1.800.667.8721 or Live Chat (9AM - 6PM EST)
Rolling Shelves Do-It-Yourself Cabinet Pull-Out Shelf for Kitchen, Bathroom, Closet, Storage or anywhere
View 1
Each shelf is sold individually
Each shelf is sold individually
View 2
Each shelf is sold individually
Each shelf is sold individually
View 3
Each shelf is sold individually
Each shelf is sold individually
View 4
Each shelf is sold individually
Each shelf is sold individually
View 5
Each shelf is sold individually
Each shelf is sold individually
View 6
Each shelf is sold individually
Each shelf is sold individually
Dovetail Detail
Lifetime Warranty on Shelves - Click here to see it in action
Each shelf is sold individually
Each shelf is sold individually
Features:
- As seen on TV, save money with our famous do it yourself shelves!
- Front, Side, Back and Bottom Constructed of Imported Baltic Birch
- Each shelf kit is sold separately/ individually
- The kits includes 3/4 Extension guides, hardware, and instructions - 22" slides pull out 17"; 20" slides pull out 15"
- Can hold up to 75 lbs with standard 3/4 guides (including the weight of shelf). Optional Full Extension Guides increase the capacity up to 100lbs (including the weight of the shelf) - when upgrading order to full extension guides, 3/4 extension guides will not be included
- 3/4 Extension Slides can mount to side wall of cabinet and can use included rear mount sockets to mount to back of the cabinet; or can use optional "Mount to Shelf" bracket kits - sold separately under accessories below - to mount down to a shelf
- Included rear mount socket sets attach to the back wall of the cabinet, and front guides attach to the front face frame of the cabinet opening
- Shelves come 30" wide and require an opening of at least 31" W (if used full width), spacers are included for up to a 32" opening
- Can be installed onto a cabinet's floor or full shelf with openings larger than 32-1/2" with the optional "Mount to Shelf" bracket kits - sold separately under accessories below - the brackets help make installing the pull out shelves a easier and includes hardware to mount 1 RollingShelf
- Drawer is 3-1/2"H and required 4" Height clearance
- Knocked down Kit comes in 30" W and can be cut down accordingly to fit almost any in cabinet openings, from 6" to 30" wide. Simply cut to size for a custom width
- These items are made to order and cannot be cancelled after 3 days. They are non-returnable.
- Optional accessories available separately
- Assembly Required
- Install Instructions
- Click to View Guides
- The unfinished shelves are available in a natural, hand sanded finish so they can be stained to match the customers existing cabinetry. Click to View Image
- The pre-finished shelves are available with clear coat so they look like natural maple Click to View Image
- Click Here to View Images of Optional Accessories
- Shelves
Made in the USA
- Optional Accessories: Click here to purchase
- Full Extension Ball Bearing Slides allow you to extend your new shelf completely so you can access all the items in the back of your cabinet
- Mount to shelf brackets makes installing the pull out shelves a little easier. They are bottom mount to existing full depth shelves or the floor of a kitchen cabinet.
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
20" D or 22" D
20"D shelves measure 19"-3/4 D (fit cabinet depths from 20" - 22" D)
22"D shelves measure 21"-3/4 D (fit cabinet depths from 22" - 24" D)
Sides and Back:1/2" Thick
Front: 3/4" Thick
Bottom: 1/4 " (with a white vinyl covering)
20" D or 22" D
20"D shelves measure 19"-3/4 D (fit cabinet depths from 20" - 22" D)
22"D shelves measure 21"-3/4 D (fit cabinet depths from 22" - 24" D)
Sides and Back:1/2" Thick
Front: 3/4" Thick
Bottom: 1/4 " (with a white vinyl covering)
Description:
Take organization to the next level with these Do-It-Yourself Pull-Out Rolling Shelves by Rolling Shelves. The possibilities are endless! Think kitchen, bathroom, office, pantry, garage, motor home, entertainment center, and more. These Pull-Out Shelves can be used for convenience in a variety of applications throughout your home. By design, the Do-It-Yourself Pull-Out Rolling Shelves make it easy to reach anything in your cabinets. While they are perfect for pot and pan storage in any kitchen, they also make for a great storage and accessibility option in any closet. Made of Baltic Birch with a Melamine bottom, the shelves feature dovetails that lock together for added strength. All kits come 30" wide and can be sized down to fit cabinet openings from 6" to 32-1/2" wide. The 22" deep shelves actually measure 21-3/4" deep and will fit cabinets that are 22" to 24" deep, and the 20" deep shelves actually measure 19-3/4" deep and will fit cabinets that are 20" to 22" deep. The cabinet pull-out shelves come pre-finished, with a clear coat for a natural Maple look, or unfinished, hand-sanded and ready to paint or stain.
