Part # | Physical Specifications | Cabinet Requirements (min) | ||||
Width | Depth | Height | Width | Depth | Height | |
4WTCD-343HFL-1 | 13'' | 21 to 38-11/16" | 3-3/4" | 13-1/2" | 21-3/4" | 4-1/2" |
4WTCD-343FLSC-1 | 13-1/2" | 21-11/16 to 38-11/16" | 3-3/4" | 13-1/2" | 21-3/4" | 4-1/2" |
4WTCD-419FL-1 | 15-15/16" | 21 to 38-11/16" | 3-3/4" | 16-1/2" | 21-3/4" | 4-1/2" |
4WTCD-419FLSC-1 | 16-1/2" | 21-11/16 to 38-11/16" | 3-3/4" | 16-1/2" | 21-3/4" | 4-1/2" |
4WTCD-495FL-1 | 18-15/16" | 21 to 38-11/16" | 3-3/4" | 19-1/2" | 21-3/4" | 4-1/2" |
4WTCD-495FLSC-1 | 19-1/2" | 21-11/16 to 38-11/16" | 3-3/4" | 19-1/2" | 21-3/4" | 4-1/2" |
4WTCD-572FL-1 | 21-15/16" | 21 to 38-11/16" | 3-3/4" | 22-1/2" | 21-3/4" | 4-1/2" |
4WTCD-572FLSC-1 | 22-1/2" | 21-11/16 to 38-11/16" | 3-3/4" | 22-1/2" | 21-3/4" | 4-1/2" |
4WTCD-724FL-1 | 27-15/16" | 21" | 3-3/4" | 28-1/2" | 22-1/4" | 4-1/2" |
4WTCD-724FLSC-1 | 28-1/2" | 22-3/16" | 4-3/8" | 28-1/2" | 22-1/4" | 4-1/2" |
4WTCD-876FLSC-1 | 34-1/2" | 22-3/16" | 4-3/8" | 34-1/2" | 22-1/4" | 4-1/2" |
![]() | Well made. Just what we wanted. by: Mark Chang ✔Verified Buyer from: Alameda, CA on: January 17, 2023 |
Shipping was great. Heavy package, well protected, no damages.
Don't panic with the precise installation instructions. Quite straight forward once you understand how the brackets work -- just a few screws and done!
I have a non-standard dimension cabinet in a small space. One side is Frameless and the other side has Face Frame. I ordered a Frameless drawer for the best dimensions, and then ordered a rear BLUM bracket from Amazon -- simple fix. Leveling the drawer and the drawer plate will require patience :) |
|
![]() | Love the functionality. by: Carol ✔Verified Buyer from: Tahoma, CA on: September 17, 2018 |
The drawer size was a perfect replacement for my existing drawer. The only issue I didn't anticipate was the thickness of the new drawer sides was thicker than my old drawers. This meant my drawer slides were mounted too wide. I had the bottom of the new drawer sides trimmed about an 1/8" and it worked perfectly. |
|