Hardware Resources 303FU Series Heavy Duty Full Extension Side Mount Ball Bearing Slides, Load Rating 100 lbs, Sold as Pair, 14" Length to 28" Length, Zinc or Black

(W = side to side) (D = front to back) (H = top to bottom)

Available Sizes:
14", 16", 18", 20", 22", 24", 26", or 28" Length
Load Capacity Rating: 100 lbs

The Hardware Resources 303FU Series Heavy Duty Full Extension Side Mount Ball Bearing Slides are made with cold-rolled steel and feature a clear zinc electroplated finish. These slides have a load rating capacity of 100 lbs and a side spacing of 1/2" with a 45mm (1-7/8") profile height. They also feature height and side adjustments of +/- 2 mm and +/- 1.5 mm (1/16") respectively and come with a lubricated steel ball bearing with a cage that holds it in place during drawer member installation. Additionally, the slides are equipped with a synthetic rubber hold-in detent that prevents bounce back and roll out, as well as a non-handed trigger disconnect release for dependable use. This model is great for almost any application and is recommended to be used with 6.3mm Euro screws or #8 x 7/16" truss head screws (not included). It is Grade 1 ANSI/BHMA certified and suitable for kitchen and bathroom use.