Physical Specifications | Cabinet Opening |
Part # | Width (Min to Max) |
Depth (Min to Max) |
Height (Min to Max) |
Weight (lbs) |
Color/ Finish |
Width (Min to Max) |
Depth (Min to Max) |
Height (Min to Max) |
CIB-16CR | 14-1/4 to 21 | 15-14/16 | 4 | 17 | Chrome/Wire | 14-1/4 | 16 | 3-10/16 |
VIB-20CR | 14-1/4 to 21 | 19-13/16 | 4 | 19 | Chrome/Wire | 14-1/4 | 20 | 3-10/16 |
Installation Instructions |
![]() | ... by: Spayan ✔Verified Buyer from: San luis, AZ on: July 6, 2017 |
Excelent product, arrived on time, a little bit heavier than I expected |
|
![]() | very convenient by: Lee B ✔Verified Buyer from: Orchard Park, NY on: November 27, 2012 |
We just completed a 2nd floor laundry in a small room and needed a convenient, easy to use ironing board. The fold out ironing board was a great solution. It was fairly easy to install - was done in a few hours in a weekend morning to convert the cabinet drawer into the pull out ironing board. It doesn't seem to be a sturdy as a full sized stand alone board, but is great for the touch ups and small items we use it for. |
|
![]() | ... by: dennis ✔Verified Buyer from: novato, ca on: September 10, 2009 |
relatively simple to install. works great.my wife is very happy |
|
![]() | LIKE IT by: JAN ✔Verified Buyer from: SAN ANTONIO, TX on: August 28, 2009 |
IT IS A LITTLE DIFFICULT TO INSTALL. MAKE SURE AND READ THE DIRECTIONS FIRST. WORKS LIKE A CHAMP |
|
![]() | THE DRAW I WANT THIS FOR IS 22"wide will the 21" work - Asked about product RAS-VIB-20CR | |
![]() | The width is adjustable on the brackets. It can adjust up to 21" W. If the inside walls of your cabinet are at 22", you would need wood spacers to mount the slides to. |
|
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
![]() | I wanted to install this INTO a drawer. Is this possible? If so, what height should the drawer unit be to allow enough space for storage. Can the side rails be attached to the floor of the drawer? - Asked about product RAS-VIB-20CR | |
![]() | This item can not install inside of a drawer, instead it becomes the drawer itself with the drawer front mounted to it. |
|
50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||
![]() | Hi, U state that the board is expandable to 21", but I don't see it in any of your photos. I recvd one with my laundry rm via the kitchen company but it's a narrow little thing, not very conducive to ironing bigger items. Kindly clarify...I am very much looking for something wider than what I have. Thanks! - Asked about product RAS-VIB-20CR | |
![]() | It is harder to see in the pictures, but item RAS-VIB-20CR does extend out 21" from the drawer. The full dimensions of unit RAS-VIB-20CR are as follows:
VIB-20CR (Closed): 14-1/4" - 21" W x 20" D x 4" H VIB-20CR (Open): 12" W x 37-7/10" L The dimensions shows some better images of the specs: Click here |
|
50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||
![]() | Can this be installed in the approximately 18 inch wide by 22 inch depth IKEA PAX drawer cabinet? - Asked about product RAS-VIB-20CR | |
![]() | Yes, this will fit. The cabinet opening requirements for RAS-VIB-20CR are 14-1/2’’W x 20’’D x 3-10/16’’H |
|
75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1) | ||
![]() | Hi, I am wondering on the drawer width for this product. If it will fit in a drawer 14 - 21 inches does that mean it will basically only fit in a 18 inch cabinet width drawer? My cabinet drawers are a 30 inch and a 12 inch. Thank You, Leah Mendoza - Asked about product RAS-VIB-20CR | |
![]() | The minimum cabinet opening: 14-1/4" W
The minimum Height Opening: 3-10/16" H The minimum Depth: 20" D The largest cabinet/drawer width that this will adjust to is 21". |
|
67% of 3 people found this useful. Was this useful to you? Yes (2) | No (1) | ||
![]() | I have an opening where I put a basket and would like to put a fold out ironing board in. Do I need to put a drawer front on it or can I leave it w/o one since the opening is bigger than a drawer? - Asked about product RAS-VIB-20CR | |
![]() | You can, but it will be difficult to pull out. |
|
50% of 6 people found this useful. Was this useful to you? Yes (3) | No (3) | ||
![]() | Does this ironing board just mount into an existing drawer? What would the minimum drawer diminsions need to be? - Asked about product RAS-VIB-20CR | |
![]() | You take the existing drawer out of the opening, take off the drawer front, and mount the front to the front of the iron board. Depending on if you chose the 16" or the 20", the drawer minimum and maximum dimensions have been added to the page here:
Click here |
|
93% of 15 people found this useful. Was this useful to you? Yes (14) | No (1) | ||