1.800.667.8721 or Live Chat (9AM - 6PM EST)
S&P SDB Series Model SDB 12 Downblast Belt Drive Centrifugal Roof Exhauster, 1400 to 1750 RPM, Single or Three Phase ODP Motor, Exhaust Air Up to 1870 CFM
Model SDB 12 Roof Exhauster
1/2, 1/3 or 1/4 Motor HP (Horsepower) and Static Pressure Up to 1-3/4" WG (Water Gauge)
Shop for similar items:
Features:
- S&P SDB Series Model SDB 12 Downblast Belt Drive Centrifugal Roof Exhauster
- 1/2, 1/3 or 1/4 Motor HP (Horsepower), Static Pressure Up to 1-3/4" WG (Water Gauge), 1400 to 1700 RPM (Speed), Exhaust Air Up to 1870 CFM
- Phase Motor Type: Single Phase ODP (115V) or Three Phase ODP (208-230/490 Tri Voltage)
- Primarily Used for Exhaust of Relatively Clean Air from Wide Range of Commercial, Industrial and Institutional Environments such as Manufacturing and Assembly Plants, Office Buildings, Schools, Hospitals, Restaurants, Athletic Facilities and Many Others
Housing - Curb Cap Has Integral Deep Spun Inlet for Efficient Performance and Prepunched Mounting Holes for Ease of Installation
- Lifting Lugs for Easy and Safe Placement of The Fan on The Roof
- Spun Aluminum Hood and Skirt for Weather Protection and Attractive Appearance
- Heavy-Gauge Motor Support for Rigidity and Strength
- Neoprene Isolators for Reduction of Vibration and Sound
- Quick-Release Latches on Motor Cover for Easy Access to Motor Compartment
- Conduit Passage for Easy Electrical Connection from Below Roof
- Aluminum Birdscreen Standard
- Stainless Steel Fasteners on Exterior
Centrifugal Wheel - All Aluminum Wheel
- Backward-Inclined for Efficiency at Higher Static Pressure
- Non-Overloading for Safe Operation in Ducted Systems
- Curved Blades for Efficiency and Quiet Operation
- Dynamically Balanced for Smooth Operation
Motors - 1-Year Warranty
- Brands are Nationally Recognized and Locally Serviced
- Single Speed Open Drip-Proof are Standard
- Explosion-Proof, Totally Enclosed and Two-Speed Motors are Available
- All Motors are Rated for Continuous Duty
- 182T and Larger Motors Shipped Unmounted for Field Installation
- Disconnect Switch Standard on Single Speed Drip-Proof and Totally Enclosed Motors
Drives - Sized for Minimum 150% of Drive Horsepower
- Machined Cast Iron Adjustable Motor Pulleys
- Adjustable Base for Belt Tensioning
- Non-Static Oil Resistant V-Belts
Bearings - 5-Year Bearing Warranty
- Heavy-Duty Ball Bearing Type
- Air Handling with Grease Fittings
- Sized for A Minimum L50 Life In Excess of 200,000 Hours
AMCA Seal - Assures Accuracy of Air and Sound Performance
cULus Label - cULus 705 Listing Assures Electrical Safety and Reliability
- cULus 705 Must Be Specified When Required
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
Overall Dimensions: 27-5/8" Diameter x 31-11/16" H
Roof Opening: 15-1/2" Diameter
Curb Outside Dimensions: 18-1/2" Diameter
Damper Outside Dimensions: 14" Diameter
Approximate Weight: 73 lbs
Overall Dimensions: 27-5/8" Diameter x 31-11/16" H
Roof Opening: 15-1/2" Diameter
Curb Outside Dimensions: 18-1/2" Diameter
Damper Outside Dimensions: 14" Diameter
Approximate Weight: 73 lbs
Description:
The S&P SDB Series Model SDB 12 Downblast Belt Drive Centrifugal Roof Exhauster features 1/2, 1/3 or 1/4 Motor HP (horsepower), static pressure up to 1-3/4" WG (water gauge), 1400 to 1700 RPM (speed), and an option of Phase Motor Type: Single Phase ODP (115V) or Three Phase ODP (208-230/490 Tri Voltage). The primarily used for exhaust of relatively clean air from wide range of commercial, industrial and institutional environments such as manufacturing and assembly plants, office buildings, schools, hospitals, restaurants, athletic facilities and many others.
Additional Information:
 | SDB Series Detailed Specifications (PDF) |
| SDB Series Typical Specifications (PDF) |
| Backdraft Damper Detailed Specifications (PDF) |
| ROOF-CURB Detailed Specifications (PDF) |
| SDB Series Installation Instructions (PDF) |
An Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
