1.800.667.8721 or Live Chat (9AM - 6PM EST)
Hafele Flipper Door System - Accuride CB123/1234, Inset or Overlay Application, For doors up to 42" high
In Cabinet
Without Hinges
With Hinges
Illustration
Mounting screws may not be available due to supplier shortages
Slide Length 12" - 28"
Step 1: Choose a length
Step 2: Order Hinges for CB1234: Click here
Slide Length 12" - 28"
Step 1: Choose a length
Step 2: Order Hinges for CB1234: Click here
Shop for similar items:
Features:
- Flipper Door System Accuride CB123/1234
- For Inset Frameless or Overlay Applications
- For concealed doors, entertainment centers, wall units, and cabinets
- For vertical/ horizontal doors up to 24"W x 42" H
- Detent out
- Made of Steel with steel ball bearings
- Black finish
- Maximum weight capacity: 13.6 kg (30 lbs.)
- Minimum door thickness: 5/8"
- Maximum door thickness: 1-1/4"
- Wood follower strip is provided by the customer
- Cut follower strip is 6" shorter than door height
- Maximum thickness for follower strip is 19 mm (3/4")
- CB123: Includes 35mm hinge kit, 2 slides, 2 pivot blocks, and all mounting hardware; CB1234: Includes 2 slides, 2 pivot blocks, and all mounting hardware
- Note: Hinge mounting plate and hinges are not included with CB1234; Different types to choose from - Must order separately (See Pocket Door System Hinges)
- Inset Frameless Application/Overlay Face Frame Application
- Inset Application for Frameless Cabinets
- Overlay Application for Frameless Cabinet
| Length | Travel | A (See Dimensions) | B (See Dimensions) | C (See Dimensions) | 123 - with 35mm hinges | 1234 - hinges not included |
|---|---|---|---|---|---|---|
| 12" (303mm) | 7-3/8" (188mm) | - | 8-7/8" (224mm) | 6" (154mm) | 408.36.331 | 408.35.332 |
| 14" (354mm) | 9-3/8" (239mm) | - | 8-7/8" (224mm) | 6" (154mm) | 408.36.336 | 408.35.337 |
| 16" (405mm) | 11-3/8" (290mm) | - | 12-5/8" (320mm) | 9-7/8" (250mm) | 408.36.341 | 408.35.342 |
| 18" (456mm) | 13-3/8" (340mm) | - | 13-7/8" (352mm) | 11-1/8" (282mm) | 408.36.346 | 408.35.347 |
| 20" (506mm) | 15-3/8" (391mm) | - | 16-3/8" (416mm) | 13-5/8" (346mm) | 408.36.351 | 408.35.352 |
| 22" (557mm) | 17-3/8" (442mm) | 13-7/8" (352mm) | 18-7/8" (480mm) | 16-1/2" (410mm) | 408.36.356 | 408.35.357 |
| 24" (608mm) | 19-3/8" (493mm) | 13-7/8" (352mm) | 18-7/8" (480mm) | 16-1/2" (410mm) | 408.36.361 | 408.35.362 |
| 26" (659mm) | 21-3/8" (543mm) | 13-7/8" (352mm) | 21-1/2" (544mm) | 18-5/8" (474mm) | 408.36.366 | 408.35.367 |
| 28" (710mm) | 23-3/8" (594mm) | 13-7/8" (352mm) | 24" (608mm) | 21" (538mm) | 408.36.371 | 408.35.372 |
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
303mm (12") to 710mm (28") Lengths
303mm (12") to 710mm (28") Lengths
Description:
This Accuride CB1234 by Hafele is for concealed doors, and will work well with entertainment centers, wall units, and cabinets. Made of steel with a black finish, the Flipper Door System has a maximum weight capacity of 13.6 kg (30 lbs.).
Ship Method:
- Ships via UPS/FedEx Ground
Product Reviews:
 | Wonderful product and service by: Hilary Trammell ✔Verified Buyer from: Houston, TX on: March 9, 2018 |
| Thank you for resolving my cabinet needs and helping me correct my error in the order I placed. Excellent service all the way around! |
|
 | ... by: Willie Noel ✔Verified Buyer from: Nederland, TX on: March 7, 2018 |
| The products I ordered are high quality. However, the clip to snap the hinge is broken. The other three were easy to install and working very well. Hope to have a replacement soon. Person I spoke to was very helpful. |
|
| Works as expected by: Tayler King ✔Verified Buyer from: Athens, GA on: January 12, 2018 |
| Perfect for my Big Green Egg table! |
|
| worked perfectly by: Hal ✔Verified Buyer from: Edmond, Ok on: October 20, 2016 |
| The rolling hinges did exactly what we needed.
