| Can these drawers come without face fronts? - Asked about product CC-CD03-36-DIV |
| | These don't come with a face front. You would have to supply the cabinet front.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Can you remove any of the dividers? I would be ordering the 15" cutlery drawer, but imagine that this has the dividers shown in view 2. Just wondering if you can customize the dividers on either level. Thank you! - Asked about product CC-CD03-23-DIV |
| | With item DDCVV201418-DIV the dividers are not removable in the lower half. They can be removed in the upper drawer, but it would need to be requested as due to the custom sizing, we would need to get a quote because it would be an additional charge.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Hi
I am getting several two-tier drawer inserts.
when i measure the inside of my drawers it is 20" front to back
the drawer is 5" in height (the inside from drawer floor to the inside top of the drawer
the width is 13.5" across. (this is the exact width from one wall, inside of the drawer to the inside if the other drawer wall.
It would seem that I need to order the 20" deep and tell you that my drawer width is 13.5"
HOWEVER... do I need to order the drawer to be 20" x 12.5" to account for the mounting hardware?
HELP
THanks - Asked about product CC-CD03-25-DIV |
| | Yes, the side mount slides need an extra inch of space in width, so you want to allow for this extra space when measuring your cabinet width. If you have 13.5" of width, you would need to put 12.5" width for the drawer. This gives you that extra inch of space for the slides.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|