1.800.667.8721 or Live Chat (9AM - 6PM EST)
Hafele Cabinet Door Swing-up Fittings - E-Z Open - Lid Stay, Silver, 235mm (9-1/4") Length, Holds 22.5 lbs. or 33.7 lbs.
Illustration
Available to Hold Different Weights
Available to Hold Different Weights
Lid Stay
Available to Hold Different Weights
Available to Hold Different Weights
Included Brackets
Step 1: Choose Lid Stay
Step 2: Order Optional Door Mounting Bracket for Aluminum Frame: Click here
Step 2: Order Optional Door Mounting Bracket for Aluminum Frame: Click here
Shop for similar items:
Features:
**Values indicated are guidelines only. Trial application is recommended. Guidelines based on two lid stays per door.
- Cabinet Door Swing-up Fittings - E-Z Open - Lid Stay
- For wood or aluminum doors with 35 mm (1-3/8") profile width or wider
- Can be used for a face frame application
- Secure holding in open and closed positions
- 110º concealed hinges and mounting plates are required for installation (not included)
- Includes 2 springs, 2 cabinet brackets, and 2 door brackets
- Load bearing capacity: 22.5 lbs. or 33.7 lbs. per pair of springs
-
Soft & Silent Closing
- Smooth motion and stopping
- Silver finish
- Made of steel
- Uses #6 Raised Head Screws (not included)
- Door Mounting Bracket available for aluminum frame profiles of less than 35 mm (1-3/8") wide (See Accessories)
| Door Height | Door Weight: 2-3 kg (5-7 lbs.) | Door Weight: 3.5-4.5 kg. (8-10 lbs.) | Door Weight: 5-6 kg. (11-13 lbs.) | Door Weight: 6.5-9 kg. (14-20 lbs.) |
|---|---|---|---|---|
| 254–305mm (10-12") | 373.71.901 | 373.71.901 | 373.71.901 | 373.71.902 |
| 330–380mm (13-15") | 373.71.901 | 373.71.901 | 373.71.901 | - |
| 406–457mm (16-18") | 373.71.901 | 373.71.901 | 373.71.902 | - |
| 483–533mm (19-21") | 373.71.901 | 373.71.902 | - | - |
| 559–610mm (22-24") | 373.71.901 | 373.71.902 | - | - |
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
235mm (9-1/4") Length
235mm (9-1/4") Length
Description:
For wood or aluminum doors with 35 mm (1-3/8") profile width or wider, the Cabinet Door Swing-up Fittings - E-Z Open - Lid Stay by Hafele can be used for a face frame application. Able to hold 22.5 lbs. or 33.7 lbs., the Lid Stay has a silver finish and features smooth motion and stopping.
Ship Method:
- Ships via UPS/FedEx Ground
Product Reviews:
 | Love it by: ruth ✔Verified Buyer from: Peterson, mn on: May 18, 2022 |
| When I finally got the product, the first shipment had everything except the brackets to attach to the cabinet door and frame, I immediately put in up and loved it. No more bracing the cabinet door with my head or a piece of wood. I would recommend this product without reservation. |
|
| Works exactly as advertised by: Marvin Duncan ✔Verified Buyer from: Eclectic , AL on: March 28, 2022 |
| Item received sooner than expected. Actually works better than advertised! |
|
| Great product, easy installation by: Ed B ✔Verified Buyer from: Amherst, NH on: February 23, 2021 |
| Just what I needed. Easy installation. Very satisfied!!! |
|
| My Wife Said It's About Time by: Larry ✔Verified Buyer from: Boerne, TX on: July 24, 2020 |
| If you have top hinge doors, you know how hard it is to load and unload the cabinet. Now it isn't. |
|
| Great product by: Melissa ✔Verified Buyer from: Belvidere, IL on: June 25, 2020 |
| Great product! They were perfect for my storage bench lid. Shipping was fast |
|
| Worked as expected by: Kurt Nelson ✔Verified Buyer from: Fresno, CA on: July 3, 2019 |
| Just put them in my RV to hold up the swing down cabinet doors. Only needed one per door. Worked great. |
|
| Great Product by: Ray ✔Verified Buyer from: Miami, FL on: January 29, 2019 |
| Fast shipping. Items were exactly aS described. Great quality. |
|
| Great product. by: Petra ✔Verified Buyer from: Jefferson, Ga on: December 10, 2018 |
| Works well by: Mark ✔Verified Buyer from: Littleton, MA on: January 18, 2016 |
| The lifts came in good time with appropriate instructions. They were easy to installed and One lifts the door that previously had two to operate. I placed one on each over head cabinet door and left the non-working ones in place. They now operate like new. I am a bit concerned with the angled loads on the hinges, but we will see how it works over time. I did think the costs were a bit high at roughly $25 each, but if they last, it will be worth it. |
|
Your questions that we answered:
 | The description says that the 110º concealed hinges and mounting plates must be purchased separately. Can you please provide the part number for the hinges shown in the photograph. Thank you - Asked about product HA-373.71.901 | |
