1.800.667.8721 or Live Chat (9AM - 6PM EST)
Hafele Roll-out Maple Pantry Trays for Face Frame/Frameless Cabinetry
Product View
Slides & Pilaster Kit Sold Separately
Slides & Pilaster Kit Sold Separately
Tray for 15"W Cabinet - 3-1/2"H
Tray for 18"W Cabinet - 3-1/2"H
Tray for 21"W Cabinet - 3-1/2"H
Tray for 21"W Cabinet - 3-1/2"H
With Pilaster Adjustable Roll-out Tray Support
Required; Sold Separately
Required; Sold Separately
With Pilaster X-Series Bracket Kit
Required; Sold Separately
Required; Sold Separately
Step 1: Choose Cabinet Configuration/Tray Size
Step 2: Order Required Drawer Slides: Click here
Step 3: Order Pilaster System: Click here
Step 2: Order Required Drawer Slides: Click here
Step 3: Order Pilaster System: Click here
Shop for similar items:
Features:
- Hafele Pull-Out Pantry Trays
- Available for Frameless and Face Frame Cabinetry
- Material: Solid Maple
- Available in Multiple Sizes
- 5/8" Solid Maple with Dovetail Construction
- Notched and Drilled for Undermount Slides
- Simple, Stylish Kitchen Storage/Organizer
- Drawer Slides Required for Installation, (See Required Drawer Slides) & Matching Slide Device, (See Required Slide Device)
- Pilaster System Required for Installation, (See Required Pilaster System)
| Purpose of | Detailed Information |
|---|---|
| What is difference between "With Flange" vs "Without Flange"? | Flanged front locking devices fasten into lower edge of drawer subfront. Installation screws are driven at a convenient perpendicular angle and suggested only for narrow drawers minimum inside width 3-3/4". Devices without flange require drilling into rear lower area of sub front. Screw is angled in typically due to driver bumping into drawer bottom. Neither strength nor frameless/face frame characteristic determine which device. Cabinet maker preference for easiness of fastening determines choice of flanged vs non flanged. |
| What is the Purpose of Pilaster System? | For standoff to fasten roll out trays. Each tray has height adjustment on pilaster without tools every 1-1/4". |
| What is the reason for the different size Standoff 1/4" or 5/16" for Pilaster System? | Difference is stand off distance from inner wall of cabinet to drawer slide fastening. Standoff distances vary based on various widths of face frame overlay in from of cabinet wall, size of hinge and mounting plate intrusion into opening, etc. |
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
Tray Depth: 21-1/8''
Tray Depth: 21-1/8''
Additional Information:
 | Detailed Specifications (PDF) |
Ship Method:
- Ships via UPS/FedEx Ground
Product Reviews:
 | Worked Great by: James Kress ✔Verified Buyer from: Little Compton, RI on: December 19, 2019 |
| The shelves, tracks and pilasters worked perfected in my standard sized base cabinets. They replaced the simple shelves that were difficult to use. |
|
| Great product easy to install. by: Peter Stein ✔Verified Buyer from: Hendersonville , NC on: November 7, 2019 |
| We ordered these slide outs to complete our new kitchen. They were very easy to assemble and install. When finished they look like they were installed in the factory, and not an add on.
I highly recommend this product for anyone wanting to upgrade their kitchen. |
|
Your questions that we answered:
 | What is the actual width of these drawers? The opening of my cabinets are 18” exactly. - Asked about product HA-557.59.113 | |
 | Is your cabinet framed or frameless? If Framed, you would want to use: HA-557.59.113 (the shelves themselves are 13-9/16" W). If you have a frameless cabinet, you want to use: HA-557-59.123 (these shelves are 14-1/16" W). |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| I am trying to fill half of a blind corner cabinet. Do both pilaster systems need a right wall to mount to? Or could they mount against the back inside-front of the face frame? - Asked about product HA-557.59.112 | |
| Each shelf requires 4 pilasters and all 4 pilasters need to be attached to the side panels of a cabinet. Anything else being considered would be experimental and need to be worked out by a cabinet maker or other woodworking person. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| I want to mount to shelves in pantry. I need to secure the slides to back wall of opening so the shelves don’t tip when pulling out the drawer. Can these be used and what back wall bracket do I need to keep the shelf from tipping forward. I don’t want to mount to side but to the shelf itself. Can this be accomplished? - Asked about product HA-557.59.127 | |
| If using the Elite Plus or Dynapro slides, use rear mounting bracket HA-433.19.051. If using the Salice slides, use this rear mounting bracket, HA-433.17.000. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Is cabinet width the inside measurement of the cabinet? - Asked about product HA-557.59.115 | |
| The Cabinet Width is the cabinet opening needed. It is the width needed to pull the item in and out. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| What is the exact depth and width of the tray? - Asked about product HA-557.59.112 | |
| For item HA-557.59.112, the dimensions are as follow: 10-9/16"W x 21-1/8"D x 3-1/2"H. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| how long is the cabinet. I need it to be 15 wide by 23 long. thank - Asked about product HA-557.59.112 | |
| We do not sell cabinets; item HA-557.59.112 is the slide out tray only. The dimension of the tray itself is 10-9/16"W 21-1/8"D x 3-1/2"H |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| I would like to convert half of my existing pantry to slide-out drawers. There are wooden shelves currently inside bracketed to side and rear walls. What type of mount would I need to put in 21" shelves? Do I attach them to the existing wooden shelf? - Asked about product HA-557.59.115 | |
| This product fixes to the sides of the inside of the cabinet; you would select for width and mount to the sides or to a pilaster kit. You would also need to purchase a pair of glides and clips for each drawer box. This PDF shows all the information: Click here |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| What is the depth (front to back) of the tray? - Asked about product HA-557.59.127 | |
| Per Hafele, it's 21-1/8" front to back. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| does this item # include the roller assembly attached to the doors? I am doing 2 identical cabinets. Are pilasters included. Do I need the mounting bars or can I support from the existing half shelf for the top shelves and the cabinet base for the bottom. Are the roller slides soft closing ? if not are the available? - Asked about product HA-557.59.115 | |
| Item HA-557.59.115 is just for the drawer. You would also need to order the slides as well as the pilasters. If you look on the product information page above where the pricing is listed, it states step 1-3; each step will show what needs to be ordered for you to have a complete drawer set up. All of the slides are undermount, so they would need to be mounted to the cabinet floor or existing shelf. The slides include both Soft & silent features on them. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
An Aoife Company LLC Store
500 Bic Drive, Suite 103, Milford, CT 06461
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
