Hafele Medical Drawer Inserts

View all from Hafele

Design A

Design B & C

Design A Specs

Design B Specs

Design C Specs

Click here to view available designs/sizes

Features:

Made of Gloss white polystyrene
Flat (1-1/8" H) or deep (2-1/8" H) models
Design A is designed for dental mirrors, tweezers, and other medical instruments
Design B & C have nine partitions to store medical materials and instruments
Design A and Design B are 1-1/8" H and Design C is 2-1/8" H
Can be trimmed with a circular saw to sizes indicated by broken lines (in the Dimensions section below)

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

Specifications

Description:

These medical drawer inserts are 2-1/4" high and have nine partitions to store medical materials and instruments. The inserts are made of gloss white polystyrene and can be trimmed with a circular saw to the indicated measurements.

Additional Information:

Specifications

Ship Method:

Ships via UPS/FedEx Ground

May we also suggest...

Your questions that we answered:

	It states that inserts can be trimmed with a circular saw to the sizes indicated by broken lines. We would not need the three partitions (2 rectangle/1 square) on the lower portion of the drawer insert. Could you give me the dimensions without those partitions? Also, would you trim them prior to sending or is that something we would be responsible for doing? Thanks, Emily Stewart - Asked about product HA-556.66.763
		Yes this tray can be trimmed however, you will need to trim yourself. We don’t have the exact measurements available. We calculated the lower portion of the insert that you wish to remove to be around 100-120mm (roughly around 4-3/4’’) so, we believe the tray without the lower partitions should be around 260-280mm or around 10-1/4’’. See ‘Specifications’, here: Click here
		0% of 0 people found this useful. Was this useful to you? Yes (0) \| No (0)