Additional Information:
| Cutting Instructions |
 | Installation Instructions (PDF) |
| L-Bracket Installation Instructions (PDF) |
Ship Method:
- Ships via UPS/FedEx Ground
Optional Care Products:
5 oz. Tube - Available in a 3 or 12 Pack
*Combination of natural un-bleached beeswax & mineral oil
*Denser, thicker product than Mystery Oil - penetrates deeply into the grains of the wood, leaves a silky wax barrier and locks moisture in
16 oz. Tube - 3 or 12 Pack; 2 oz. Tube - 10 or 100 Pack
*Mixture of white mineral oil & beeswax
*Thinner product than the cream - more easily absorbed & penetrates more deeply into the grain of the wood to help protect & revitalize
1/2 Pint - 12 per case, 1 Pint - 6 per case, 1 Quart - 4 per case
*Makes repairs and fabrication a foolproof operation
*Can be used to touch-up tables with Varnique or Tuff-Var finish
*Can also be used on oil finish tops to convert them to varnique tops
Oil & cream available in sets with applicator *Anti-bacterial sponge prevents bacteria growth in sponge and on wood surfaces *Applicator also sold separately
New colored P.O.P. box design includes (1) Applicator, (1) Mystery Oil Bottle and (1) Board Cream Tube. All the content is securely placed in a custom die cut insert tray with simple care & maintenance instructions on the back of the box
Product Reviews:
 | Great assembly by: Carl Miller ✔Verified Buyer from: Knoxville, TN on: December 27, 2022 |
| I thought I purchased pre-finished sides but the ones I received were not. Bottoms are HDF board. I would pay a premium for a Baltic birch plywood bottom. |
|
 | Excellent product by: Jay Hiddinga ✔Verified Buyer from: Louisville, Ke on: March 17, 2022 |
| Very good craftsmanship. The pieces assembled perfectly. The installation was straightforward. |
|
| ... by: Phillip Horton ✔Verified Buyer from: Jasper, AL on: March 7, 2022 |
| Great product, well built with the best material. My wife likes her new slide out shelves. Having RA really bad it was hard for her to get the things she needed from under the cabinet, now she can just slide them out and get what she needs with all ease. |
|
| Great product. by: Harold ✔Verified Buyer from: Hockley, Tx on: September 3, 2021 |
| As long as you measure correctly these drawers work great. Fairly simple install. |
|
| ... by: Judy Hobbiebrunken ✔Verified Buyer from: Hastings , Ne on: May 19, 2021 |
| Just what I ordered by: Cris ✔Verified Buyer from: Downing , WI on: May 5, 2021 |
| This was just what I ordered. My only suggestion would be to put another coat of clearcoat finish on this product. |
|
| Perfect! by: Kathy Lathrop ✔Verified Buyer from: Hoquiam, WA on: February 10, 2021 |
| This is my second purchase from Kitchen Source. Well built and saving me so much space! |
|
| ... by: Brian w Yohnk ✔Verified Buyer from: Chippewa Falls, WI on: February 1, 2021 |
| Great for the price by: Jimrp ✔Verified Buyer from: Bonita Springs, Fl on: October 22, 2020 |
| I bought the shelves you put together. Easy to do. Half the price so you get two for what it usually costs to get one. Wish they came an inch or two bigger. The wood is unfinished so I slapped on a coat of polyurethane as well. |
|
| Top of the line product...except... by: Melvin E Nowlin ✔Verified Buyer from: Highland, Ca on: October 21, 2020 |
| The shelves and all of the hardware were even better than expected. The only issue is that the installation instructions were not for the product delivered. Two different sets were in with the drawers and even the set sent via an email were different still. This caused the installer to charge for extra time used to figure it out. Once installed the drawers are wonderful. |
|
| Great for the custom sizes I need by: David ✔Verified Buyer from: Suffolk , VA on: August 21, 2020 |
| Excellent by: Jim ✔Verified Buyer from: Broadview hts, Oh on: July 28, 2020 |
| Easy to use. Good quality. Good instructions. Took less than 3 hours per shelf. |
|
| DIY friendly by: Booker ✔Verified Buyer from: Winter Haven, FL on: July 1, 2020 |
| The pullouts were easy to install, well made, decent directions, and look nice. Had 5 pullouts installed in a couple hours. Try and be precise as possible with the measurements (with in 1/16"). It makes the install go extremely smooth. |
|
| Nice Product... But by: John Allen ✔Verified Buyer from: Phoenixville, PA on: June 30, 2020 |
| Easy to assemble. For the price, would have liked the bottom to be wood. Slides seem to be a little light/cheap. |
|
| Really Nice Shelf by: Reese ✔Verified Buyer from: Georgetown, CO on: May 20, 2020 |
| They had to be assembled. I'm glad we had the skills and tools to be able to put these together. They work great and I love the pull out shelves. |
|
| Received as advertised by: Ferretti ✔Verified Buyer from: Oxford , CT on: May 6, 2020 |
| ... by: Ruthanne Howard ✔Verified Buyer from: Galion, Oh on: April 22, 2020 |
| These were the perfect size. Didn't know we had to put them together but all is good. I would suggest you upgrade your instructions a bit with more picture showing. I would order again. I'm going to redo my kitchen and I'm keeping you in mind. |
|
| Excellent quality by: Phyllis Kerr ✔Verified Buyer from: Longs , SC on: April 15, 2020 |
| My husband put together four drawers in just over one hour. All of the components were cut to size and assembly was easy. I'll definitely be back to purchase more. |
|
| Very Useful by: Becca ✔Verified Buyer from: -, Id on: December 19, 2019 |
| These are true DIY shelves, so please be aware of that before ordering.
That being said, the shelves came with all the needed construct them, the directions are clear and come with pictures to help. I'm a 52-year-old English teacher, and I was able to construct the shelves (I ordered 9) myself. It may take some time, but I am very pleased with my results. |
|
| Reputable and responsive business! by: Susan D Hamilton ✔Verified Buyer from: Anderson, SC on: October 7, 2019 |
| I recently placed an order for two items. The upper shelf was shipped and I installed it with no problems. The bottom shelf as pictured came in damaged but I didn't have time to go through the time-consuming task of returning it. I did review the order when I received an email asking me to and let them know I was unhappy having received a damaged product.
