethylene 1000 Replacement Poly Table Tops would be a 3 section pieces. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Is it possible to have a picture or template made into this product? Using it to make pretzels, looking for a template made into the counter to make consistently sized pretzels easily. - Asked about product JB-P1074 | |
| Unfortunately it is not possible to be made with a shape / image embedded into the top. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| How do you cut this material to get a smooth edge? I am trying to replace an RV countertop with a sink and faucet, so will need to customize the size and shape. Thanks. - Asked about product JB-P1015 | |
| You would want to use the proper tools, such as a skill saw or table saw, and you can lightly sand the edges. |
|
| 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
| Can you get a cut out on these tops? I'd like to use it for a fish cleaning bench and have a cut out for a small sink. If so I'd also like to have the cut out to put over the sink when not in use. - Asked about product JB-P1025 | |
| As long as you have the proper tools, like a skill saw, then you can cut it and it should be relatively easy. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
An Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
