Installation Instructions |
I had carpentry tools and skills.. by: Roger Desilets ✔Verified Buyer from: Naples, FL on: November 5, 2018 |
|
The item we ordered was shorter and smaller than anticipated. I made the adjustments, shimed, and was able to fit it in the cabinet space. However, I needed: folding ruler, speed square, roof square, clamps, drill bits, topped level, screwdrivers, extra screws, and extra wood and PVC. It took three days with help. If you order this cabinet, measure the opening carefully... |
|
Turned out great by: Nancy jaeger ✔Verified Buyer from: Springfield , Mo on: April 6, 2018 |
|
Turned out great, but a little challenging since it was retrofitted to existing cabinetry. Love them to hide clutter. We installed 2 30ā appliance garages and one corner one. Love them |
|
Quality product by: Russell Galloway ✔Verified Buyer from: Jacksonville, Te on: May 3, 2017 |
|
I didn't need all of the kit, just the tambour door and track. Not too many people around here know how to install one much less repair one, so I'm winging it. So far so good, but the product is USA made and very good quality. |
|
Great quality by: chuck hammer ✔Verified Buyer from: Charleston, So on: September 6, 2016 |
|
Have stained and fitted the garage, just need to install. |
|
Very good by: Stan Leus ✔Verified Buyer from: Hawthorne Woods, IL on: June 10, 2015 |
|
Pretty good product.
I wish there was a top rail pc to cover
the curve at the top but overall I'm very happy with it. |
|
... by: meena verma ✔Verified Buyer from: Charleston, SC on: October 27, 2014 |
|
The ordering process was easy. It was delivered in about 7 to 10 days as expected. Haven't installed it yet so will know the quality of the product itself at that time. |
|
My cabinets are 17.25" from the bottom of the inside of the cabinet to the granite and 16.25" from the very outside of the cabinet to the granite. How long are the tambour tracks? Will I be able to cut the wood down to 16.25" without affecting the tambour track? - Asked about product NA-A0160MUF1 | ||
To use NA-A0160MUF1, you do need a minimum height of 18-18-1/4" high. The width is trimmable, however, the height is not. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
I would like a 12" top and 23" side panels so I can use it for medical storage on my counter - Asked about product NA-A0160OUF1 | ||
Unfortunately, Omega National does not make any appliance garages with custom sizing, and these can only be made to the sizes listed on our site. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
What is the inside height clearance from the open door to countertop? - Asked about product NA-A0160HUF1 | ||
Per Omega National, the Wood Tambour Kitchen Straight Appliance Garage inside height clearance is 14-1/2" high. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
What is the difference in color in maple and oak? - Asked about product NA-A0160MUF1 | ||
Maple and Oak are wood species options, as NA-A0160MUF1 is made of actual wood. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
Can this be painted or stained by my cabinet people? Iām planning my kitchen with black cabinets, but having had this door type appliance garage previously, I really want one again. - Asked about product NA-A0160MUF1 | ||
Yes, this Omega National Wood Tambour Kitchen Straight Appliance Garage is ready to paint or stain. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
What color is the maple stained? - Asked about product NA-A0160MUF1 | ||
The wood that is used to make the garage is maple - it arrives unfinished so the customer has the option to paint or stain the garage to their liking. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
If I wanted to paint this with a latex based "chalked" paint, which material would be best to purchase? Does the wood matter pre-painting? - Asked about product NA-A0160QUF1 | ||
The maple is the best material for painting. |
||
100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
Can the height of this be trimmed to 16 3/4 inches? That is the height from countertop to cabinet. - Asked about product NA-A0160HUF1 | ||
Yes this item is trimmable and can be trimmed down to your height requirement. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
My opening is 27" wide by 17 1/4 high. Is there a garage that will fit this? - Asked about product NA-A0160QUF1 | ||
Unfortunately this item requires the Counter to Cabinet height to be 18" to 18-1/4" H. You can view item: Click here - This item is trimmable on the width and the height. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
The dimensions I need are: 32 1/2" wide, 23" high, and 11 1/2" deep. This product is what I want, but of course the dimension are not exact. Can it be configured to fit my cabinet? thanks. - Asked about product NA-A0160OUF1 | ||
Unfortunately these are not customizable, you can only trim these garages down. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
We have a cabinet opening 26" wide, 25 1/4 deep, 20 3/4 height, in red oak. Will the 30" be adaptable for this? What is exactly in the kit? thank you - Asked about product NA-A0160OUF1 | ||
Per the manufacturer, it can be trimmed down to the size you need. If you look at the second image on the page, you will see what the kit consists of. The items included are the Tambour door, the track, end panels, appliance garage rail, and hardware for mounting. You can also view the install instructions for a better idea: Click here |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
Do you have any suggestions for mounting your under cabinet garage on a quartz count top other than drilling into stone and inserting a receiver of some type ? Thank you, Mauro - Asked about product NA-A0160MUF1 | ||
Omega National suggests using a caulk of some sort or another. Use masking tape to hold it in place until the caulk dries. You could also use some double stick tape. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
I am looking for a unit like your NA-A0160OUF1, but I am unsure of dimensions. I need vertical height of 17" and width of 33" and 36". I await your response. - Asked about product NA-A0160OUF1 | ||
The Appliance Garage Dimensions are: 30" W x 11-3/4" D x 18"H
Refitting of the cabinetry will be necessary to attempt this installation. Click here |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
Is it possible to purchase this appliance garage in a 36" length? Thanks much - Asked about product NA-A0160OUF1 | ||
This Tambour Door Kit is not available in the size you require however, separately purchasing the Tambour Track System (NA-ST-2-36) and the Trimmable Red Oak 47-1/2W x 24H Tambour (NA-V-3-RO505) will suit your needs, just the same. For pricing and to place order please, contact 800-667-8721. |
||
100% of 3 people found this useful. Was this useful to you? Yes (3) | No (0) | ||
What are the dimensions? - Asked about product NA-A0160CUF1 | ||
The Dimensions on the Wood Tambour Straight Appliance Garage is 30" W x 11-3/4" D x 18" H |
||
67% of 6 people found this useful. Was this useful to you? Yes (4) | No (2) | ||
Can the height be made smaller as well? - Asked about product NA-A0160OUF1 | ||
he height can be made smaller however this would require that you cut the item once you receive it to fit your needs. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
Does this product comes in 24inch width? - Asked about product NA-A0160QUF1 | ||
Here is a link to 24 appliance garage options: Click here |
||
75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1) | ||
I have a toaster oven that is 16 inches deep. Can it be deeper that 11 3/4 inches deep? - Asked about product NA-A0160MUF1 | ||
What you can do is purchase the Appliance Garage Components package which supplies the door and the mechanics, but you would have to use your own side walls. This allows you to create any depth you wish. Here is the link to that page:
Click here |
||
100% of 3 people found this useful. Was this useful to you? Yes (3) | No (0) | ||
Can the straight appliance garage kit's width be cut down from 30" to a smaller size? Our space where we need one is 15" H x 28" W x 11" Deep. Thank you for your assistance. Sincerely, Karen Tieken - Asked about product NA-A0160MUF1 | ||
Yes, it can be cut to a smaller size by using a saw. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
Re. Omega Series Fronts/Components for Straight Unit Appliance Garages Is the wood finished or unfinished? - Asked about product NA-A0160MUF1 | ||
All Omega National appliance garages come unfinished. What you are choosing is the species of wood, and you can stain or paint to match your existing cabinetry. |
||
100% of 2 people found this useful. Was this useful to you? Yes (2) | No (0) | ||