- Hafele Foldaway Bed Fittings Hardware Kit - Lengthwise Mounting
- Furniture supplied by the customer
- Allows for the construction of foldaway beds according to your own plan
- The cabinet and bedbox constructions require a wood thickness of 20mm
- A minimum 40x40 square beam is needed on four sides as slatted frame support
- It is essential for foldaway beds to be secured against tipping, according to EN 1129 (check the floor for suitability)
- The angular feet with mounting plate are screw-mounted to the foot side of the bed frame and to the inside of the front panel
- Instead of legs, large handles can be mounted which serve as supports when the bed is in the down position
- Another possibility is an overhead shelf
- Note: Successful and safe installation of fitting hardware set and construction of bed requires a professional skill level.
- Supplied With:
Foldaway fittings with pivot bearing and positioning bolt for gas pistons
2 Safety Stops
Detailed Mounting Instructions
- Gas Pistons (Sold Separately) Click here
- Note: Order gas pistons separately depending on bed weight - 2 pcs. Required per bed
- Pre-stressed with tightening strap
- Tightening strap needed to install or remove piston from fitting set
| Bed Weight
|| Pushing Force
|| Item No.
| 110 lbs.
|| 900 N
| 132 lbs.
|| 1100 N
| 154 lbs.
|| 1300 N
| 176 lbs.
|| 1500 N
| 198 lbs.
|| 1700 N
| 220 lbs.
|| 1900 N
- Retaining Straps for bedding (Sold Separately) Click here
- With contact closing
- Needed to install or remove piston from fitting set
| For Mattress Width
|| Item No.
| up to 35-7/16"
| up to 47-1/4"
| up to 55-1/8"
- Angular Feet (Sold Separately) Click here
- To support the opening
- When opening the bed, the angular feet must be extracted, turned by 90º and retracted to the stop
- Steel, powder-coated
| For selecting the gas-loaded spring, the bed weight is needed.
Bed box and slatted mattress frame + Mattress and bedding
| = Bed weight
| Mattress width + 2x bed frame thickness + 125mm
| = internal cabinet height
| Mattress length + 2x bed frame thickness + 54mm
| = internal cabinet width
| Gap on four sides between cabinet and front panel
| = minimum 4mm
(W = side to side) (D = front to back) (H = top to bottom)
Max Width: 59"
Max Height: 90"
Min. Depth: 17"
This Hafele Foldaway Bed Fittings Hardware Kit with Lengthwise Mounting allows for the construction of foldaway beds according to your own plan. The cabinet and bedbox constructions require a wood thickness of 20mm and a minimum 40x40 square beam is needed on four sides as slatted frame support.
Ships via UPS/FedEx Ground
An Aoife Company LLC Store
500 Bic Drive, Suite 103, Milford, CT 06461
Tel: (203) 374-5425 Fax: (203) 373-0810