Hafele Ironfix™ Built-In Drawer Mount Ironing Board

Shop for similar items:

Ironfix™ Wall Mount Ironing Board

$344.79

Rotating Vertical Mount Ironing Board, Minimum Inside Width: 13-38" W, Minimum Inside Depth: 12-3/16" D

$466.33

Features:

Uses space-saving cabinet drawer installation
Drawer front folds down, clearing the way for trousers and shirts
Epoxy-coated steel
Includes a heat-resistant fabric ironing board cover in a striped design
Kit includes installation hardware, 2 cabinet rails, 1 collapsible ironing board support system with folding ironing board and 2-part pull-out runners

Ironfix Replacement Board Cover: (See Accessories below to purchase):
Replacement cover for ironing board
Natural white cotton with grey stripes
Foam backed
Color: White & Grey

Ironfix Sleeve Board & Cover: (Not included with the ironing board - See Accessories below to purchase):
Finally, iron your sleeves with ease
Simply fold back the front part of the board and the sleeve board is ready for use

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

12" wide x 37-7/8" long
Will fit any drawer opening 14-1/4" - 19-11/16" W
Minimum depth 20"
Drawer Inside Clear Height (4 1/2")

Description:

Hafele's Ironfix Built-In Ironing Boards conserve space without skimping on quality or convenience. These folding ironing boards are installed into your cabinet drawer for easy access. When the drawer is opened, the ironing board supports automatically extend out for full reach. Ironing larger trousers or shirts is not a problem since the drawer front folds down and clears the way.The ironing board's hardware components are made of durable epoxy coated metal. The heat-resistant, fabric ironing board cover is included. Replacement board covers and sleeve boards are also available.
This ironing board uses space-saving cabinet drawer installation. The drawer front folds down, clearing the way for trousers and shirts. The finish is a durable epoxy-coated steel, and includes a heat-resistant fabric ironing board cover in a striped design. Kit includes installation hardware, 2 cabinet rails, 1 collapsible ironing board support system with folding ironing board and 2-part pull-out runners.

Additional Information:

Detail Specifications

Ship Method:

Ships via UPS/FedEx Ground

Accessories:

May we also suggest...

Product Reviews:

	Product 8 / Assembly Instructions 0 by: kathy ✔Verified Buyer from: port isabel, tx on: May 18, 2021
	I have read and used a lot of installation/assemble instructions in my lifetime and this product is a winner in the the worst of class, category and overall. My carpenter hired to do the construction of our new laundry closet spent 2x's the amount of time required to assemble this "drawer" then to demo, plumb and wire for the space for the washer =dryer stack.

	Excellent by: Steve ✔Verified Buyer from: Marietta, Ga on: February 16, 2015
	Quality good. Installation was not as difficult as prior reviews implied. Recommend

	... by: Hanson's ✔Verified Buyer from: Tuolumne, CA on: July 9, 2009
	I use this on our cutting table for the sewing market works very well. See our web site http://www.avdm.com/facadescuttingtable.html Our customers enjoy the convinance. Jolly Hanson

	Great Product by: Steve ✔Verified Buyer from: -, OR on: July 9, 2009
	My wife wanted a stow away ironing board for her birthday. After researching our local hardware store and the internet I settled on your Rev-A-Shelf drawer mounted ironing board. It was a snap to install and works flawlessly. Thanks for a great product.

	... by: Teresa McKiernan ✔Verified Buyer from: Modesto, CA on:
	Thank you for the great customer service. The item I ordered arrived and is perfect. Thank you.

Your questions that we answered:

	I will have a closet tower depth of 20" and a drawer front for a 6" drawer. Width 18". Will these work for sure? I can't fully understand the directions you shared in another question since it's in a different language. Thank you! - Asked about product HA-568.60.710
		Yes, this item will fit as long as the minimum width is 14-1/4" to 19-11/16", the depth is 20" and the drawer height is a minimum of 4-1/2".
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	I like the Hafele Ironfix built-in drawer mounted ironing system, but am interested in using it in a different position than shown, that is, positioned at right angles to what is shown so that it is parallel to the countertop. I realize that will save less space that way, but feel that it might be easier to use for me. Thanks! - Asked about product HA-568.60.710
		Unfortunately this item does not swivel and is only available as pictured.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	How deep does the drawer need to be. The wooden sides on our drawer is 3 1/2 inches with approx. another 1/2 inch clearance. - Asked about product HA-568.60.710
		Item HA-568.60.710 will fit into any drawer opening between 14-1/4"W - 19-11/16"W, however the board does require inside height of 4-1/2"H and 20"D.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	Does this drawer-mount board fit into a standard size drawer? I've measured my drawers and the deepest one is only about 7 1/2" in height. Your dimensions are 14 1/4" height..doyou need a custom made drawer for this item? - Asked about product HA-568.60.710
		This Built-In Drawer Mount Ironing Board does not require a custom made drawer. An inside clear depth of 19 11/16 is needed, and an inside clear width of 14 1/4 - 19 11/16 is needed , and about 6 inches for the height.
		100% of 2 people found this useful. Was this useful to you? Yes (2) \| No (0)

	I have an old drawer mount ironing board. The model # is HA-568.60.701. The model I would replace it with is HA-568.60.710. Is it the same? - Asked about product HA-568.60.710
		Hello Deena, We are not aware of the older model number, and it's specifications, but HA-568.60.710 has the following specifications: 12" wide x 37-7/8" long Will fit any drawer opening 14-1/4" - 19-11/16" W Minimum depth 20"
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	568 60. 710 Haefle Drawer Mounted Ironing Board. Can this be installed in an existing drawer? Whaat size drawer is needed? Thanks. - Asked about product HA-568.60.710
		This Ironing Board unit takes the place of the existing drawer box and requires an opening of 14 ¼” – 19 11/16”. Depth needs to be at least 19 11/16”.
		100% of 4 people found this useful. Was this useful to you? Yes (4) \| No (0)

	how is the drawer face mounted to the ironing board glide ?? Does the face come with board?? - Asked about product HA-568.60.710
		The drawer face is mounted by by two brackets. Installation Instructions can be found here: Click here
		57% of 7 people found this useful. Was this useful to you? Yes (4) \| No (3)