top_bar
 
top_bar
top_bar
top_bar
1.800.667.8721 or Live Chat (9AM - 6PM EST)
Top

Hafele Maple Upper Wall Cabinet Pull-Out Organizer

(4)
Maple Wall Pull-Out
Wall Pull-Out
Maple Wall Pull-Out
Application
Comes with side rails
$110.45 - $128.12
Model:
Choose a product below
Shipping:
Free Shipping
Qty?
Features:
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)

HA-545.47.212: 4-7/8" W x 11" D x 26" H, for 9" cabinets
HA-545.47.214: 7-7/8" W x 11" D x 26" H, for 12" cabinets
Description:
Use this Wall Pull-Out by Hafele as a pull-out in 9" or 12" framed cabinets. With adjustable shelving and an open top shelf, this pull-out is great for extra storage space in your kitchen. Able to hold up to 100 lbs., this pull-out has full extension Accuride ball bearing slides and is available in multiple widths.
Additional Information:
Ship Method:

Product Reviews:
Good but not great
by: Ian     from: Bettendorf, IA      on: December 27, 2016
 I purchased this unit so that I could have easier and faster access to my spices. The good: Material quality Packaging Shipping speed The not so good: Should have included mounting screws/bolts for most common installation. I would really have appreciated a little more extension on the guide rails.


Good - Installation today
by: Richard     from: Sarasota, Fl      on: September 15, 2016
 Just back from clients home and my installer is there today, checked it out this morning and all looked fine Great service and shipping


...
by: Jan     from: Melbourne Beach, FL      on: October 20, 2014
 Nice and sturdy fit the space well. Only down side is that it was expensive for such a small shelf.


Exactly what we needed.
by: Dan     from: Seneca, SC      on: July 20, 2012
 This is a high quality product which fit our need perfectly. Everything was exactly as described in the literature. Customer service was superb. Attention to detail by the Kitchen Source customer service representative had them contact us to make sure everything was correct prior to shipping the product.


Your questions that we answered:
Can this be trimmed? 24 " tall?   - Asked about product HA-545.47.212
 Unfortunately this cannot be trimmed.
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

I have a 9" wall cabinet, 30" high. Technically this would fit, but the inside of the cabinet contains a bottom and top "rail" at the back of the cabinet that lessens the depth to 10.5 inches. Will this still fit? I am trying to find something that I can fit into the cabinet to make it a spice cabinet. Thanks   - Asked about product HA-545.47.212
 If you do not have 11" clearance on the depth, this item will not fit.
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

1. I'm assuming that when you give the dimensions, you are measuring the base box that the shelf system sets into. Am I right? 2. The installation instructions say in BIG letters that they pertain to a BASE cabinet pull out. It's the 11 inch depth one I'm planning to order. Are the directions for installing it any different? Thank you.   - Asked about product HA-545.47.212
 1. Yes, when measurements are taken, they are measured from the furthest parts of the organizer.

2. The installation would be the same, as you are securing the organizer to the bottom of your cabinet or pantry.
 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0)

My cabinet is 28 inches high and 11 deep not counting the 3/4 inch which the door closes into. All this looks good for the Hafele Maple Upper Wall Cabinet Pull out Organizer. I have 14 inches in width (excluding the european style hinges). Effective 14 width. Would it be possible to put TWO of these shallow pull outs into that space??? I do NOT want to attach them to the present door (can't because of those huge hinges). Thank you for a more or less prompt response. Sally Mussetter   - Asked about product HA-545.47.212
 Hi Sally, this is meant to be used for an overall 9" framed cabinet, because although the bottom slides screw into the bottom of the cabinet, the bumpers need to be installed to the inside edge of the cabinet face frame at height of top rail on pull-out, one on each side. You wouldn't be able to install the bumpers if you put two next to each other. Here are the mounting instructions: Click here
 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)

Do you have anything like this for a 12" wide wall cabinet (also 12" deep)? Or any kind of pull-out drawers? Thanks.   - Asked about product HA-545.47.212
 We do not sell an upper cabinet pull out that is 12" W x 12" Deep, but most of the upper cabinet pull outs are able to fit a 12" depth. You can view all of the upper cabinet organizers here: Click here
 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0)


An Aoife Company LLC Store
1136-1146 Stratford Avenue, Stratford, CT 06615
Tel: (203) 374-5425    Fax: (203) 373-0810
email: support@kitchensource.com