I received an email, possibly the same day, asking what had happened and if I could send a picture of the damage. I did send pictures of the damage and was told I would be receiving a replacement shortly. WOW! You don't often find customer service this excellent. Thank you so much for being so thorough! |
|
| Love them! by: Josie M ✔Verified Buyer from: Bristol, CT on: April 1, 2019 |
| The only hard part was the instructions weren't as easy to use as we would have wished. Thank heavens my husband is good at doing things using common sense. Love the shelves, even if we're missing a little space inside the cabinets. I rearranged things to make all the important items fit, and the rest went into a closet downstairs. |
|
| ... by: Tina ✔Verified Buyer from: Va.beach, Va on: February 27, 2019 |
| This is wonderful I can now see everything in my cabinet. Should have done it years ago. It was s little work putting them together but well worth it |
|
| Good product.Easy to size by: Dennis Milbourne ✔Verified Buyer from: New Bern , Nc on: February 6, 2019 |
| Works just as I hoped. by: Wayne Harrison ✔Verified Buyer from: Powell, OH on: January 2, 2019 |
| This came just as the website said it would. It requires some skill to properly cut and install. Second one went much quicker and easier than the first one. Highly recommend this product. |
|
| Much better than wire alternatives. by: Paul ✔Verified Buyer from: Glastonbury, CT on: November 27, 2018 |
| Awesome DIY kit by: ALLFIXCT ✔Verified Buyer from: Farmington, Co on: November 9, 2018 |
| Great quality kit easy to install. Great instructions on how to measure,cut, assemble and install. My customer was very happy with the finished results. |
|
| Great product! Just what I wanted by: Karen A. ✔Verified Buyer from: Eagan, MN on: August 6, 2018 |
| Perfect solution by: Barbara Joritz ✔Verified Buyer from: Houston, Te on: August 1, 2018 |
| I needed easy access to my cats litter box that was in the bottom of a cabinet. The rollout shelf was the perfect solution |
|
| Cabinet Drawer Inserts by: Harold ✔Verified Buyer from: Cypress, TX on: June 20, 2018 |
| These drawers work flawless. Great brownie points with the wife!
They were easy to put together and install.
I would recommend these to anyone looking for more storage capacity ion their cabinets. |
|
| Excellent product by: Ken Drolsum ✔Verified Buyer from: Eagle, Wi on: February 27, 2018 |
| I was hesitant to order these as they were going into custom cabinets. They fit perfectly. They went together easily and I installed them in less that two hours. If I were 20 years younger and a little more flexible it would have taken less time. I took a chance on the finish and with the doors open you can't tell them from the original. You shipped promptly and the product arrived in excellent shape. Would not hesitate to recommend these shelves to anyone |
|
| Very Easy! by: Deb K ✔Verified Buyer from: Saint Charles, MO on: February 12, 2018 |
| These rolling shelves were very easy to assemble and install. I purchased two sets, one for my master bathroom the other for my kitchen. I did stain the wood pieces prior to assembly. The only negative is that it took two weeks to get. Price was very good though. |
|
| Great product! Some work involoved by: Brad Stanke ✔Verified Buyer from: Ixonia, Wi on: February 6, 2018 |
| My wife enjoys these rolling shelves, they are not extremely hard to build but you need to have some knowledge of using a saw and screw gun would be nice. After built they are strong and sturdy and can hold some good weight. I have now purchased two of these shelves! I recommend these to someone who has average knowledge of working on things, they are a complete build....thanks |
|
| Just what I needed for wide cabinet by: Heather ✔Verified Buyer from: Burlington , NC on: February 1, 2018 |
| I bought these because they were 30” and best price for drawers I could find. I added the base brackets which I think are little expensive but did make installation easy. Caution when screwing bottom onto the assembled sides to not get too far from edge or screw will come on the good side. Pilot holes would have been helpful. I plan to buy more after my initial purchase. |
|
| Very Nice Product. Very pleased by: Tom Carey ✔Verified Buyer from: Succasunna, NJ on: January 24, 2018 |
| My only one comment is I wish the instructions had more pictorals |
|
| ... by: Ms. B ✔Verified Buyer from: -, TN on: January 16, 2018 |
| My very handy husband installed. It took several hours for our first
rolling shelf. Ordered 3 more, hope it'll go as smooth or smoother. Can't
wait to use this newly "found" storage
under our bar!! Prompt and helpful
service provided. |
|
| Well built by: Cathy ✔Verified Buyer from: Lewisberry, Pa on: December 18, 2017 |
| Just received the sliding drawer so it hasn't been installed yet.Inspected the product and are very satisfied with the craftmanship. |
|
| Roll Out Shelves Are Great by: Carolyn Winter ✔Verified Buyer from: Cedar Creek, Te on: September 18, 2017 |
| My handyman said he couldn't make me roll out shelves at such a terrific price. They say they are unfinished but the bottom of the shelf is a smooth white laminate that will be easy to keep clean. The sides and front can be stained or just lacquered if you want to have the light colored wood. It's so much better than having to practically crawl into a floor cabinet to get to what's at the back. I love them. |
|
| Love them ❤️ by: Diane ✔Verified Buyer from: Trinity , Fl on: May 31, 2017 |
| I bought five of these my husband put them in my pantry they look and work great |
|
| Good Product, Good Value by: April ✔Verified Buyer from: North Las Vegas, NV on: March 13, 2017 |
| Received the drawers quickly and I was able to put them together in about an hour. (4 drawers). Word of advice...take your time putting them together and make sure the dove tails line up properly before securing the side rails and back. I did and they came out perfectly level and sturdy. Really happy with the results. |
|
| Great product by: Ron from: Beaufort, NC on: February 22, 2017 |
| Easy to install with basic tools and skill set. Well designed and it works as advertised. |
|
| ... by: Dale ✔Verified Buyer from: Tequesta, Fl on: November 24, 2016 |
| Product of very good quality for the money. Installation was very easy using the proper equipment. Nothing special needed but a good saw for square cuts is a definite plus. |
|
| Nice product, description too vague by: Doug ✔Verified Buyer from: shorewood, mn on: September 7, 2016 |
| Nice product, would buy it again. But!
