Hafele Quick-Set Drilling Jig for Handles

Name: Hafele Quick-Set Drilling Jig for Handles
Brand: Hafele
Rating: 4.7 (6 reviews)

View all from Hafele

(6)

Quick-Set Drilling Jig for Handles

Application

Features:

Drilling jig for handles
For precise drilling and positioning of handles on doors, flaps and drawer fronts
Convertible side stop, can be used horizontally and vertically
Material: plastic with hardened drilling bushings
Drilling bushings: for drilling Ø 4.3 - 4.6 mm (11/64”-3/16”)
Drill hole spacing: adjustable from 64 -143 mm (2-1/2”-5-5/8”)
Distance from edge: adjustable from 26 -103 mm (1 1/16”-4 1/16”)

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

Drilling bushings:
for drilling Ø 4.3 - 4.6 mm (11/64”-3/16”)
Drill hole spacing:
adjustable from 64 -143 mm (2-1/2”-5-5/8”)
Distance from edge:
adjustable from 26 -103 mm (1-1/16”-4-1/16”)

Description:

This Quick-Set Drilling Jig by Hafele makes it easier to install and position handles on doors, drawers and flaps more precisely. The drilling jig is made of plastic with hardened drilling bushings and has a convertible side stop that can be used horizontally and vertically. Drill hole spacing is adjustable from 64-143 mm (2-1/2" - 5-5/8") and the distance from the edge adjusts from 26-103 mm (1-1/16" - 4-1/16").

Ship Method:

Ships via UPS/FedEx Ground

Product Reviews:

	Did the job. by: Robert Ewing ✔Verified Buyer from: Potomac, MD on: November 7, 2018
	Worked perfectly. Wish it was made out of metal rather than plastic. For the price it should have been metal so it would be sturdier and make it easier to tighten the screws

	Quick setup, alignment without problems! by: Mike ✔Verified Buyer from: Magnolia, Tx on: January 23, 2014
	Needed to find a drawer pull that would cover over 4" pulls. This is so easy to align and setup. They shipped it and had it in a few days! Great service!

	Good product! by: SJS ✔Verified Buyer from: St. Louis, MO on: March 2, 2012
	This jig saved me hours upon hours of time measuring each cabinet door and drawer. It also gave me the confidence to measure and drill, assuring consistency. I was able to complete a large kitchen in under 2 hrs. The only limitation this jig has is if you're trying to put hardware on larger drawers where the size is beyond the limits of the jig.

	Great way to have cabinet hardware mounted perfectly! by: Dwight ✔Verified Buyer from: Murphy, NC on: March 2, 2012
	This drilling jig is easy to use. It make mounting cabinet hardware quick and accurate.

	Very Helpful by: MIchael Warnken ✔Verified Buyer from: rio rancho, nm on: January 3, 2012
	Did its job very well and save me the cost of carpenter or cabinet person coming to do it.

	This was a gift for someone else. I Have mine. by: Ara G ✔Verified Buyer from: Chatsworth, CA on: August 25, 2010
	I bought the guage for a fiend who is a professional cabinet maker. I do have my own and have used it in many occasions.

Your questions that we answered:

	Can jig do both left and right hand doors without changing bottom stop - Asked about product HA-001.31.233
		No, you will need to change the stop for the different doors.
		75% of 4 people found this useful. Was this useful to you? Yes (3) \| No (1)

	Does it extend to fit drawers 14"—30 inches? - Asked about product HA-001.31.233
		"This is intended for: Hardened drilling bushings: for drilling Ø4.3–4.6 mm (11/64""–3/16"") Drill hole spacing: adjustable from 64–143 mm (2 1/2""–5 5/8"") Distance from edge: adjustable from 26–103 mm (1 1/16""–4 1/16"") Convertible side stop, can be used horizontally and vertically"
		67% of 3 people found this useful. Was this useful to you? Yes (2) \| No (1)