1.800.667.8721 or Live Chat (9AM - 6PM EST)
Tresco by Rev-A-Shelf 12VDC LED 16.4’ High Output FlexTape Roll, 3 Watts/Foot
In Kitchen
In Drawer
In Kitchen Drawers
In Soffit
Illuminating Jewelry
Illuminating Wallets
Illuminating Socks
Finishes
Example of Colors, Not Representation of FlexTape
Example of Colors, Not Representation of FlexTape
FlexTape Roll
Side View
Top View
Close-Up
Full Roll
Adhesive Backing
Can be cut
Ideal for Accent, Edge, Cove or Back Lighting, Toe Kick or Soffit
Step 1: Order Light
Step 2: Order Required Transformer & Starter Lead Cords: Click here
Step 3: Order Optional Connectors Click here & Other Accessories: Click here
Step 4: Order Recommended Infinex Extrusion: Click here
Making Lighting Easy as 1-2-3 with Plug-n-Play Design
Step 1: Order Light
Step 2: Order Required Transformer & Starter Lead Cords: Click here
Step 3: Order Optional Connectors Click here & Other Accessories: Click here
Step 4: Order Recommended Infinex Extrusion: Click here
Making Lighting Easy as 1-2-3 with Plug-n-Play Design
Shop for similar items:
Features:
- High Output FlexTape Roll LED Lights in Multiple Colors - Peel and stick virtually everywhere
- Requires use with Tresco 12VDC transformer only (See Required Transformers)
- Requires use with Tresco Starter Cord or Tee Starter Cord (See Required Starter Cords)
- 12VDC
- Available in Warm White 2700K, Neutral White 3500K, Cool White 4800K, Daylight 6500K, Red, & Blue
- 3 watts per ft.
- White color printed board maximizes light output
- Maximum continuous run is 16.4' (5m)
- May be cut every 1" (25mm)
- Maximum per transformer is 20' (6m)
- Lower heat, longer life than competing brands
- Linkable with Link Cord (See Optional Accessories - Starter/Link/Extension Cord)
- Strong 3M adhesive backing
- Dimmable with optional dimmers (See Optional Accessories)
- Infinex Aluminum Extrusions available - the extrusions allow the FlexTape to slide easily inside; 6 unique profiles to choose from (See Optional Extrusions)
- LED lights last up to 50,000 useful life hours - then just dims and less light comes in, does not just stop
- Uses 90% less power than conventional light bulbs
- Low power consumption - generates very light heat, making LED systems suitable for displays
- Also available in low output accent version
| Technical Specifications: | ||||||
| ID Number: | L-LED-FLXTPE-WRHO-1 | L-LED-FLXTPE-NRHO-1 | L-LED-FLXTPE-CRHO-1 | L-LED-FLXTPE-DRHO-1 | L-LED-FLXTPE-RRHO-1 | L-LED-FLXTPE-BRHO-1 |
| Light Color: | 2700K Warm White |
3500K Neutral White |
4800K Cool White |
6500K Daylight White |
Red | Blue |
| Wattage: | 3W/ft. (9.8 W/m) | |||||
| Lumens: | 149 per ft. (489 per m) | |||||
| Efficacy (lm/W): | 50 | |||||
| Input Voltage: | 12VDC | |||||
| Lamp Life: | 50,000 Hours | |||||
| Max Per 60W Power Supply: | 20' (6 m) | |||||
| Max Continuous Run: | 16.4' (5 m) | |||||
| Mounting: | Surface | |||||
| Warranty: | 3 Years | |||||
| Certifications: |   |
|||||
| Beam Angle: |  |
|||||
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
Description:
This High Output FlexTape Roll LED Light by Tresco by Rev-A-Shelf is available in Warm White 2700K, Neutral White 3500K, Cool White 4800K, Daylight 6500K, Red, & Blue. Featuring three watts per foot, the maximum continuous run is 16.4' (5m) while being cuttable every 1" (25mm).
Additional Information:
 | Installation Instructions |
| Transformer Information |
| Basic Specifications/ Information to Install 12V Lights |
| Dimmer & Accessories Information |
| Color Temperature Information |
| Understanding the Importance of Light Spread |
| ETL and UL – Testing, Inspection and Certification |
Ship Method:
- Ships via UPS/FedEx Ground
Recommended Extrusions:
Six unique profiles to choose from Multiple finishes available Extrusion allows FlexTape to slide easily inside
Optional Accessories:
Allows connection of more lights Up to 6 additional fixtures per block Cannot exceed 60W max load
Compatible with 12VDC Wall Dimmable Hardwire Transformers Offers more reliable dimming performance over standard dimmers
Required for all FREEDiM Series Dimmers Single Receiver can be controlled by up to 8 different remotes/dimmers
Mounts to any standard electrical box Can be programmed to up to 10 different receivers Requires use w/ Universal Receiver
Can be inset, installed w/ screws or adhesive, or used as a magnet Can be programmed to up to 10 different receivers Requires use w/ Universal Receiver
Can be installed w/ screws or adhesive, or used as a magnet Controls multiple sections of lighting independently from a single controller Requires use w/ Universal Receiver
Can be installed w/ screws or adhesive, or used as a magnet Controls multiple sections of lighting independently from a single controller Requires use w/ Universal Receiver
Can be recess or surface mounted Available in Door Sensor, Motion Sensor, Proximity Sensor, & Touch Dimmer options Controls 27W or 60W of lighting
Dimmer is screw mounted Can control multiple dimmers in same room with single remote control Controls up to 60W of lighting
Touch pad attaches to surface with adhesive Dimmer accommodates up to 3 transformers or fixtures that plug directly into the dimmer (3) Transformers control up to (18) 10W lights or (9) 20W lights
Low profile recessed installation Controls all fixtures on the system or each fixture separately through 1 transformer
Low profile recessed installation Wireless switching or dimming of up to three independent 12 volt circuits (zones) Max. 36W load capacity per zone
Required for all MultiSwitch Sensors Connect up to 3 sensors of the same style to universally control run of lights Max. 36W load capacity
Low profile recessed installation Available in Motion Sensor, Touch Dimmer, & Hand/Door Sensor options Requires use w/ MultiSwitch Station
Low profile recessed installation Cord attaches to any Tresco transformer Draws 10W at max capacity while charging & has auto shut-off
An Aoife Company LLC Store
500 Bic Drive, Suite 103, Milford, CT 06461
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