After reading the description and ordering the product, I thought that it came with BOTH side mounting and bottom mounting hardware. I made my own bottom mounting brackets because yours are way too expensive shipping. |
|
| Sized, cut, assembled and installed in less than 45 minutes by: MIchael ✔Verified Buyer from: Bartlett, TN on: May 19, 2016 |
| This product worked as advertised. I do have the saws needed to cut it down which made as simple as possible. The instructions were easy to follow and useful. I would purchase this product again when I need another roll out shelf. |
|
 | More adjustment than expected. by: Michael Meixner ✔Verified Buyer from: Huntley, IL on: March 14, 2016 |
| One of the side brackets had minor shipping damage which I had bend out.
I followed the instructions to make my shelf one inch narrower that the narrowest point. I secured the side brackets with the 1/2" spacers provided. When fitting the shelf the brackets made the opening to narrow. In my opening the shelf should have been made 1/2" smaller than the opening not 1". I was able to compensate by taking one spacer out. |
|
| Worth the Money by: psychicbloodbrother from: Porterville, CA on: February 29, 2016 |
| I little pricey, free shipping helped, but we love the end result. Bought 4 more today. Why didn't we do this sooner? Handy man experience will come in handy. |
|
| Fast and hassle free by: Gerald F ✔Verified Buyer from: Davenport, WA on: March 10, 2015 |
| These rollout trays arrived unassembled in a box probably 2 weeks after I placed the order. I set up my portable tablesaw and cut the fronts, backs and bottoms all the same width as the directions showed. The sides dovetailed to the fronts and backs and I stapled the bottoms like I would normally if I was building the drawers in my shop instead of using the screws provided.
The trays went together beautifully and they installed into the cabinet easy. Note: the rear drawer guide sockets screw to the back of the cabinet. If your cabinet back won't hold a screw you need to use a strip of plywood or something as a secondary back to ensure the sockets will stay put. I saved a lot of time by using these trays vs building my own and am happy with the overall looks and quality. I will be using them more. |
|
| Great! by: Andy ✔Verified Buyer from: Cameron Park, CA on: June 2, 2014 |
| A bit expensive for 5 pieces of routered wood. BUT... they are the only self-install, fully width customizable units I've found.
Don't be fooled by the easy-sounding instructions. You DO need to have some "handyman" in you to get this job done. The instructions are VERY VAGUE on how to install the stilders.
OVerall... I WOULD buy them again. |
|
| GREAT! by: SMR ✔Verified Buyer from: -, IL on: April 24, 2014 |
| I have a small kitchen so storage space is limited. I love my pull outs I bought from kitchen source! The instructions were a little hard to figure out, but my hubby and I cut/assembled and installed two pull-outs in an afternoon. I love how they look custom and NOT cheap!
I will be ordering more in the near future!
Thanks! |
|
| Drawer pull outs by: Glenda ✔Verified Buyer from: Wampum, Pa on: April 15, 2014 |
| Nice drawers directions need to be made a little better . This is the only reason I gave it four stars |
|
| Great pull out by: Ed ✔Verified Buyer from: Lacey, Wa on: January 8, 2014 |
| Product is well made and easy to assembly with basic carpenter skills. A great investment to the kitchen. The wife loves them. |
|
| a good product by: John Pennington ✔Verified Buyer from: San Francisco, Ca on: September 28, 2012 |
| I bought 4 shelves. The directions are good, and should be followed precisely. (Many aren't.) Two of the bottoms were not quite square in my order, requiring a little trimming, but they installed fine.
A good bit of work is required, with some 40 small screws for each drawer. Installation is awkward for any cabinetry, this included. My drawers were a bit too wide, probably due to my inaccurate measurements, but fit fine when I sanded down the spacers.
The finish could have been smoother. I did some light sanding and put on some rubbing varnish. |
|
| Good product. by: Joe Shevchik ✔Verified Buyer from: Ebensburg, PA on: July 9, 2012 |
| Directions were good. They work well. |
|
| Perfect fit by: Mindy ✔Verified Buyer from: Pennsburg, PA on: March 13, 2012 |
| For years, we had been living with pull out drawers in the top of the lower cabinets, but not in the bottom. It was a chore to use any of the items on the bottom shelf of the lower cabinets. These sliding drawers make everything so much more accessible. The slide out shelves arrived in good time and my husband said the measurements were right on the money. The installation was easy and both cabinets were completed in an hour. Now we are using pots and pans that had been hidden from view. |
|
| Easy to install by: Jim Killingsworth ✔Verified Buyer from: Palmetto, FL on: August 25, 2011 |
| This is one of the easiest DIY projects my wife had me do. The Instructions were easy to follow and the parts fit without any modifications. The final results was better than expected. I recommend this DIY project to anyone. |
|
| Very nice product by: Richard ✔Verified Buyer from: Gaylordsville, CT on: January 31, 2011 |
| Quality made. Not for the novice. A miter saw or radial arm saw along with a table saw will make this look like a professional install. You can use a circular saw if need be. Instructions were accurate and easy to follow. The hardware provided was very adequate, The best part is that my wife is overly pleased with the product (as I am!). |
|
| Very pleased by: William Kover ✔Verified Buyer from: Piscataway, NJ on: November 17, 2010 |
| The pull out drawers were easy to install, and work great. |
|
| Very Satisfied by: Steve Donohoe ✔Verified Buyer from: Springfield, VA on: November 17, 2010 |
| Very precise product. The directions should be a little more detailed. The product is only as good as the installer.
|
|
| Well Built by: Jeff Artabasy ✔Verified Buyer from: MADEIRA BEACH, FL on: August 25, 2010 |
| This product was very well built and conformed to my cabinet with a few minor adjustments. My only criticism is the directions were a bit vague and confusing but after carefully studying it all was ok. I will buy a least two more of these drawers. |
|
| Very Happy With Purchase by: Jeff ✔Verified Buyer from: Shasta Lake, Ca on: January 19, 2010 |
| Fun project and Planning to install tomorrow. I stained and varnished the shelve. They look great and will be help in the kitchen. I would recommend this to friends. |
|
| Great! by: Greg White ✔Verified Buyer from: San Diego, CA on: December 3, 2009 |
| Built a custom base cabinet. These cut to fit shelves were a perfect solution for my none standard cabinet size.
The shelves are well machined, assembled easily and nicely took our finish without much preparation.
Would definitely reccomend them to anyone looking to improve their cabinets and contents accessibility! |
|
| Great! by: Donna ✔Verified Buyer from: Chester, MD on: October 2, 2009 |
| I love these shelves! They have made a real difference in how accessible my pots and pans are in a very inefficiently laid out old kitchen. You need to be handy to put them together but with the right "handy man" they make all the difference in the world! |
|
| Great product. Easy to install. by: Gilbert ✔Verified Buyer from: Fort Collins, CO on: August 26, 2009 |
| I just installed 4 of these shelves in my pantry and they work great! I don't have much in the way of carpentry skills but the instructions were easy to follow. I would recommend these shelves. |
|
| Wife loves the sliding drawers. by: Charles R. Rosales ✔Verified Buyer from: Copperas Cove, TX on: August 3, 2009 |
| The kit required little effort to cut to size and assemble. The instructions were easy to read and follow. Only difficulty I experienced was aligning the rails. In my case, the rails were attached only on the front and rear of the cabinet and care had to be taken to ensure correct alignment. |
|
| Great product by: Harry Whiting ✔Verified Buyer from: Niceville, FL on: July 14, 2009 |
| I LOVE the drawers as does my wife.....hence 3 more! Thanks for such a great product. |
|
| Great product! by: Toni ✔Verified Buyer from: Norwood, MA on: July 10, 2009 |
| Our set didn't come with instructions, but we were able to access them from the website. Easy to assemble!
Worth the $ and definitely worth the savings by doing it ourselves! |
|
| Great product!! by: Toni ✔Verified Buyer from: Norwood, MA on: July 10, 2009 |
| Our set didn't come with instructions, but we were able to access them from the website. Easy to assemble.
Worth the $ and definitely worth the extra savings by doing it ourselves! |
|
Your questions that we answered:
 | are these soft closures or are soft closures available for all your drawers. - Asked about product BU-CO254 | |
 | Unfortunately, Rolling Shelves does not offer soft close on their slides. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| The inside of my kitchen cabinet measures 29 inches, but when its opened, because of the space taken by the doors and the hinges, the available space becomes 26 inches wide. Would a 30 W x 20 D shelve fit a cabinet that has a 26 in opening? If not, do you have a product that will fit a 26 in cabinet? Please let me know, Thanks, Aida - Asked about product BU-CO255 | |
| If the opening space you have is 26"W, than BU-CO255 will not work, as it requires a minimum of 30"W. You would want to look into using item: BU-CO430 as it would require a minimum of 25"W. The link can be found here: Click here |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| How do I upgrade to the full extension option - Asked about product BU-CO254 | |
| To upgrade, you would want to select the full extension slides: BU-HFE-22. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Our cabinet is 24" deep. Is it better to order 23" or can we go ahead w/ 24"D? Also, do all mounting/installation hardware included with the order? What other items/accessories do you recommend that we purchase together? How do we order custom size online? Thanks for your help. - Asked about product BU-CO254 | |
| As long as you have a true 24'' D, then the 24'' depth will work. Yes, the hardware is included. The sizes cannot be customized other than what you see in the drop-downs on the product page. As long as you are installing on a base or full shelf nothing else is required other than the shelf. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| we need 4 drawers. Two are for base cabinet opening 26 w by 22 d The other two for cabinet 17 W by 22d d. Are these cabinet drawers more expensive than the one that is offered on your ad or can we cut that one for to fit the width. thank you - Asked about product BU-CO254 | |
| You could get this model BU-RSRTL203, but you may be better off with the Pre Assemble models, in which, it provides you with a model closer to your dimensions. Model # BU-CO443. Require opening 17"W x 22"D. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Does the BU-CO255 come with 20" full extension slides or are they an extra feature that cost extra? - Asked about product BU-CO255 | |
| Item BU-CO255 includes 3/4" extension slides with the pricing. The 20" full extension slides would be an additional cost. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| I would like 2 large drawers under my cooktop for pots and pans. I would like the cabinet underneath to have drawer fronts not a door. would I be able to attach the drawer fronts to the front of this item? - Asked about product BU-CO253 | |
| Since the door front is so shallow, I'm unsure if it would be able to be securely mounted to the door. I would try reviewing the Custom Drawers here - Click here - You can customize your drawer to 26" x 22" and even customize your drawer front; or call us for a quote for a bigger drawer. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| does the rolling shelves come with all slides - Asked about product BU-CO253 | |
| Yes, item BU-CO253 includes 3/4" extension slides with pricing. However, if you prefer full extension slides, you have an option to upgrade for an additional charge. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| can I get a unit like this but maximum 8 1/2 inches wide. - Asked about product BU-CO256 | |
| We do sell other sizes of the rolling shelves, here is a link to that page: Click here |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| We have undercounter kitchen cabinets of varying widths. There are no drawers now, just a half-depth shelf (and of course a floor). The shelf is removable. How customizable are these drawers? 1. Can one fit into a 23" wide cabinet and one into a 26 wide (for example). 2. If #1 -s YES - can these be side mounted (for the top drawer) and bottom mounted for the bottom drawer? 3. What is widest/narrowest cabinet for drawers? 4. Are those dimensions (#3) for side or bottom mount? 5. Are the bottom mount brackets at the edge of the drawers or inset? by how much 6. Can 3 drawers be mounted into one cabinet? (contents would then be short objects, like cans for example) Thank you - Asked about product BU-CO254 | |
| You will need to select a different model # as this one only has 2 sizes. Here is the link for the assorted sizes - Click here
1. Can one fit into a 23" wide cabinet and one into a 26 wide (for example). Yes, you can fit these drawers in various size cabinets; for the 23" opening you would need to select a 22" drawer and 25" drawer for the 26" opening. 2.If #1's Yes - can these be side mounted (for the top drawer) and bottom mounted for the bottom drawer? Yes, the standard 3/4 glides can be mounted on the side, but you will need mounting brackets if you want to mount to the cabinet floor or a shelf. 3. What is widest/narrowest cabinet for drawers? The narrowest drawer would be 6" and going up every 2"; 8, 10, 12to 30" wide 4. Are those dimensions (#3) for side or bottom mount? They can be for both depending on which glides you purchase. For the Standard 3/4 sides they're side mounted but refer back to answer 2 for mounting to a shelf. For the Full Extension they are bottom mount. 5. Are the bottom mount brackets at the edge of the drawers or inset? by how much Cabinets must have a full depth shelf or cabinet base for mounting. Click to View Images. 6. Can 3 drawers be mounted into one cabinet? (contents would then be short objects, like cans for example) Yes, it is possible |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| does this mean it fits a standard 30" wide cabinet? - Asked about product BU-CO253 | |
| No, a 30" cabinet would have a smaller door opening. This 30" shelf would require a 31" W door opening. |
|
| 100% of 3 people found this useful. Was this useful to you? Yes (3) | No (0) | ||
| Hi, I am interested in purchasing two of these shelves for my pots and pans. I do need 27 inches wide though and was wondering if I could order them out to this size or do we need to do it. (No worries if you can't cut them- my husband can but would rather y'all do it!) I just want to make sure as well that you measure from the opening of the cabinet, like where the cabinet door hardware is. I have le creuset pots and pans and they can be somewhat heavy. Is there a heavy duty hardware I can purchase to support these or is the hardware it comes with stronger enough? Many thanks! And sorry if this info is already here and I just haven't read on it. - Asked about product BU-CO254 | |
| This one is too big for your opening. The correct model number for your 27" opening would be BU-CO472, which is 26"W, but you will need that extra inch for the glides - Click here
When fully extended, this shelf will hold 75 lbs with the included 3/4 standard guides. With the full extension guides (ordered separately, and require the Mount to Shelf Brackets), it will hold up to 100 lbs including the weight of the shelf. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| do you make a pull out cabinet drawer opening is 20 1/2 x 23 deep 2 or 3 high? - Asked about product BU-CO256 | |
| This cabinet pull-out shelf is 18"W x 22"D (needs at least 19" opening as the drawer slides add on 1"): Click here - the front is 2" tall, and sides and back are 3-1/2" tall. We suggest using a shim in spaces that don't have the exact dimensions.
|
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| How far do the standard shelves pull out? - Asked about product BU-CO253 | |
| The standard shelving comes with 3/4" extension slides, which would extend out 3/4 of the way. If you wanted full extension slides, you do have an option to purchase them for an additional fee. If the full extensions are purchased, they would come already attached to the shelving for you. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Will these work for a framed cabinet vs. frameless construction? - Asked about product BU-CO254 | |
| Yes, it will work for both framed & frameless cabinets, you just need to measure a little different. For the frameless, you measure the entire opening and you take 1" off for the glides. For the framed cabinet, you measure inside the frame of the cabinet and also remove an 1" for the glides. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| I have maximum depth of 20". How long are the included drawer slides? Will be side mounting. - Asked about product BU-CO255 | |
| The included slides would also be 20" deep. |
|
| 50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||
| My base cabinet is 36 in. wide and 23 in. deep. Is there available a rolling shelf to fit that size cabinet? - Asked about product BU-CO256 | |
| The largest we would have is 30"W x 22"D - Click here |
|
| 67% of 6 people found this useful. Was this useful to you? Yes (4) | No (2) | ||
| Is this 30" wide drawer a "knock down" drawer that I could cut down to 24" wide? Also, do the slide pulls come with the drawer or do I need to order those separately? - Asked about product BU-CO254 | |
| Yes, this is a Do It Yourself unit which ships un-assembled. You can view the cutting instructions at Click here - The item can be cut down to 24". The item also includes the 3/4 ext. slides. |
|
| 50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||
| Does this drawer come fully assembled, or do I have to put it together and glue it? Thank you. - Asked about product BU-CO254 | |
| For model # BU-CO254 you would need to assemble and install. If you are looking for an already assembled unit you would just need to install: Click here |
|
| 50% of 2 people found this useful. Was this useful to you? Yes (1) | No (1) | ||
| could you give me details on the standard guides, i.e., are they poly wheels on metal tracks? do they have bearings? are they harder to pull out than full extension slides? thanks - Asked about product BU-CO254 | |
| The 3/4 ext. standard slides are ball bearing slides that can hold up to 75 lbs (including the weight of shelf), and they do slide out smoothly. The full extension can hold up to 100 lbs and are more heavy duty. |
|
| 67% of 3 people found this useful. Was this useful to you? Yes (2) | No (1) | ||
| can you get this insert for 26 "W x 22"D? - Asked about product BU-CO254 | |
| You can use item BU-CO448 which measures 26"W x 22"D, however you will need to ensure that you have at least 27"W because the slides need to be taken into account. |
|
| 50% of 4 people found this useful. Was this useful to you? Yes (2) | No (2) | ||
| In the description of bu-co253 you say: " All kits come 30" wide and can be sized down to fit cabinet openings from 6" to 32-1/2" wide." So will it fit the 29.5 cabinet (measured inside, from wall to wall) or not? - Asked about product BU-CO253 | |
| Please view the cutting instructions on our site at: Click here - The shelves come 30" wide and require an opening of at least 31" W if used full width. If you have a 29.5" W you would just trim the item down by 1/2" to fit your space. |
|
| 60% of 5 people found this useful. Was this useful to you? Yes (3) | No (2) | ||
| How do I measure for the pull out drawers? - Asked about product BU-CO254 | |
| You would need to determine the minimum cabinet opening you have along with the cabinet depth. |
|
| 50% of 4 people found this useful. Was this useful to you? Yes (2) | No (2) | ||
| Is any hardware included with the shelf kit? - Asked about product BU-CO255 | |
| Yes, this comes with the mounting hardware to mount the pull-outs in a cabinet. |
|
| 50% of 4 people found this useful. Was this useful to you? Yes (2) | No (2) | ||
| I am interested in your room out shelves for my kitchen cabinets. I would need 17" wide x 22" deep. Do you offer custom sizes. The description seemed to offer it. Please let me know how I can order that. I am looking to order 8 of these. Thank you, Vikki Neuman - Asked about product BU-CO254 | |
| The do it yourself series can be cut down by your or your installer to any size you would like. However, if you are looking for the item to be pre made in a custom size you would want to look at the pre assesmbled units instead at Click here - these are made 6 - 30" W in in 2" increments, and are all in even sizes. We can get a quote for you for a custom size however, to have the manufacturer make the item in 17" W to fit an 18" opening, the price on the item jumps up. If however, your overall opening is 17" then you would want the 16" which, with slides, would equal 17" overall and this would not have to be modified. If you would like to order you can reach us at 800-667-8721 and we will be happy to walk you through ordering information and provide better pricing. |
|
| 50% of 4 people found this useful. Was this useful to you? Yes (2) | No (2) | ||
| May I order the above shelf without any slides/glides? - Asked about product BU-CO253 | |
| Yes, you can order via phone by calling our customer service dept. at 800-667-8721 to place the order and specify no slides. |
|
| 60% of 5 people found this useful. Was this useful to you? Yes (3) | No (2) | ||
| You mention you have a knocked down kit? How do I order that one? - Asked about product BU-CO253 | |
| When you order BU-RSRTL103, it comes as a DIY (knockdown kit). Once you receive the shelves (the Kit comes in 30" W), they can be cut down accordingly to fit almost any in cabinet openings, from 6" to 30" wide. Simply cut to size for a custom width. |
|
| 57% of 7 people found this useful. Was this useful to you? Yes (4) | No (3) | ||
| Does the kit include 2 shelves as pictured? - Asked about product BU-CO253 | |
| Each shelf is sold individually for the Rolling Shelves Do-It-Yourself Cabinet Pull-Outs. |
|
| 50% of 6 people found this useful. Was this useful to you? Yes (3) | No (3) | ||
| my pantry is 36 1/2 in wide between the walls. Is there a way to install one or more of these units? - Asked about product BU-CO256 | |
| The largest Do it yourself shelf is 30" W, however you can look at the custom pre-assembled shelves at Click here - For a custom quote you can call our customer service department at 800-667-8721 or email the width and depth needed at cservice@eefaco.com |
|
| 50% of 6 people found this useful. Was this useful to you? Yes (3) | No (3) | ||
| Our cabinets are 30" wide and 24" deep. Can these roll outs be cut down a little to fit the cabinet? - Asked about product BU-CO253 | |
| These can be cut down to fit your cabinet width. You would cut front to width of cabinet opening minus 1" for drawer slides, then cut the bottom to width of cabinet opening minus 1" for drawer slides. Then you would cut the back to width of cabinet opening minus 1" for drawer slides. If you click on the installation instructions in the features, you can see a diagram. |
|
| 50% of 8 people found this useful. Was this useful to you? Yes (4) | No (4) | ||
| The description says that this can be sized down to fit smaller openings. Our cabinet width is 14 7/16". How is this product sized down to fit? Is that something I can do when it is delivered? - Asked about product BU-CO254 | |
| Yes, the width can be trimmed down to fit cabinet openings between 6" to 32-1/2" wide. This can be done with a a table saw or jig saw. |
|
| 62% of 8 people found this useful. Was this useful to you? Yes (5) | No (3) | ||
| Looking at the rolling shelves do it yourself kit. I need one roll out shelve, can you order one with hardware? - Asked about product BU-CO254 | |
| Yes, these shelves are sold individually with standard guides.
