Hafele Kessebohmer Tilt-Out Closet Organizer - Laundry Hamper in Chrome

View all from Hafele

Hamper in Cabinet

Laundry Hamper

Mounting Diagram

Step 1: Order Laundry Hamper here
Step 2: Order Required Fittings: see see below

Shop for similar items:

Tilt-Out Laundry Hamper Basket for Vanity or Closet, 17" W x 13-7/16" D x 19-1/2" H, Chrome Plated

$95.90

Tilt-Out Laundry Hamper Basket for Vanity or Closet, 17" W x 13-7/16" D x 19-1/2" H, White Epoxy-Coated

$67.44

12-1/2" W White Epoxy Coated Steel Wire Tilt Down Four Sided Laundry Hamper

$97.29

Tilt-Out Laundry Hamper Basket for Vanity or Closet, 17" W x 13-7/16" D x 19-1/2" H, Matt Nickel

$104.29

Features:

Tilt-Out Laundry Hamper
Lowered handles
For hanging on a mounting rail attached to the cabinet door
Designed higher at the front than the back, so it fits into a cabinet with the door front hinged at the base, instead of the side
Door to which this unit mounts is opened under spring tension by approximately 27º
To open or close, simply apply pressure directly to the door

Required Fittings: Click here to purchase
Mounting Bracket (HA-540.02.194):
Screw mounted
Width: 8-7/16"
Material: Steel, Finish: Chrome Plated
Spacing between holes: 6-19/64"

Hafele "Flap-Ex" Flap Hinge (HA-365.52.708):
Completely assembled
Includes 1 screw-on angular bracket, 1 round rod with plastic sleeve, 2 washers, 2 spiral springs, and 1 screw-on bearing, packed loose
Holds door open in a preset position
When the door is closed the flap is pushed back into the cabinet and secured by screw-mounted Mini Latch (HA-245.54.701)

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

9-3/8" W x 10-3/16" D x Front - 16-1/2" H, Rear - 14-3/8" H
For Cabinet Width: 11-3/4"
Capacity: 23.5 liters

15-1/4" W x 10-3/16" D x Front - 16-1/2" H, Rear - 14-3/8" H
For Cabinet Width: 17-3/4"
Capacity: 39 liters

Description:

Hafele's tilt-out wire laundry basket closet organizers are a practical addition to laundry room cabinets and closets. The lowered handle laundry hamper fits into tilt-out cabinets that have hinges at the base of the door. The wire baskets are higher at the front and have lowered handles so they can be hung on a mounting rail. The laundry hampers are available in two widths to fit most tilt-out cabinets. The mounting bracket is designed for screw mounting and uses a Hospa 4.0mm screw. The Flap-Ex flap stay holds the door open in a preset position and comes completely assembled with all the necessary hardware. The laundry hamper and mounting bracket are made of chrome-plated steel.

Additional Information:

Detailed Specifications

Ship Method:

Ships via UPS/FedEx Ground

Requirements:

May we also suggest...