... by: Marvin Koerner ✔Verified Buyer from: Chicago, IL on: March 9, 2021 |
|
Great product it was the perfect item for our stainless counters |
|
... by: M ✔Verified Buyer from: Lincoln, CA on: December 16, 2020 |
|
... by: M ✔Verified Buyer from: Lincoln, CA on: December 16, 2020 |
|
Chic modern look! by: Jennifer A. McCall ✔Verified Buyer from: Victor, Ne on: April 13, 2020 |
|
I have had this pedestal installed in two of my remodels and have been very pleased with both functionality and looks. Excellent quality and good customer service. |
|
Great Buy! by: Shimmy's Açai ✔Verified Buyer from: Jefferson Valley, NY on: January 30, 2020 |
|
The stainless steel color legs are exactly what my shop needed. They support the bar counter i wished to support and they look great! |
|
Excellent product! by: LJL Interiors LLC ✔Verified Buyer from: New York, NY on: January 17, 2020 |
|
Perfect Solution for my granite island by: R J M ✔Verified Buyer from: Island Park, NY on: December 7, 2016 |
|
I recently added a granite island for my kitchen and needed legs to support the extended piece that went beyond the cabinet. These legs were perfect and look great. |
|
great by: emporium kitchen design ✔Verified Buyer from: miami, Fl on: January 5, 2014 |
|
everything i expected by: michael pitcavage ✔Verified Buyer from: santa rosa, ca on: August 16, 2012 |
|
Good afternoon, I was wanting to gain some clarification on the bottom plate for this particular pole. Is there a plate that shows? Or is it more like an anchoring foot where you would not visualize anything but the pole at the bottom? Thank you Tracy - Asked about product RI-CTB22 | ||
The ballast plate of RI-CTB22 is bolted with 22 x 8MM bolt, the actual column of the base acts as a cover. Once installed- you will not physically see the bolt. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
What is the finish? Polished? or ??? - Asked about product RI-KATR60-D | ||
The Steelbase Katrina Single Leg Stainless Steel Table Base has a slightly brushed finish, and not a mirror finish. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
It said the height adjustment is 0.5". Is it both up and down half inches or just extend half inch? - Asked about product RI-KATR60-C | ||
Just the bottom footing is adjustable for item RI-KATR60-C. There is a threading that allows you to change the height. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
would these work for 8ft long table - Asked about product RI-KATR76PC-B | ||
This can work for an 8 foot table, however you might need support in the middle too depending on the material and its thickness. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
Could you please explain the mounting adapter? I can't find any info on them. Are they available for the 2-9/25" leg? I need 2 legs to support a kitchen peninsula which is supported on the wall side but free standing on the other side. Builder has requested the leg be mounted o the floor. - Asked about product RI-KATR60-C | ||
The mounting adapter is a solid boltdown foot for the Katrina legs. It will work with the 2-9/25" legs. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
Can these be made in white powder coat? Also- what is the difference between D,C and B in product description? Thanks - Asked about product RI-KATR76PC-B | ||
Unfortunately, they are only available in powder coated black or stainless steel. The D stands for dining height, the C stands for counter height, and the B stands for bar height. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||
What is the weight load these can bear? - Asked about product RI-KATR60-C | ||
As far as the table top goes, the leg should be able to handle around 200-250 lbs, depending on the position of the leg under the table and size of the table. |
||
0% of 0 people found this useful. Was this useful to you? Yes (0) | No (0) | ||