Hafele Murphy's Bed Vertical Queen Size Wall Mechanism Kit in Black, Perfect for Lofts, Guest Beds, Home Office

View all from Hafele

Vertical Queen Size Wall Bed
Wood Panels, Slat Sytem, and Cover Caps Not Included - Customer Supplies Own

Installed View
Wood Panels Not Included - Customer Supplies Own

Open Close Illustration
Wood Panels, Slat Sytem, and Cover Caps Not Included - Customer Supplies Own

Wood Bed Panel
Wood Panels Not Included - Customer Supplies Own

Wood Bed Panel 2
Wood Panels Not Included - Customer Supplies Own

Comfort Slat System
Shown Here with Frame as Illustration - Slat System Sold Separately - See Accessories

2-Piece Cover Cap
Sold Separately - See Accessories

1900N Gas Pistons
Included with Bed Kit

Wood Panels to Create Wall Cabinet for Bed and Mattresses: Not Included (Customer Supplies Own)

Step 1: Order Bed Kit (Frame, Safety Brackets, Gas Pistons, and Mounting Hardware)
Step 2: Order Optional Comfort Slat System: (For Extra Support) Click Here
Step 3: Order Optional Cover Caps: (Conceals Mounting Plate and Pistons) Click Here
Step 4: Order Optional Gas Pistons: (For Less or More Strength) Click Here

Shop for similar items:

Foldaway Bed Fittings Hardware Kit - Lengthwise Mounting

$359.07

Hardware Mechanism for "Murphy" Foldaway Bed, Available for Single, Double/Full, or Queen Size Beds

$3548.60

Features:

Hafele Murphy's Bed Vertical Queen Size Wall Mechanism Kit
Kit Includes Frame, Safety Brackets, (2) 1900 Newton Gas Pistons, and Mounting Hardware
Fits Queen Mattresses Up To 254mm (10") Thick
For Vertical Folding Beds
Space Saving: Ideal for Lofts, Guest Beds, Home Office, etc.
Optional Comfort Slat System and Cover Caps for Complete Look (Each Items Sold Separately) Click Here
Quick and Simple Assembly
Material/Finish: Steel, Black
Application: For Queen Size Matrress (Not Included)
Wood Panels to Create Wall Cabinet for Bed: Not Included (Customer Supplies Own)

Wall Bed will not Operate Properly unless the Below Weight Ranges are Adhered to:
Front Panel Weight: (100 lbs) 45 kg
Mattress Weight: (65-85 lbs) 29-39 kg
Comfort Slat System or Plywood Sheet: (30-35 lbs) 14-15 kg
Combined Lifting Capacity: (195 - 220 lbs) 88-98 kg

Adjustment: Door brackets attach front panels to support bars for quick and simple installation. Door brackets include height adjustment screws that allow for easy adjustment of front panels. Ends are rounded so that doors can slide left to right for a better adjustment. Turn the screw counter clockwise to loosen = door will go down. Turn the screw clockwise to tighten = door will go up.

Professional installation Recommended: Successful and safe installation of hardware and construction of casework requires a professional skill level. Casework to be constructed of high quality material with a minimum thickness of 19 mm (3/4"). Cabinet must be safely secured against tipping, three safety brackets are included.

Gas Pistons: Additional Pistons are Available, Individually Priced and Sold as Set of 2 Click Here

Ordering Instructions with Detailed Information:
Step 1: Order Bed Kit - Mechanism Kit Includes Frame, Safety Brackets, (2) 1900 Newton Gas Pistons, and Mounting Hardware
Step 2: Order Optional Comfort Slat System - For Extra Support, Easy to Install, Flexible Curved Wood Slats, Attaches to Frame Click Here
Step 3: Order Optional Cover Caps - Conceals Mounting Plate and Pistons for Complete Look Click Here
Step 4: Order Optional Gas Pistons - Available if Lighter or Heavyier Mattress or Front Panels are Being Used Click Here

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

Queen Outside Dimensions: 66-13/16" W x 16" D x 86-7/16" H (1697mm W x 4068mm D x 2196mm H)
Queen Inside Dimensions: 65-5/16" W x 14-1/2" D x 84-15/16" H (1659mm W x 368mm D x 2158mm H)
All Measurements are for 3/4" Thick (19mm) Board

Wood Panels to Create Wall Cabinet for Bed: Not Included (Customer Supplies Own)
Cabinet Dimensions

Note: Internal Dimensions Must be Consistent with the Instructions to Maintain Safety and Optimal Functionality.

Description:

The Hafele Vertical Queen Wall Bed Kit includes a frame, safety brackets, (2) 1900 newton gas pistons, and mounting hardware. Fits Queen mattresses up to 254mm (10") thick, the bed kit is for vertical folding beds and space saving which is ideal for lofts, guest beds, home office, and many more. Optional comfort slat system and cover caps for a complete look (each items sold separately). Quick and simple assembly. The bed kit is made of durable superior steel in a black finish. Wood panels to build wall cabinets are not included (customer supplies own).

Additional Information: