| Hi,
I have a granite island that is 102" x 48"
I have cabinets under more than half of the top and just want to make sure that 2 of the 3 1/4" square legs are enough support for the 50" overhang. I also have the floor brackets in my cart. - Asked about product RI-CTB83 |
| | With the shelves being under a portion of the granite, 2 of the Katrina square column table legs 3-1/8 inches will be sufficient to support the weight of the island top.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Are these adjustable? I need three 35" in length.
- Asked about product RI-CTB83 |
| | There is an adjustable level on RI-CTB83 that would add 1/2" to the height.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Is there any chance we could get 2 at 45" high? We love these, and also need 4 at 34.75". thank you - Asked about product RI-CTB82 |
| | The tallest height available for item #RI-CTB82 is 40-3/4" high. The 34-3/4" height is a stocked item and can be ordered at any time.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| We are putting in an island made of quartzite that will be 10' long by 3' wide - how many bases would be needed? - Asked about product RI-CTB83 |
| | Per the manufacture, if you are going to have 1 end of the island against the wall for support, you should use at least 4 legs. If you are going to be using the legs and have the island freestanding, you would need at least 6 legs. If you are planning on having the island be stationary, you should also purchase the mounting adapters to fasten the bases directly to the floor for additional support.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Can the pedestal be cut down to 30"? - Asked about product RI-CTB83 |
| | Yes, this table base height is customizable for an additional fee. Please contact our customer service department directly to place your order at 800-667-8721.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| What is the adjustable glide? How much adjustment does this provide?
Thanks! - Asked about product RI-CTB83 |
| | The adjustable level glide helps keep your installation straight. There is about a half an inch of adjustability with the glide.
|
| | 100% of 1 people found this useful. Was this useful to you? Yes (1) | No (0) |
|
| We are looking to hold up a granite buffet that will be cleated to the wall, extend out 24". We would like to use these legs to support the front portion of the buffet - Asked about product RI-CTB83 |
| | Each leg can support about 250lbs, so supporting that buffet should be fine.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Will 2 of these at 34 3/4" high support a counter top (48" x 84") made of concrete. The overhang is 24" of the 48" width. The other 24" is over the cabinetry. - Asked about product RI-CTB83 |
| | Two of these legs will absolutely be able to handle your concrete top. You would also have the option to bolt down to the floor for some added strength.
|
| | 0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) |
|
| Is the listed price for a set of four legs or is that the cost of one leg? - Asked about product RI-CTB84 |
| | This is the cost of one leg. They are sold individually.
|
| | 100% of 3 people found this useful. Was this useful to you? Yes (3) | No (0) |
|