 | Per Hafele, the hinge is not based off the picture. You need to select the hinge for your specific application, based off overlay, depth, etc. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Is it possible to replace these fittings without removing the brackets? - Asked about product HA-373.71.901 | |
| Because of how the fitting sits in the bracket, both would need to be removed when replacing. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| I have either these or something identical to these, but the previous owner had them installed. The doors used to stay up on their own until I pulled them shut - Asked about product HA-373.71.901 | |
| These fittings are spring loaded, so unless you intentionally shut them, they will stay open. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Does the door have open to 110 degrees in order to lock open and then unlock to close? If door cannot be opened 110 degrees to to soffit, can the latch be installed slightly pre-extended in the closed position? - Asked about product HA-373.71.901 | |
| Per Hafele, it does have to open 110 degrees. It cannot be installed pre-extended or it would push the door open automatically. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| Flap door is 17 3/8 inches high with a weight of 30lbs will this product lift the door, hold the door and soft close the door? - Asked about product HA-373.71.902 | |
| Item HA-373.71.902 is capable of holding up to 33.7 lbs. It also comes with soft close, and as long as the door does not exceed 33.7 lbs, it will hold the door open. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| I wanted to use this lift on my bottom cabinet doors for extra counter space , can I ?if I can how much can they hold or any other products you have for these purpose? Thank you - Asked about product HA-373.71.902 | |
| Hafele does not recommend using this item for that purpose. We do carry a Pull-Out Kitchen Table System that might work for your situation: Click here |
|
| 75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1) | ||
| Assuming that the 33.7 pound rating is for each rod assembly, that allows a 67 pound lift. Can I install two gas shocks on a single door that weighs 70 pounds and install a hold-open device to actually hold the door open. The gas shocks would be an "assisting" device that would "help" the operator get the door open and the hold-open device would keep it there while the cabinet is in use. - Asked about product HA-373.71.902 | |
| As per Hafele, the 33.7 pound weight is using 2 springs already, so this will not work. |
|
| 75% of 4 people found this useful. Was this useful to you? Yes (3) | No (1) | ||
| I need to stop the door from opening past about 75 degrees (not the full 90 degrees pictured) so the handles do not hit my ceiling. Can I accomplish this by mounting the lower bracket an inch or 2 farther back in my frameless cabinet? I assume I'd need to fully extend the arm after mounting the door bracket to see where the lower bracket would land at my desired extension... - Asked about product HA-373.71.901 | |
| You can accomplish what you are wanting to do by mounting the lower bracket back farther. Also, please be sure to review the weight load capacity for this item. The ha-373.71.901 can hold up to 25 Lbs. but if your item is heavier, the 373.71.902 holds up to 33.7 lbs. |
|
| 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
| I am confused by the description saying it can hold 22.5 lbs. I have an 8 lb/18" door. If I use this swing how much force will it take to pull it down to close? Is that force adjustable? thanks, Tom - Asked about product HA-373.71.901 | |
| Item: HA-373.71.901 - the concealed hinges can hold up to 22 lbs each; the spring loaded hinges would assist in the opening of the cabinet, but the force would not be adjustable. |
|
| 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
| How does it lock? Do the rods bend in it on itself? - Asked about product HA-373.71.902 | |
| It is spring loaded, so it does not bend or lock. Once the cabinet bracket and door bracket are attached, the weight of the door along with the stay allows it to "lock". |
|
| 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) | ||
| is this price per set or per ea hinge? - Asked about product HA-373.71.901 | |
| This item includes 2 springs, 2 cabinet brackets, and 2 door brackets. |
|
| 100% of 3 people found this useful. Was this useful to you? Yes (3) | No (0) | ||
An Aoife Company LLC Store
6 Landmark Square, 4th Floor, Stamford, CT 06901
Tel: (203) 374-5425 Fax: (203) 373-0810
email: support@kitchensource.com
