Hafele Hardware Mechanism Appliance Mixer Lift-Up Fitting, Steel, Silver, 30 lbs

Lift-Up View

Inside Cabinet View

Features:

Hardware Mechanism Appliance Mixer Lift-Up Fitting
Perfect for the CuisineArt and Kitchen Aid mixers
Made of Steel
Silver finish
Raises effortlessly with a gas cylinder assist and then locks securely into place
Load bearing capacity: 30 lbs
Can be outfitted with a custom block platform or a quality pre-made maple wood platform such as these Block Platforms - Install 1/2" down and 1/2" back from upper Face Frame
Lift can be positioned at two different levels: flush with counter or 2" below counter
Includes 1 left arm and 1 right arm

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

Internal cabinet width: Platform surface + 64 mm (2-1/2")
Internal cabinet depth: Maximum platform depth or 330 mm (13")
Internal cabinet height: 608 mm (23-61/64")

Specifications

Description:

This Hafele Hardware Mechanism Appliance Mixer Lift-Up Fitting is perfect for the CuisineArt and Kitchen Aid mixers. Made of steel with a silver finish, the lift-up fitting raises effortlessly with a gas cylinder assist and then locks securely into place, with a load bearing capacity of 30 lbs. The fitting can be outfitted with a custom block platform or a quality pre-made maple wood platform.

Ship Method:

Ships via UPS/FedEx Ground

Accessories:

May we also suggest...

View Similar Items....

Your questions that we answered:

	Will this unit work in a cabinet 16" deep? Our height is good and door with is no problem but the inside depth is on 16" - Asked about product HA-504.20.900
		The required dimensions for item HA-504.20.900 are as follow: Internal cabinet width: Platform surface + 64 mm (2-1/2"), Internal cabinet depth: Maximum platform depth or 330 mm (13") and Internal cabinet height: 608 mm (23-61/64").
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	I am looking for a lower cabinet lift, my cabinet has a drawer on the top. Can this unit be used in this configuration? - Asked about product HA-504.20.900
		Unfortuantely this unit will not work with a drawer above. We do not carry any appliance lifts that will work with a drawer on top of the cabinet.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)

	Can you use this lift in a cabinet with a drawer on top? - Asked about product HA-504.20.900
		The lift can be positioned at two different levels: flush with counter, or 2" below counter; so unless your drawer would only be 2" H, having a drawer above the cabinet would not work.
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)