For additional optional Full Extension Guides and accessory options, see here: Click here |
|
| 50% of 6 people found this useful. Was this useful to you? Yes (3) | No (3) | ||
| I have a 27 1/2 inch wide cabinets. Is it possible to roll out shelves made at about 26 inches wide? Thanks! - Asked about product BU-CO253 | |
| This particular pull-out shelf is only available in 30W however, there is a Pre-Assembled Express Cabinet Pull-Out Shelf that is available in the 26W, here: Click here |
|
| 67% of 6 people found this useful. Was this useful to you? Yes (4) | No (2) | ||
| Is the depth of these modifiable, as well? Thanks - Asked about product BU-CO255 | |
| While, the Width of this Pull-out Cabinet can be sized down to fit cabinet openings between 6" to 32-1/2" wide, the Depth cannot be modified. This cabinet pull-out is only available in Depths of 20 (measures 19-3/4D and fit cabinet depths from 20" - 22" D) or 22 (22"D (measures 21-3/4D and fit cabinet depths from 22" - 24" D) |
|
| 56% of 9 people found this useful. Was this useful to you? Yes (5) | No (4) | ||
| Does this shelf come in 20in wide? Thanks - Asked about product BU-CO256 | |
| These shelves can be sized down accordingly to fit almost any in cabinet openings, from 6" to 32-1/2" wide. |
|
| 57% of 7 people found this useful. Was this useful to you? Yes (4) | No (3) | ||
| I have a base kitchen cabinet that is 33" wide ( 30" between front frames ). it's 22 3/4 " deep from back of cabinet to front frame. Will the above work? if so, what hardware should I buy? - Asked about product BU-CO253 | |
| These cabinet pullouts are a DIY product that is shipped "knocked down". The pullouts need to be cut to the desired width and assembled.
If you are installing as is, it will fit into a 31-32" opening. All of the hardware is included for normal installation however, if youre looking to mount on the floor or onto a full depth shelf, the Mount-to-Shelf brackets (BU-RSMTS101) might be helpful and can be purchased by contact our Customer Service Specialists, directly at 800-667-8721. |
|
| 56% of 9 people found this useful. Was this useful to you? Yes (5) | No (4) | ||
| Can the drawers be mounted with side-mount slides? What additional accessories would I need? Thanks. - Asked about product BU-CO253 | |
| All Rolling Shelves guides can be side mounted. The shelves come with 3/4 extension guides shown on this page: Click here You may have to shim the space between the drawer slides and the interior cabinet walls, for an accurate fit. |
|
| 62% of 8 people found this useful. Was this useful to you? Yes (5) | No (3) | ||
| If the rolling pull out shelf mounts to the existing shelf, why is the max cabinet opening limited to 32.5"? - Asked about product BU-CO255 | |
| This product can be installed onto a cabinet's floor or full shelf with the optional Mount to Shelf bracket sold separately under accessories on the page. With the brackets installed, the finished shelf can fit into openings larger than 32.5" |
|
| 67% of 9 people found this useful. Was this useful to you? Yes (6) | No (3) | ||
| will these fit the standard IKEA 30" kitchen base cabinets? - Asked about product BU-CO253 | |
| For a 30" opening, you should order a 28" Shelf, available on this page - Click here |
|
| 62% of 8 people found this useful. Was this useful to you? Yes (5) | No (3) | ||
| Can you tell me, I am assuming price is for one shelf. picture shows two and description says shelves. I want to make sure I order the correct amount. Thank you - Asked about product BU-CO256 | |
| Yes, the price is for one shelf. |
|
| 78% of 9 people found this useful. Was this useful to you? Yes (7) | No (2) | ||
| Do these shelves come with all the hardware to mount in a cabinet? - Asked about product BU-CO254 | |
| Yes, it comes with the mounting hardware. |
|
| 54% of 13 people found this useful. Was this useful to you? Yes (7) | No (6) | ||
| ROLLING SHELVES BU-CO473,BU-CO258 AND BU-CO260. DO YOU HAVE A PICTURE DETAILS HOW TO MOUNT ROLLING SHELVES IN EXISTING CABINETS.WHERE DOES THE L BRACKETS MONTH TO REAR WLLL OR BASE CABNET SHELF - Asked about product BU-CO256 | |
| This product does not use L-Brackets. This picture shows how the glides are mounted: Click here |
|
| 50% of 10 people found this useful. Was this useful to you? Yes (5) | No (5) | ||
An Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
