 | If I install this so mixer can be slid onto counter, can I lower the platform to get it out of the way then lift the platform and slide the mixer back onto it to put the mixer away? - Asked about product KV-HAL-20 |
|  | Yes, that is the purpose of this appliance lift.
|
| | 50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) |
|
 | Is the 16-1/2" wide shelf for a 21" wide cabinet opening? - Asked about product KV-HAL-20 |
|  | The KV-HAL-20 is the lift hardware only, the shelf is sold separately. If you purchase the 16" shelf, then it would require a 18-1/2" Opening. If you make your own shelf, the overall width would be the size of your top + 2-1/2".
|
| | 50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) |
|
 | What is the minimum cabinet depth measurements for installation. I want to install in a cabinet that is not 24 inches deep. - Asked about product KV-HAL-20 |
|  | The minimum cabinet dimensions are: 13-1/2" or 16-1/2" W x 18" D x 1-1/2" H.
|
| | 50% of 4 people found this useful. Was this useful to you? Yes (2) | No (2) |
|
 | Does this lift have a soft close feature? - Asked about product KV-HAL-20 |
|  | It does not have soft close. For a soft close option please view Click here
|
| | 67% of 3 people found this useful. Was this useful to you? Yes (2) | No (1) |
|
 | The page is not clear in it's description of the depth of the cabinet. - Asked about product KV-HAL-20 |
|  | The correct depth is 18"D
|
| | 75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1) |
|
 | Does this lift have a locked setting when extended for use ?? How difficult is it to return to the stored position?? Thank you. Lynn - Asked about product KV-HAL-20 |
|  | Yes, the stand lift locks into place. Ease of returning to stow away position is moderate. To collapse, pull the release handle on the bottom side of hardware unit.
|
| | 60% of 5 people found this useful. Was this useful to you? Yes (3) | No (2) |
|
 | What is the maximum weight this shelf lift can carry? I have a heavy meat slicer and desperately need to get it off my kitchen counter. I make pure liver treats for pets, but the slicer sure is an eye sore.
Gaylene - Asked about product KV-HAL-20 |
|  | Maximum weight capacity is 30lbs.
|
| | 50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) |
|
 | How much clearance do I need on each side for the brackets. I have a 12 inch wide cabinet opening and the door is half inch into the opening how much space do I need for the bracket to slide out and up so I can figure out how wide the platform could be? Hope that makes sense. - Asked about product KV-HAL-20 |
|  | This Knape & Vogt Appliance and Kitchen Mixer Lift item is the hardware only. This is for use with your own custom shelf or you can purchase the 13 1/2" or 16 1/2" Shelf. Because you only have 12" of space, you can purchase the 13 1/2" shelf and trim it down to the size you would require.
|
| | 70% of 10 people found this useful. Was this useful to you? Yes (7) | No (3) |
|
 | Can your appliance be used while it is on the platform? - Asked about product KV-HAL-20 |
|  | As long as the maximum weight capacity of 30lbs is not exceeded, appliances can be used while on the lift.
|
| | 75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1) |
|
 | Can this product be used in a cabinet under a drawer? - Asked about product KV-HAL-20 |
|  | No, the appliance lift is for use in a cabinet without a drawer, only.
|
| | 79% of 14 people found this useful. Was this useful to you? Yes (11) | No (3) |
|