| My drawer is smaller than the small version of the peg board. I understand it is trimmable. It's made of vinyl. What tools would I need to be able to cut it to size? - Asked about product RAS-4DPBG-2421-1 |
| | You can cut the vinyl with a pair of shop scissors or a craft knife.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Can you give an idea of the height and diameter of the included canisters? Thanks. - Asked about product RAS-5DCH-2-1-CR |
| | The height of the canisters are 4-1/8"H; but unfortunately the manufacture was not able to provide the diameter. The canister holder is 6-1/2" wide though, so I would assume a little smaller than that.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Looking for a system like this that will fit a drawer that is 19-1/2 deep. Do you have anything besides 21-1/2? - Asked about product RAS-4DPBG-2421-1 |
| | This item is a trimmable item. We do not have it in 19-1/2" D, however the 21-1/2" D can be cut down.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| I have a question regarding which Peg Board would fit best. I have 36 inch wide cabinets but measuring inside the drawer itself it measures 31 1/4 inches. Do I have to get the larger peg board to fit inside the drawers? - Asked about product RAS-4DPBG-3921-1 |
| | If you want to trim the item for a perfect fit you would need the larger 39-1/8" Pegboard. If you did not care however about the 1-1/8" gap, you could use the next size down which is 30-1/8" W.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|