Hafele Kessebohmer "Top Flex" Pull-Out Kitchen Table System Fittings

View all from Hafele

Hafele "Top Flex" Pull-Out Kitchen Table System

Kitchen View 1

Kitchen View 2
Table top and front panel are customer supplied

Actual Fittings

Table top and front panel are customer supplied

Shop for similar items:

"Rapid" Pull-Out Kitchen Table, Maple, Min Cab Opening: 22-1/8" x 19-1/4" D x 4-3/4" H

$430.12

"Rapid" Pull-Out Kitchen Table, White, Min Cab Opening: 22-1/8" x 19-1/4" D x 4-3/4" H

$430.12

Features:

Extensino fitting can support any width up to 35-1/2"
Table top and front panel are customer supplied
Top Flex Pull-Out Table System adds up to 32" of extra workspace depth
Maximum load: 66 lbs.
As the table is extended, the front panel drops down automatically until the top is flush with the table
Recommended table top thickness: 5/8"
Finish: steel, plated

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

Extended depth: 32"
Cabinet width: 17-3/4"- 35-1/2"
Interior cabinet opening height: 4-3/4"
Minimum cabinet depth: 20"
Specifications

Description:

The Top Flex Pull-Out Table System Fittings adds up to 810mm (32") of extra workspace. With a customer-supplied tabletop and front panel, the pull-out table system has a maximum load capacity of 66 lbs. The extension fitting can support any width surface up to 900mm (35-½").When the table is pulled out, the front panel drops down automatically until the top is flush with the table. Set supplied with full extension fittings.

Additional Information:

Detailed Specifications

Assembly Instructions

Ship Method:

Ships via UPS/FedEx Ground

May we also suggest...

Your questions that we answered:

	Hello! With the Hafele "Top Flex" pull-out kitchen table system, do you HAVE to make it 32" deep or can you make the table top a tiny bit smaller, like 28"? Thank you! - Asked about product HA-505.70.200
		Yes, HA-505.70.200 would be good for up to 32"D, and if you only have 28"D than you would still be able to use this Pull-Out Kitchen Table System Fitting.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	So this just comes as a top not a cabinet with a pull out table top???????? - Asked about product HA-505.70.200
		Item HA-505.70.200 is just the fitting for you to be able to install a pull out table. We do not sell cabinets, you would need to provide your own cabinet, drawer front and table top pieces.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	Will this pull out fit into an 18" W cabinet? - Asked about product HA-505.70.200
		Item # HA-505.70.200 is actually just the fittings, it does not include the top; that is something you would need to acquire locally. The dimensions required for the fittings are: 17-3/4" - 35-1/2" x 20"D x 4-3/4"H.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)