Illustration 1 During overlay (side to side) adjustment, the knuckle moves with the door, so that there is no unsightly gap between the door’s edge and knuckle.
Illustration 2 Door overlay (side to side) adjustment is on the base plate as opposed to the door component. This offers continuous adjustment in both directions +1/-2 mm.
Illustration 3 Depth adjustment is achieved with oblong holes ± 1 mm. This allows for application of door seals or to correct distortion of door.
Illustration 4 Height adjustment (up and down) is on the door component rather than base plate. This means only the door moves and not the knuckle. This is particularly important on rows of cabinets when knuckles are back to back as they will stay in alignment.
Illustration 5 The important "Safety Screw" (Not included - See Optional Accessories) does not effect the adjustments.
Matt Nickel Full Overlay Arm
Matt Nickel Twin Overlay Arm
Matt Nickel Full Overlay Arm No Screws
Cup Matt Nickel Screw Mounted Sold Separately, See Accessories
Cup Black Screw Mounted Sold Separately, See Accessories
Cup Matt Nickel Dowel Mounted Sold Separately, See Accessories
Cup Black Dowel Mounted Sold Separately, See Accessories
Mounting screws may not be available due to supplier shortages Easy Clip On/Off
Step 1: Select Hinge Arm Step 2: Select Finish Step 3: Order Cup Click Here Step 4: Order Screws Click Here
The Aximat® 300 is the Only 3D Hinge that Meets the Highest Requirements of the Woodworkers Institute and ANSI/BHMA Grade 1 Standards
(W = side to side) (D = front to back) (H = top to bottom)
The Aximat® 300 Single Pivot Institutional Cabinet Hinge by Hafele has a sleek sophisticated design and the arm and cup clips together that no tools are required. This institutional hinge is available in Matt Nickel finish.