Models | Quarts | Gallon | Overall Dimensions | Minimum Frameless Opening | Minimum Face Frame Opening | Weight (lbs) | Finish |
---|---|---|---|---|---|---|---|
RAS-4WCTM-15DM2-343-FL | 2 x 27 | 2 x 6.75 | 13-1/2'' W x 23-1/4'' D x 17-3/4'' H | 13-1/2'' W x 23-1/2'' D x 17-7/8'' H | 13-1/2'' W x 23-1/2'' D x 17-7/8'' H | 16.8 | White |
RAS-4WCTM-21DM2-495-FL | 2 x 35 | 2 x 8.75 | 19-1/2'' W x 23-1/4'' D x 17-3/4'' H | 19-1/2'' W x 23-1/4'' D x 18'' H | 19-1/2'' W x 23-1/4'' D x 18'' H | 23 | White |
RV-4WCTM-18DM2-419-FL | 2 x 35 | 2 x 8.75 | 16-1/2'' W x 22-3/4'' D x 17-7/8'' H | 16-1/2'' W x 23'' D x 18'' H | 16-1/2'' W x 23'' D x 18'' H | 19.5 | White |
RAS-4WCTM-1850DM2-419-FL | 2 x 50 | 2 x 12.5 | 16-1/2'' W x 23-1/4'' D x 21-3/4'' H | 16-1/2'' W x 23-1/2'' D x 21-7/8'' H | 16-1/2'' W x 23-1/2'' D x 21-7/8'' H | 20.2 | White |
Installation Instructions (PDF) |
How to Measure Base or Lower Cabinets for Frameless or Face Frame (PDF) |
Care and Maintenance (PDF) |
Outstanding product - does what it should by: Craig Goodwin ✔Verified Buyer from: Cumming, GA on: October 23, 2013 |
|
We had custom cabinets installed during a kitchen renovation. The Rev-A-Shelf waste bin solved where to put the trash and recyclables (i.e.: in the 19" base cabinet between the sink base and the dishwasher.) This design hangs the trash cans. There is virtually no place for debris to collect over time. Install instructions are not great. I shimmed our 17 1/2" opening down to 16 1/2" with two pieces of 1/2" plywood. Also I had to shim with washers to keep the unit from popping out of its slides. At the recommended 20 1/8" height, the unit hit the drawer above. I lowered (i.e.: slide midpoint) to 17 1/2". That left ~ 1/8" at top and ~ 1/4" at bottom of the trash cans for clearance. A very nice fit and very professional-looking product and install. Unfortunately, no room for optional lid with this install (i.e.: since there is a drawer in the cabinet above trash cans.) Overall, completely satisfied. Unit appears to be extremely well-made and very strong. |
|
Excellent trash system by: Penny C. ✔Verified Buyer from: San Diego, CA on: December 11, 2012 |
|
Excellent trash system. Slightly damaged in shipping but not worth sending back so only 4 stars our of 5. Works great, slides smoothly. Would purchase again and recommend to a friend. |
|
I have a box style cabinet with an opening of 17'W, 21'H, 24'D. The door width is 18.25 with 2.25' on either side to mount the new bin holder. If the box is too wide I am assuming I could use a wood spacer. Thank you - Asked about product RAS-4WCTM-18DM2-419-FL | ||
Shims can be used to fill in the space between the pull-outs/slides and the side of cabinet. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
Does this model have SOFT close door and made specifically for frame-less cabinet? - Asked about product RAS-4WCTM-18DM2-419-FL | ||
This pull out trash can is for frameless cabinets, however, it is not Soft Closing. Here is a link to the soft close option: Click here . NOTE: Please, review dimensions, they are not the same. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
I assume this waste bin RAS-4WCTM-1850DM2-419-FL can be installed in face-framed cabinets as long as the minimum opening dimensions are met. Since I have face-framed cabinet, assume I'll have to install shim along side of cabinet on which to mount the slides. Is that correct? - Asked about product RAS-4WCTM-1850DM2-419-FL | ||
This model is a frameless cabinet, not a framed cabinet. If you had a framed cabinet you would need the shim. You can install it as long as the dimensions are correct. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||