First time to use them.
Used them for outdoor TV case
Built folding doors and only need 12" recess because of that, will be doing all our TV cabinets this way and ordering all our rolling hinges from Kitchen source. |
|
| Installs and operates easily and solidly. by: R Emenheiser ✔Verified Buyer from: -, NJ on: January 18, 2016 |
Your questions that we answered:
 | Can the 12 inch pocket door slide be cut-down to fit a 10 inch cabinet? - Asked about product HA-408.36.331 | |
 | No, I am sorry, these are made of metal and we do not recommend cutting them down. We do not have a 10'' option. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| If i wanted a taller door, lets say for a cabinet to house a stackable washer and dryer, could i use 3 hinges/slides on each side and make it work. The cabinet doors are really only larger cabinet doors, but i want the stability and strength of 3 hinges. Would this work? if not you have any suggestions? - Asked about product HA-408.36.346 | |
| Per Hafele, yes, you can apply three hinges if you find it necessary. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| We would like to use a sliding door system on a laundry closet. Can these be used on standard height (80 in.) doors? - Asked about product HA-408.35.372 | |
| These can only be used on vertical/ horizontal doors that measure up to 24"W x 42" H.
These can be used on Door heights up to 78": Click here |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Does the door start to retract before it reaches 90 degrees? I have a 45cm wide door, but only 35cm clearance so I can't open the door 90 degrees before retracting it. Is there some form of hinge that would cover this retracting opening motion? - Asked about product HA-408.36.341 | |
| It sounds like you do not have a large enough opening in order for the door to be able to open 90 degrees, as the door has to be able to open 90 degrees in order for the product to work correctly. All pivoting and pocket doors have this requirement. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Building a cabinet on the porch that for tv that will be shaped more like a triangle than a square. I want a sliding door hinge system that will allow for the doors to slide back into the cabinet when in use. however the hinge needs to swing about 130 degrees so the doors will close, not 90 degrees. Do you have hinges that will move 130 degrees once pulled open to close. - Asked about product HA-408.36.371 | |
| We have 165 degree hinges but not 130 degrees, you can order HA-408.36.371 on that page, and replace the hinges with this hinge item: HA-329.07.618 (call to order) which is the 165 degree hinge and can still use the same mounting plates as provided in the kit. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| why can't these slides be used on a longer door (57")? I want to use it for a horizontal mount. - Asked about product HA-408.36.346 | |
| These hinges are not recommended for a horizontal mounting, you would want to look into a lift up fitting: Click here |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| can the door be mounted horizontally. i would like to lift it up and slide it in across the top of the opening? - Asked about product HA-408.36.346 | |
| This would not work on a door mounted horizontally for a lift up mechanism. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Is this priced for a single door or a pair? - Asked about product HA-408.36.361 | |
| HA-408.36.361 includes a 35mm hinge kit, 2 slides, 2 pivot blocks, and all mounting hardware. |
|
| 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
| Is that one pair of slides per price or one slide? - Asked about product HA-408.36.356 | |
| This item is Supplied with:
2 slides 2 pivot blocks and all mounting hardware 2 clip on hinges |
|
| 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
| Can you please give me the advantages/disadvantages of with or without hinges? - Asked about product HA-408.36.361 | |
| Per Hafele, the 35mm Salice hinges option are made to work with this item. The disadvantage of purchasing the system without the hinges, is that it is not guaranteed that other hinges would work for the same application, however they state you can try using other brand hinges. |
|
| 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
| Do I need the CB 123 or 1234 for overlay? - Asked about product HA-408.36.361 | |
| That would be dependent on what you need, the 123 is supplied with the hinge kit, 2 slides, 2 pivot blocks and mounting hardware. The 1234 does not include a hinge kit. |
|
| 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
| Does this kit work for overlay? - Asked about product HA-408.36.361 | |
| This item is for Inset Frameless or Overlay Applications. The overlay however would be minimal, around 9mm. |
|
| 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
| How much room do I need to allow for the door and hinge system? - Asked about product HA-408.35.362 | |
| You will need a Horizontal max. of 24"W and a Vertical max. of 42"H. The Thickness depends on whether the item will be inset or overlayed onto a frameless or framed application. The hinge page shows more detailed information - Click here |
|
| 20% of 10 people found this useful. Was this useful to you? Yes (2) | No (8) | ||
| Can a 18" slide be cut down to a 17-1/2" slide in order to reduce the amount of door protruding from the cabinet that a 16" slide would produce? Thanks - Asked about product HA-408.35.347 | |
| Unfortunately these slides can not be cut, you would have to go down to the next size of 16" L. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
An Aoife Company LLC Store
500 Bic Drive, Suite 103, Milford, CT 06461
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
