1.800.667.8721 or Live Chat (9AM - 6PM EST)
Custom Inserts Hinged Lid
Hinged Lid with Flush Pull
Shown with Finger Pull Sold Separately
Shown with Finger Pull Sold Separately
Hinged Lid with Knob
Shown with Knob - Comes Standard with Hinged Lid
Shown with Knob - Comes Standard with Hinged Lid
Hinged Drawer Cover with Knob
Shown with Knob - Comes Standard with Hinged Lid
Shown with Knob - Comes Standard with Hinged Lid
Flush Pull
Optional Finger Pull Sold Separately
Optional Finger Pull Sold Separately
Finger Hole
Optional Finger Hole Sold Separately
Optional Finger Hole Sold Separately
Acrylic Knob
Shop for similar items:
Features:
- Custom Inserts Hinged Lid
- Able to easily install on the top edge of your drawer box
- 1/4" thick acrylic covers install on the top edge of your drawer box
- Enhances the beauty of your cabinetry
- Adds function and efficiency to protecting stored items
- Sold with a knob as a pulling mechanism; fingerhole or flushpull available separately (See Accessories )
- To open with a knob, requires minimum of 3/4" clearance above your drawer box. Flush Pull requires 1/8" clearance. Finger hole does not require any clearance.
- Includes double-sided clear acrylic tape for easy mounting, or can be drilled and installed with screws
- Also available with or without vent holes
- Optional Velour Liners (Sold Separately) Click Here
- ***Specify outside dimensions of your drawer box or actual dimensions required - nothing will be deducted from dimensions of this item
- These items are made to order and cannot be cancelled after 3 days. They are non-returnable.
Ordering Instructions for Hinged Lid:
1.) Measure your outside drawer box width
2.) Measure your outside drawer box depth
**Nothing is deducted from dimensions of item
Description:
Custom Inserts now offers the advantages of our acrylic bread box in a new bread box deck version with their Hinged Lids. Able to easily install on the top edge of your drawer box, the hinged lid allows easy access to the items in your drawer. No more ill-fitting sliding lids to leave open or lose in your cabinetry, the lids are built to your dimensions so they always fit perfectly. Our bread box deck enhances the beauty of your cabinetry while adding function and efficiency to protecting stored items. Choose whether you would like a knob or a fingerhole or flushpull (available separately) as a pulling mechanism. Also available with or without vent holes.
Ship Method:
- Ships via UPS/FedEx Ground
Product Reviews:
 | Quality Product at Reasonable Cost by: Lorna ✔Verified Buyer from: Redondo Beach, CA on: May 3, 2017 |
| This is our second order for a custom made bread drawer cover. Each time the product was produced exactly to the specs. Very classy looking and loved by our clients. We also appreciated having someone return our emails when we requested expedited handling. Jessi promptly replied and gave us an earlier ship date. We will order again from this company! |
|
| I love it! by: Margaret Morehouse ✔Verified Buyer from: Brewer, ME on: October 26, 2012 |
| We are delighted with this custom product. i can see the baked goods in the drawer, the knob is a magnificent improvement over the plastic slide cover we had before, that never worked correctly and was covered with duct tape where pieces broke and the cover cracked. The install was so easy my husband did it himself. A worthwhile investment. Thank you.
PS The customer service was very helpful. It did takes several weeks for delivery. My patience was well rewarded. |
|
Your questions that we answered:
 | We are ordering the hinged bread drawer lid. If we order the Flush Pull, will it come already installed on the drawer lid? Thank you. Kathy - Asked about product CI-HDC19 | |
 | Yes, if you were upgrading to a flush pull (CI-HDC-FP), it would be installed onto your CI-HDC19 upon arrival. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| how do i order with flush pull or hole? - Asked about product CI-HDC19 | |
| The Flush Hole and Finger Pull can be purchased additionally under "Accessories", and here is the link: Click here |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Hi - I assume I am measuring the inside of the drawer? Is this easy to install? and do you recommend with or without vents for bread storage? thank you - Asked about product CI-HDC19 | |
| The breadbox hinged lid cover is attached to the drawer top using double-sided acrylic tape (they can also be screwed onto the drawer, though few do this). The vent holes are recommended so, that if the items in the box are moist the items can dry. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| What is the depth of the insert? The dimensions of my drawer are 11 1/8w x 17 1/8d and 10 3/4 high. Thank you Bill - Asked about product CI-HDC19 | |
| Item CI-HDC19 is just a hinged lid, not an actual box that goes into your drawer. These items are also custom made to your specific dimensions so you would get to chose the depth. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| 1) Why does your website ask for the drawer inside dimensions when the picture shows the lid installed on top of the drawer box and thus aligining with the drawer box OUTSIDE dimensions? Do you make it per the dimensions we submit or do you add some set amount to the dimensions we provide? 2)How does the bread drawer attach to the top of the wooden drawer: Glue? Drill and screw? There are no visible fasteners in the picture shown on your website. - Asked about product CI-HDC19 | |
| We require the outside dimensions of the drawer, not the inside ones, for our hinged drawer cover. The cover attaches with 1/2" double sided tape that we place on the insert when it ships. The customer simply removes the backing, and attaches it to their drawer. |
|
| 100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0) | ||
An Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
