Installation Instructions |
Great product - tweaks suggested by: Stephen Tonsor ✔Verified Buyer from: Pittsburgh, PA on: February 24, 2022 |
|
We are delighted with the product. Greatly increases the ease in using our heavy KitchenAid mixer. Three tweaks:
1. We put a handle on the top outside edge of the chopping block platform we installed as the surface on which the mixer sits. This greatly increases the ease in pulling the platform up from its stored position.
2. The release handles under the platform are set are bit far back for ease of release. We mounted the platform at the suggested 8-1/2 inches back from the front of the platform. This makes a bit of a reach for the release handles for small hands. I am adding extensions on the release handles to make them easier to reach.
3. The directions have adjustment of spring tension as the final step. This would be so much easier to accomplish with the mechanism clamped on a work bench and readily accessible BEFORE installation.
Overall, very happy with the product! |
|
Highly Recommend. by: Kelly ✔Verified Buyer from: Ketchum, ID on: February 3, 2020 |
|
High quality sturdy components. Easy to install.
Great Product! |
|
I have a shelf but am having a hard time lifting it with both my KithcenAd and Cuisinart on it - which is why I bought it. Is it possible to have a motor on it to bring it up automatically? - Asked about product RAS-RAS-ML-HDSC | ||
RAS-RSRAS-RSML-HDSC is only made to hold the maximum of 60lbs, and both appliances may be too heavy together for the lift. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
I have a 21" frameless cabinet with an opening of 18-1/2" wide will this mechanism RAS-ML-MPHDSCCR-18 fit this size? I am concerned about the mounting hardware. Your information on site states minimum opening of 16.5 but does not give maximum opening. Please advise. Thank you in advance. Best Regards Laura Mergens Sullivan ASID,NCIDQ,CMKBD,CID 714.878.7698 CELL 407.774.4400 - Asked about product RAS-ML-MPHDSCCR-18 | ||
RAS-ML-MPHDSCCR-18 would have the following minimum dimension requirements: 15" W x 23-5/8" D x 27" H, the maximum recommended width is 24" W. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
I don't see a power cord or electrical outlet in your picture of the Mixer Lift. Can power be supplied inside of the cabinet or would it interfere with the operation of the lift? Thank you, Ann - Asked about product RAS-ML-MPHDSCCR-18 | ||
Item RAS-RSML-MPHDSCCR-18 is just the lift mechanism arms and maple shelf- we do not provide any cabinetry, mixer or electrical materials. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||