1.800.667.8721 or Live Chat (9AM - 6PM EST)
S&P STXB-UL792 Series Model STXB 18 Upblast Belt Drive Centrifugal Roof & Sidewall Exhauster, 800 to 1450 RPM, Single or Three Phase ODP Motor, Exhaust Air Up to 5589 CFM
Model STXB 18 Roof & Sidewall Exhauster
1/3, 1/2, 3/4, 1, 1-1/2 or 2 Motor HP (Horsepower) and Static Pressure Up to 3" WG (Water Gauge)
Shop for similar items:
Features:
- S&P STXB-UL792 Series Model STXB 18 Upblast Belt Drive Centrifugal Roof & Sidewall Exhauster
- 1/3, 1/2, 3/4, 1, 1-1/2 or 2 Motor HP (Horsepower), Static Pressure Up to 3" WG (Water Gauge), 800 to 1450 RPM (Speed), Exhaust Air Up to 5589 CFM
- Phase Motor Type: Single Phase ODP 115V (3/4, 1, 1-1/2 and 2 Motor 115/208-230V) or Three Phase ODP (208-230/490 Tri Voltage)
- Primarily Used for Removal of Dirty Contaminated, Grease Laden and/or High Temperature Air from Processes and Buildings
- Typical Applications Include Restaurant Hoods and Similar Kitchen Exhaust Ventilation, Fume and Smoke Removal, Laboratory Fume Hood Exhaust and Chemical Process Exhaust
Housing - Curb Cap with Integral Deep Single Piece Spun Inlet for Efficient Performance and Prevention of Leakage into Ductwork
- Lifting Lugs for Easy and Safe Placement of the Fan on the Roof
- Heavy-Gauge Aluminum Housing and Curb Cap for Strength and Rigidity
- Curb Cap is Galvanized Steel on All UL 762 Units
- Adjustable Motor Base for Proper Belt Tension and Ease of Adjustment
- Enclosed Ventilated Motor/Drive Compartment Isolates Motor and Drives from Exhaust Air
- Neoprene Isolators for Reduction of Vibration and Sound
- Quick-Release Latches on Motor Cover for Easy Access to Motor Compartment
- Water-Tight Conduit Tube for Easy Electrical Connection without Having to Wire through the Breather Tube
- NFPA - Suitable for National Fire Protection Association Installations Contact Factory for Required Accessories
Centrifugal Wheel - All Aluminum Wheel
- Backward-Inclined for Efficiency At Higher Static Pressure
- Non-Overloading for Safe Operation In Ducted Systems
- Curved Blades for Efficiency and Quiet Operation
- Dynamically Balanced for Smooth Operation
Motors - Brands Are Nationally Recognized and Locally Serviced
- Single Speed Drip-Proof Motors Are Provided on Standard Models
- Disconnect Switch Is Standard with Single Speed Open Drip-Proof and Totally Enclosed Motors
- Welded Motor Brackets Designed for Maximum Strength
Drives - Sized for Minimum 150% of Drive Horse Power
- Machined Cast Iron Adjustable Motor Pulleys
- Adjustable Base for Belt Tensioning
- Nonstatic Oil Resistant V-Belts
Bearings - 5-Year Bearing Warranty
- Heavy-Duty Ball Bearing Type
- Air Handling with Grease Fittings
- Sized for Minimum L50 Life in Excess of 200,000 Hours
AMCA Seal - Assures Accuracy of Air and Sound Performance
cULus Label - cULus 705 Listed Power Roof Ventilator Label Assures Electrical Reliability
- cUL762us Listed for Restaurant Exhaust Appliance Available for Applications Where Required
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
Overall Dimensions: 42-5/8" Diameter x 35-3/4" H
Roof Opening: 25-1/2" Diameter
Curb Outside Dimensions: 28-1/2" Diameter
Damper Outside Dimensions: 24" Diameter
Approximate Weight: 143 lbs
Overall Dimensions: 42-5/8" Diameter x 35-3/4" H
Roof Opening: 25-1/2" Diameter
Curb Outside Dimensions: 28-1/2" Diameter
Damper Outside Dimensions: 24" Diameter
Approximate Weight: 143 lbs
Description:
The S&P STXB-UL792 Series Model STXB 18 Upblast Belt Drive Centrifugal Roof & Sidewall Exhauster features 1/3, 1/2, 3/4, 1, 1-1/2 or 2 Motor HP (horsepower), static pressure up to 3" WG (water gauge), 800 to 1450 RPM (speed), and an option of Phase Motor Type: Single Phase ODP 115V (3/4, 1, 1-1/2 and 2 Motor 115/208-230V) or Three Phase ODP (208-230/490 Tri Voltage). The primarily used for removal of dirty contaminated, grease laden and/or high temperature air from processes and buildings. The typical applications include restaurant hoods and similar kitchen exhaust ventilation, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust. The non-overloading backward inclined wheel with its higher static pressure capability makes this unit suitable for either ducted or non-ducted applications. Its roof or sidewall mounting options permit location near the area to be ventilated, allowing short duct runs and more efficient operation.
Additional Information:
 | STXB Detailed Specifications (PDF) |
| STXB Typical Specifications (PDF) |
| STXB Series Installation Instructions (PDF) |
An Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
