| Could this material be used (after ripped in half) to mounted as a counter backsplash? - Asked about product JB-L048-O |
| | John Boos actually sells backsplashes: JB-RS121-O would work for the steam table. Click here
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| We already have a John Booz table with maple top (84x30).
We want to make it so there is a overhang on the table. Could we attach this item to the edge of the table using wood glue and a metal joining plate to give it a 8 inch overhang? - Asked about product JB-L004-O |
| | Per John Boos, they do not recommend using wood glue. They suggest you get a support bracket and attach it that way. Attached is an instruction guide to help you with the process. Click here
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| I am undecided about the JB-L058-O and JB-L016-O. Will these be stamped with the BOOS logo in the corners of the board on the sides, both front and back - Asked about product JB-L058-O |
| | The John Boos logo is typically only stamped on 1 side. You can choose if you would like the logo centered or off to a certain side. Please leave a note in the Special Instructions box at checkout as to where you would like the logo, or give us a call to order at 1.800.667.8721.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Could these boards be placed together on a 60x60 island to create a butcher block top? the tops that are premade don't come that deep. thanks - Asked about product JB-L044-O |
| | The vendor would not recommend putting these tops together to create a butcher block top. John Boos can manufacture a custom top that is 60x60 with a minimum depth of 1-3/4". They would need to know if it was for commercial or residential, and if it’s for residential, they would need to know the species of wood needed and the finish. Please call us at 1.800.667.8721 to get a quote for your product once you have figured out what kind of top you need.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Will this cutting board hold up to the heat from the steam table? Appr. 120-140 degrees
- Asked about product JB-L050-O |
| | These steam table boards are not to be used under the heat lamps. They are for food prep so the wood will not tolerate that kind of heat and humidity.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|