|
| LifeStyle
Ironing Center Installation |
| |
| Wall
Mounting Instructions | User
Instructions |
- Select
a suitable position on the wall with access to a power supply
- Select
a wall/vertical face with structural integrity for fixing the
ironing board
- Allow for
weight of ironing board supported by 5 screws against wall
- Ensure
that there is enough room to rotate the ironing board when in
use
e.g.. 4-1/2" clearance radius as board swivels |
- Remove plastic cover
from wall unit. Place left hand in recess on underside of cover
and right hand on contoured front handle. With left hand pull
outwards from underside while supporting cover with front handle
|
|
| | |
| Wall
Plate Mounting | |
-
If
the structural wall is wooden Pre-drill a 5/32 hole at desired
Height off the floor in the center of the wall stud -
For
masonary walls drill a 1/4" hole in the wall at the same
height and insert wall plug |  |
-
Locate
and align the top hanger recesses on the cover (item c) with
hooks on the wall bracket to suspend cover |
|
-
Position
the plate with a 1-1/2" long screw through the center
screw hole in the wall plate. Mark the inner 4 holes for wood
or outer 4 holes for masonary -
Remove
wall plate, drill remaining marked holes and re-mounting wall
plate. |
-
Grip
top of ironing board to pull into horizontal position.
Unfold ironing board halves |
|
| Ironing
Board Mounting | |
- Align the
ironing board wall unit over the wall plate and lower into position.
- Press firmly
down in place . The self locking design will ensure constant
support and stability.
- Once in
place,
fit the lock screw (item g) into the top screw hole of the wall
plate using the supplied Allen key tool
|
 |
-
Loosen
knob on underside of main body to swivel ironing board away
from wall. |
|
-
Choose
ironing board position. Tighten knob on underside
| |
| |